Technical review: Improvement of mechanical properties and suitability towards armor applications – Alumina composites

Ceramic Matrix Composites (CMCs) have many interesting properties, mainly light weight, cost efficiency, low density, high compressive strength, high hardness and durability. Hence, they emerged as a boon to the development of personnel armors in the past. The current work aims to review various new methodologies adapted for the reinforcement of Alumina (Al₂O₃) CMCs in recent times, including some of the interesting results obtained with respect to mechanical properties, suitability of the synthesized composites for armor applications, and the upcoming reinforcement trends. Finally, studies related to reinforcement in Al₂O₃ CMCs, specifically towards armor applications have been consolidated to arrive at some of the important inferences for concluding reasonably.     

Role of Zinc (Zn) in Human Reproduction: A Journey from Initial Spermatogenesis to Childbirth

Zinc (Zn), the second-most necessary trace element, is abundant in the human body. The human body lacks the capacity to store Zn; hence, the dietary intake of Zn is essential for various functions and metabolism. The uptake of Zn during its transport through the body is important for proper development of the three major accessory sex glands: the testis, epididymis, and prostate. It plays key roles in the initial stages of germ cell development and spermatogenesis, sperm cell development and maturation, ejaculation, liquefaction, the binding of spermatozoa and prostasomes, capacitation, and fertilization. The prostate releases more Zn into the seminal plasma during ejaculation, and it plays a significant role in sperm release and motility. During the maternal, labor, perinatal, and neonatal periods, the part of Zn is vital. The average dietary intake of Zn is in the range of 8–12 mg/day in developing countries during the maternal period. Globally, the dietary intake of Zn varies for pregnant and lactating mothers, but the average Zn intake is in the range of 9.6–11.2 mg/day. The absence of Zn and the consequences of this have been discussed using critical evidence. The events and functions of Zn related to successful fertilization have been summarized in detail. Briefly, our current review emphasizes the role of Zn at each stage of human reproduction, from the spermatogenesis process to childbirth. The role of Zn and its supplementation in in vitro fertilization (IVF) opens opportunities for future studies on reproductive biology.     

Electrocatalytic Reduction of CO2 to Ethylene by Molecular Cu‐Complex Immobilized on Graphitized Mesoporous Carbon

The electrochemical reduction of carbon dioxide (CO₂) to hydrocarbons is a challenging task because of the issues in controlling the efficiency and selectivity of the products. Among the various transition metals, copper has attracted attention as it yields more reduced and C2 products even while using mononuclear copper center as catalysts. In addition, it is found that reversible formation of copper nanoparticle acts as the real catalytically active site for the conversion of CO₂ to reduced products. Here, it is demonstrated that the dinuclear molecular copper complex immobilized over graphitized mesoporous carbon can act as catalysts for the conversion of CO₂ to hydrocarbons (methane and ethylene) up to 60%. Interestingly, high selectivity toward C2 product (40% faradaic efficiency) is achieved by a molecular complex based hybrid material from CO₂ in 0.1 m KCl. In addition, the role of local pH, porous structure, and carbon support in limiting the mass transport to achieve the highly reduced products is demonstrated. Although the spectroscopic analysis of the catalysts exhibits molecular nature of the complex after 2 h bulk electrolysis, morphological study reveals that the newly generated copper cluster is the real active site during the catalytic reactions.     

Cost optimization of maintenance scheduling for a system withassured reliability

Systems which have to work at or below a maximum acceptable failure rate should be maintained at predetermined points such that the failure rate does not exceed the acceptable level. As the system ages, the post-maintenance failure rate of the system drops to some newer one, unless the system has been replaced, but does not restore the system to the original state. A branching algorithm with effective dominance rules that curtail the number of nodes created is presented; this algorithm determines the number of maintenance interventions before each replacement in order to minimize the total cost over a finite time horizon. The model considers inflationary trends. A numerical example and computational experience are presented. The authors treat the maintenance cost as constant and successive simple-maintenance intervals as decreasing. Though the cost/maintenance is assumed constant, any increasing maintenance cost function could be incorporated. The optimum solutions depend on the constant improvement factor, first simple-maintenance point, rate of increase in acquisition cost, maintenance cost factor, and planning period     

Metal distribution in alumina/aluminium composites synthesized by directed metal oxidation

The directed oxidation of molten aluminium alloys by vapour phase oxidants can be used to produce Al₂O₃/Al ceramic matrix composites. The toughness of these composites is determined by the amount and the nature of metal distribution in the composite. This paper addresses the problem of understanding the metal distribution in Al₂O₃/Al composites and its dependence on growth temperature. Electrical conductivities and microstructures of Al₂O₃/Al composites synthesized by directed oxidation of Al-5056 alloy are investigated. The high conductivity of the Al₂O₃/Al composite compared to sintered Al₂O₃-4 wt% MgO is shown as a proof of the presence of some continuous metal channels in the composite. The activation energy forthe diffusion of the dominant charge carrier in the oxide matrix is found to be 1.36 eV from the analysis of the conductivity data. Both the amount of metal in the composite and the extent of interconnection of the metal channels decrease with increasing growth temperature. The observed changes in microstructure with temperature can be explained by considering temperature variations of grain boundary energies in alumina and the alumina/aluminium interfacial energy. The metal content of the Al₂O₃/Al composites, prepared by directed oxidation of Al-5056 alloys, can be tailored by the choice of the growth temperature.     

Structural health monitoring of railway tracks using IoT-based multi-robot system

Neural Computing and Applications - A multi-robot-based fault detection system for railway tracks is proposed to eliminate manual human visual inspection. A hardware prototype is designed to...     

An expressive framework and efficient algorithms for the analysis of collaborative tagging

The rise of Web 2.0 is signaled by sites such as Flickr, del.icio.us, and YouTube, and social tagging is essential to their success. A typical tagging action involves three components, user, item (e.g., photos in Flickr), and tags (i.e., words or phrases). Analyzing how tags are assigned by certain users to certain items has important implications in helping users search for desired information. In this paper, we develop a dual mining framework to explore tagging behavior. This framework is centered around two opposing measures, similarity and diversity, applied to one or more tagging components, and therefore enables a wide range of analysis scenarios such as characterizing similar users tagging diverse items with similar tags or diverse users tagging similar items with diverse tags. By adopting different concrete measures for similarity and diversity in the framework, we show that a wide range of concrete analysis problems can be defined and they are NP-Complete in general. We design four sets of efficient algorithms for solving many of those problems and demonstrate, through comprehensive experiments over real data, that our algorithms significantly out-perform the exact brute-force approach without compromising analysis result quality.     

Design of artificial neuron controller for STATCOM in dSPACE environment

Reactive power compensation is an important issue in the control of electric power system. Reactive power from the source increases the transmission losses and reduces the power transmission capability of the transmission lines. Moreover, reactive power should not be transmitted through the transmission line to a longer distance. Hence Flexible AC Transmission Systems (FACTS) devices such as static compensator (STATCOM) unified power flow controller (UPFC) and static volt–ampere compensator (SVC) are used to alleviate these problems. In this paper, a voltage source converter (VSC) based STATCOM is developed with PI and Artificial Neural Network Controller (ANNC). The conventional PI controller has more tuning difficulties while the system parameter changes, whereas a trained neural network requires less computation time. The ANNC has the ability to generalize and can interpolate in between the training data. The ANNC designed was tested on a 75 V, ±3KVAR STATCOM in real time environment via state-of-the-art of digital signal processor advanced control engineering (dSPACE) DS1104 board and it was found that it was producing better results than the PI controller.     

Buoyancy convection in a cavity with mutually orthogonal heated plates

Buoyancy driven convection in a square cavity induced by two mutually orthogonal arbitrarily placed heated thin plates is studied numerically under isothermal and isoflux boundary conditions. The flow is assumed to be two-dimensional. The coupled governing equations were solved by the finite difference method using the Alternating Direction Implicit technique and Successive Over Relaxation method. The steady state results are depicted in terms of streamline and isotherm plots. It is found that the resulting convection pattern is stronger for the isothermal boundary condition. A better overall heat transfer can be achieved by placing one of the plates far away from the center of the cavity for isothermal boundary condition and near the center of the cavity for isoflux boundary condition.