Xylose-lysine model systems: The effect of pH on the volatile reaction products

Aqueous molal solutions of xylose and lysine (initial pH 4–9) were refluxed either with control of the pH at 5–0 or without pH control (final pH 2–6). Analysis by gas chromatography (GC) and GC-mass spectrometry resulted in the identification of 58 and 28 compounds, respectively, from the two systems. Furans were the main reaction products in both systems and 2-furfural alone comprised 522 and 999 g kg^?1 of the volatiles, respectively, from the systems with final pH values of 5–0 and 2–6. Maintaining the pH at 5–0 resulted in a higher yield and greater numbers of nitrogen-containing compounds, and monocyclic pyrroles, pyridines and 2,3-dihydro-l H-pyrrolizines were identified only in that system. Aliphatic compounds, alicyclic compounds, benzene derivatives. l-(2–furfuryl)pyrroles and pyrazines were also identified. This investigation is the first report of the formation of 2.3-dihydro-l H-pyrrolizines in a model system containing lysine as the amino compound; a possible mechanism is proposed.     

Quantitation of age-related mitochondrial DNA deletions in rat tissues shows that their pattern of accumulation differs from that of humans

We studied the postnatal development of the release of acetylcholine (ACh) and of presynaptic, release-inhibiting muscarinic autoreceptors in the rat hippocampus. To this end, hippocampal slices (350 microns thick) from rats of various postnatal ages (postnatal day 3 [P3] to P16) were preincubated with [3H]choline and stimulated twice (S1, S2: 360 pulses, 2 ms, 3 Hz, 60 mA) during superfusion with physiological buffer containing hemicholinium-3 (10 microM). In parallel, the activities of hemicholinium-sensitive high-affinity choline uptake (HACU, in synaptosomes) and of choline acetyltransferase (ChAT, in crude homogenates) were determined as markers for the cholinergic ingrowth. In hippocampal slices preincubated with [3H]choline, the electrically evoked overflow of 3H at S1 increased from 0.11 (P3) to 0.81% of tissue 3H (P16), the latter value being still much lower than that of hippocampal slices from adult rats (2.89% of tissue 3H). Already at P3 the evoked overflow of 3H was Ca(2+)-dependent and sensitive to tetrodotoxin, indicating an action potential-evoked exocytotic mechanism of ACh release. The muscarinic agonist oxotremorine (1 microM) significantly inhibited the evoked ACh release in hippocampal slices with increasing effectivity from P4 to P16; no significant effect was detectable at P3. The ACh esterase inhibitor physostigmine and the muscarinic antagonist atropine (1 microM, each) exhibited significant inhibitory and facilitatory effects, respectively, only at P15-16. The specific activities of both hippocampal HACU (pmoles/mg protein/min) and ChAT (nmoles/mg protein/min) continuously increased from P3 to P16. It is concluded (1) that cholinergic nerve terminals arriving at the hippocampal formation during postnatal ingrowth are already endowed with the apparatus for action potential-induced, Ca(2+)-sensitive (exocytotic) ACh release; (2) that, in contrast, the expression of presynaptic muscarinic autoreceptors on these cholinergic axon terminals is delayed; and (3) that autoinhibition due to endogenous ACh develops even later, probably when the density of presynaptic terminals in the hippocampus and hence, the concentration of released ACh has reached a suprathreshold value.     

The fatigue life of contoured cobalt chrome posterior spinal fusion rods

Intraoperative contouring of posterior rods in lumbar arthrodesis constructs introduces stress concentrations that can substantially reduce fatigue life. The sensitivity of titanium (Ti) and stainless steel (SS) to intraoperative contouring has been established in the literature; however, notch sensitivity has yet to be quantified for cobalt chrome (CoCr), which is now being advocated for use in posterior arthrodesis constructs. The goal of this study is to evaluate the sensitivity of CoCr rods to intraoperative contouring for posterior lumbar screwrod arthrodesis constructs. In this paper lumbar bilateral vertebrectomy models are constructed based on ASTM F1717-01 with curved rods (26-30 degrees total curvature) and poly-axial pedicle screws. Three types of constructs are assembled: first, 5.5 mm SS rods with SS screws (6.5 x 35 mm), second, 6.0 mm Ti rods with Ti screws (7.5 x 35 mm), and third, 6.0 mm CoCr rods with Ti screws (7.5 x 35 mm). All specimens are tested at 4 Hz in dynamic axial compression-bending with a load ratio of ten and maximum load levels of 250, 400, and 700 N until run-out at 2 000 000 cycles. Results are presented that show that the fatigue life of CoCr constructs tend to be greater than Ti constructs at all levels. At the 400 N maximum loading, CoCr lasts an average of 350 000 cycles longer than the Ti constructs. The CoCr constructs are able to sustain the 250 N load until run-out at 2 000 000 cycles but they fail at high load levels (maximum 700 N). The CoCr constructs fail at the neck of the Ti screw at high loads whereas Ti screws fail at the notch induced by contouring. Since CoCr is compatible with magnetic resonance imaging and has high static strength characteristics, the results of this study suggest that it may be an appropriate substitute for Ti.     

Estimation of stream channel geometry in Idaho using GIS-derived watershed characteristics

This paper describes estimation of stream channel geometry with multiple regression analysis of GIS-derived watershed characteristics including drainage area, catchment-averaged precipitation, mean watershed slope, elevation, forest cover, percent area with slopes greater than 30 percent, and percent area with north-facing slopes greater than 30 percent. Results from this multivariate predictor method were compared to results from the traditional single-variable (drainage area) relationship for a sample of 98 unregulated and undiverted streams in Idaho. Root-mean-squared error (RMSE) was calculated for both multiple- and single-variable predictions for 100 independent, random subsamples of the dataset at each of four different subsample levels. The multiple-variable technique produced significantly lower RMSE for prediction of both stream width and depth when compared to the drainage area-only technique. In the best predictive equation, stream width depended positively on drainage area and mean watershed precipitation, and negatively on fraction of watershed consisting of north-facing slopes greater than 30%. Stream depth depended positively on drainage area and precipitation, and negatively on mean watershed elevation. Our results suggest that within a given physiographic province, multivariate analysis of readily available GIS-derived watershed variables can significantly improve estimates of stream width and depth for use in flow-routing software models.     

Coherent lidar airborne wind sensor II: flight-test results at 2 and 10 νm

The use of airborne laser radar (lidar) to measure wind velocities and to detect turbulence in front of an aircraft in real time can significantly increase fuel efficiency, flight safety, and terminal area capacity. We describe the flight-test results for two coherent lidar airborne shear sensor (CLASS) systems and discuss their agreement with our theoretical simulations. The 10.6-μm CO(2) system (CLASS-10) is a flying brassboard; the 2.02-μm Tm:YAG solid-state system (CLASS-2) is configured in a rugged, light-weight, high-performance package. Both lidars have shown a wind measurement accuracy of better than 1 m/s.     

Connection and coordination: the interplay between architecture and dynamics in evolved model pattern generators

We undertake a systematic study of the role of neural architecture in shaping the dynamics of evolved model pattern generators for a walking task. First, we consider the minimum number of connections necessary to achieve high performance on this task. Next, we identify architectural motifs associated with high fitness. We then examine how high-fitness architectures differ in their ability to evolve. Finally, we demonstrate the existence of distinct parameter subgroups in some architectures and show that these subgroups are characterized by differences in neuron excitabilities and connection signs.     

Retina subjected to components of ischemia in vitro. Selective vulnerability and minimum lethal exposure of neurons and glia to oxygen and/or glucose deprivation and to loss of exchange with incubating medium

Rabbit retinas were incubated at 37 C in media lacking oxygen, glucose, or both, or sealed in a small compartment without medium to convert them to a "closed system." They were then returned to control medium before being fixed for microscopy. Other retinas were incubated only in control medium and then fixed. Conversion of the retina to a closed system caused irreversible damage to all cell types within 40 minutes. Combined deprivation of oxygen and glucose also irreversibly damaged the neuronal cells within 40 minutes, but Mueller cells,the principal glial cells of the retina, were not irreversibly altered by 90 minutes of the deprivation. Deprivation of oxygen alone caused irreversible damage to receptor cells in 80 minutes, but the cells of the inner nuclear layer, ganglion cells, and Mueller cells retained normal structure for at least 180 minutes. Deprivation of glucose alone damaged receptor cells in 160 minutes and the other neuronal cells in 180 minutes, but did not irreversibly damage Mueller cells by 200 minutes.     

N-(carboxymethyl)lysine content of foods commonly consumed in a Western style diet

The potential adverse effects on health of diet-derived advanced glycation end-products (AGEs) is of current interest, due to their proposed involvement in the disease progression of diabetic and uraemic conditions. However, accurate information about levels of AGEs in foods is lacking. The objective of this investigation was to determine the level of one particular AGE, N^ε-(carboxymethyl)lysine (CML), a marker of AGE formation, in a wide range of foods commonly consumed in a Western style diet. Individual foods (n = 257) were mixed, lyophilised, ground, reduced, fat-extracted, hydrolysed, and underwent solid-phase extraction. Extracts were analysed by ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). Cereal (2.6 mg/100 g food) and fruit and vegetable (0.13 mg/100 g food) categories had the highest and lowest mean level of CML, respectively, when expressed in mg/100 g food. These data can be used for estimating potential consumer intakes, and provide information that can be used to educated consumers on how to reduce their CML intake.     

Creep and tensile properties of press molding joined GMT-sheets

GMT-sheet is used in automobile bumper with high rigidity and strength, and its joining strength is influenced by lap length, one of the joined molding conditions. Fracture strength was calculated by dividing fracture load with cross-sectional area. Total five repeated measurements were made to obtain the average value. Tensile test was conducted at room temperature for 10 specimens. In addition, the effect of compression ratio on creep and tensile performance during lap joined molding was discussed. With increasing lap length, the lap joining efficiency of GMT-sheet was increased. However, higher compression ratio reduced the joining efficiency. Creep test on GMT-sheet showed abrupt fracture without tertiary creep. This can be explained by the weak thermal resistance of the resin. If GMT-sheet was exposed to high temperature for a long time, it was easily failed by external force.     

Characterization of melanoidins from a glucose-glycine model system

The properties of melanoidins prepared from glucose and glycine (GG) were investigated by a three step purification protocol consisting of dialysis, gel filtration at high ionic strength and ion metal affinity chromatography. The high molecular weight fraction obtained in the GG system is responsible for 80% of the total brown colour and its antioxidative ability was about 1/4 of that of Trolox measured by the inhibition of linoleic acid oxidation. GG melanoidins have good affinity towards Cu (II) (32% bound to the resin) while it is much lower towards Pb (II) (10%) and Fe (II) (5%). Capillary zone electrophoresis analysis suggests that GG melanoidins are positively charged, although no signal was observed analysing melanoidins by matrix-assisted laser desorption-ionisation time-of-flight mass spectrometry (MALDI-TOF/MS).