Mechanism of the inhibiting effect of diphenylamine in the oxidation of hydraulic oils

The mechanism of the inhibiting effect of diphenylamine during the oxidation of two base stocks of hydraulic oils were studied at 120, 130, and 140°C. The key reactions in the mechanism of the action of the inhibitor were identified, and the values of the kinetic parameters and their activation energies were determined. The kinetic parameters were calculated, and the salient kinetic features of the inhibited oxidation of the two specimens were compared at 70°C, the temperature of accelerated testing of hydraulic oils. The results of this prediction were analyzed, and the reasons for differences in the oxidation stability of the samples examined were established.     

Formation and electronic structure of interface

In the present work the formation of the interface between polycrystalline silver and thin films of titanium oxide was studied with photoelectron spectroscopy (XPS, UPS) and time-of-flight secondary ion mass spectrometry (TOF-SIMS). Titanium oxide was deposited stepwise on 100 nm thick silver films by reactive magnetron sputtering allowing to study the evolution of the interface formation process. The process involves two steps: formation of thin layer of silver oxide and subsequent growth of the TiO₂ film. For better understanding of the silver oxidation process, pure silver films were exposed to a low temperature Ar/O plasma for different time intervals providing a possibility to investigate early stages of the oxide film growth.     

Automated Flaw Detection in Algebraic Specifications

In interactive theorem proving practice a significant amount of time is spent on unsuccessful proof attempts of wrong conjectures. An automatic method that reveals them by generating finite counter examples would offer an extremely valuable support for a proof engineer by saving his time and effort. In practice, such counter examples tend to be small, so usually there is no need to search for big instances. Most definitions of functions or predicates on infinite structures do not preserve the semantics if a transition to arbitrary finite substructures is made. We propose constraints which guarantee a correct axiomatization on finite structures and present an approach which uses the Alloy Analyzer to generate finite instances of theories in the theorem prover KIV. It is evaluated on the library of basic data types as well as on some challenging case studies in KIV. The technique is implemented using the Kodkod constraint solver which is a successor of Alloy.     

A semi-supervised tool for clustering accounting databases with applications to internal controls

A considerable body of literature attests to the significance of internal controls; however, little is known on how the clustering of accounting databases can function as an internal control procedure. To explore this issue further, this paper puts forward a semi-supervised tool that is based on self-organizing map and the IASB XBRL Taxonomy. The paper validates the proposed tool via a series of experiments on an accounting database provided by a shipping company. Empirical results suggest the tool can cluster accounting databases in homogeneous and well-separated clusters that can be interpreted within an accounting context. Further investigations reveal that the tool can compress a large number of similar transactions, and also provide information comparable to that of financial statements. The findings demonstrate that the tool can be applied to verify the processing of accounting transactions as well as to assess the accuracy of financial statements, and thus supplement internal controls.     

Corrosion-resistant analogue of Hadfield steel

The concept of alloying austenitic steels with carbon + nitrogen is used for the development of a corrosion-resistant austenitic CrMn steel having an impact wear resistance close to that of the Hadfield steel. A higher stabilization of the austenitic phase by C + N, as compared to carbon or nitrogen alone, is substantiated by ab initio calculation of the electron structure, measurements of the concentration of free electrons and calculations of the phase equilibrium. Based on these results, the compositions (mass%) Cr18Mn18C0.34N0.61 and Cr18Mn18C0.49N0.58 were melted and tested along with Hadfield steel Mn12C1.2. Mechanical tests have shown that, as compared to the Hadfield steel, the experimental steels possess a higher strength, plasticity, hardness and the same resistance to impact wear. TEM studies of the surface layer after impact treatment revealed a mixture of the amorphous phase, nanocrystals and fine-twinned austenite. At the same time, using Mössbauer spectroscopy of conversion electrons, the ferromagnetic ordering was found in the surface layer of up to 10 μm in depth, which is the sign of the strain-induced martensitic phase. The hypothesis of a transition from the low-spin to the high-spin state of the iron atoms within the thin twins in austenite was proposed in order to interpret the discrepancy between TEM and Mössbauer studies. Potentiodynamic measurements and immersion tests show that the CrMnCN steels possess a significantly higher pitting potential and resistance to general corrosion in comparison with Hadfield steel.     

Control of quality of gas-fractionating plant products at oao angarsk petrochemical company by selecting optimum control zones

The reasons for unsteady quality of the propane fraction produced have been found by investigation of the plant at the refinery of OAO Angarsk Petrochemical Company. The areas of the column that govern the quality of the distilled and bottom products have been detected by using the HYSYS PLANT software module.     

Multicomponent bulk metal nitride (Nb1/3Ta1/3Ti1/3)N1−δ synthesis via reaction flash sintering and characterizations

In this research, near fully dense single phase bulk multicomponent transition metal nitride (Nb_1/3Ta_1/3Ti_1/3)N_1−δ has been successfully synthesized from mixed commercial powders of NbN, TaN and TiN via reaction flash sintering technique. This was performed with an applied pressure of ~ 35 MPa at 25°C under a constant DC electric field (~24-32 V/cm). The flash event, which is the abrupt increase in current (up to ~ 25.2 A/mm²) and temperature, occurred without preheating. The threshold power dissipation on the sample right before the flash is ~ 0.7 W/mm³. The formation of single phase (Nb_1/3Ta_1/3Ti_1/3)N_1−δ random solid solution and its compositional uniformity were confirmed by XRD and EDS, respectively. The effects of ball milling duration and limiting current density on phase formation were studied. Simulation based on Joule heating provides an estimate of the ultimate sample temperature of ~ 1850°C. Vickers hardness of the obtained (Nb_1/3Ta_1/3Ti_1/3)N_1−δ is 17.6 ± 0.6 GPa, which is comparable to similarly flash sintered ingredient binary nitrides of TaN and NbN. TGA in air shows that the oxidation resistance of (Nb_1/3Ta_1/3Ti_1/3)N_1−δ is better than that of TaN and NbN but inferior to TiN. The study demonstrates that reaction flash sintering can be a highly efficient technique for synthesizing bulk multicomponent ceramics for both material fundamental investigations and application development.     

The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact

Laser surface texturing (LST) is an emerging effective method for improving the tribological performance of friction units lubricated with oil. In LST technology, a pulsating laser beam is used to create thousands of arranged microdimples on a surface by a material ablation process. These dimples generate hydrodynamic pressure between oil-lubricated parallel sliding surfaces. The impact of LST on lubricating-regime transitions was investigated in this study. Tribological experiments were conducted with a pin-on-disk apparatus at sliding speeds in the range of 0.015–0.75 m/s and nominal contact pressures that ranged from 0.16 to 1.6 MPa. Two oils with different viscosities (54.8 and 124.7 cSt at 40 °C) were used as lubricants. The test results showed that laser texturing expanded the contact parameters in terms of load and speed for hydrodynamic lubrication, as indicated by friction transitions on the Stribeck curve. The beneficial effects of laser surface texturing are more pronounced at higher speeds and loads and with higher viscosity oil.     

Photoelastic and acousto-optical properties of Cs2HgCl4 crystals

We use a Mach-Zehdner interferometric technique to study the piezo-optical properties of Cs2HgCl4 crystals at room temperature. All piezo-optical (pi(mn)) and photoelastic (p(in)) tensor constants are obtained. A substantial photoelastic effect and low ultrasonic velocities in these crystals determine a relatively high figure of merit M2 for isotropic diffraction (for a certain geometry of acousto-optical interactions, M2 approximately 110 x 10(-15) s3/kg). The new material may be considered, therefore, a candidate for applications in acousto-optical devices. The dependence of the acoustic walk-off angle on the direction of sound propagation is calculated for the principal crystallographic planes.     

Photostable liquid‐crystal guest‐host nano‐materials for display applications

Abstract— We theoretically modeled the optical plasmon absorption of anisotropic metallic nanoparticles in a liquid‐crystal host medium. Metallic nanorods and spheroids act as pleochroic dopants with virtually unlimited photostability. Calculations predict that full‐color displays based on nanorod orientation driven by the transition from homogeneous to homeotropic LC alignment are feasible. These displays are expected to have large viewing angles without the need for polarizers or LC anchoring surfaces.