A generalized gamma distribution with application to drought data

Gamma distributions are some of the most popular models for hydrological processes. In this paper, a very flexible family which contains the gamma distribution as a particular case is introduced. Evidence of flexibility is shown by examining the shape of its probability density function (pdf). A treatment of the mathematical properties is provided by deriving expressions for the n th moment. Estimation and simulation issues are also considered. Finally, a detailed application to drought data from the State of Nebraska is illustrated.     

Conducting composites of poly(N‐vinylcarbazole), polypyrrole,and polyaniline with 13X‐zeolite

N‐vinylcarbazole (NVC) was polymerized by 13X zeolite alone in melt (65°C) or in toluene (110°C) and a poly(N‐vinylcarbazole) (PNVC)‐13X composite was isolated. Composites of polypyrrole (PPY) and polyaniline(PANI) with 13X zeolite were prepared via polymerization of the respective monomers in the presence of dispersion of 13X zeolite in water (CuCl₂ oxidant) and in CHCl₃ (FeCl₃ oxidant) at an ambient temperature. The composites were characterized by Fourier transform infrared analyses. Scanning electron microscopic analyses of various composites indicated the formation of lumpy aggregates of irregular sizes distinct from the morphology of unmodified 13X zeolite. X‐ray diffraction analysis revealed some typical differences between the various composites, depending upon the nature of the polymer incorporated. Thermogravimetric analyses revealed the stability order as: 13X‐zeolite > polymer‐13X‐zeolite > polymer. PNVC‐13X composite was essentially a nonconductor, while PPY‐13X and PANI‐13X composites showed direct current conductivity in the order of 10^?4 S/cm in either system. However, the conductivity of PNVC‐ 13X composite could be improved to 10^?5 and 10^?6 S/cm by loading PPY and PANI, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 913–921, 2006     

A Novel DUF569 Gene Is a Positive Regulator of the Drought Stress Response in Arabidopsis

In the last two decades, global environmental change has increased abiotic stress on plants and severely affected crops. For example, drought stress is a serious abiotic stress that rapidly and substantially alters the morphological, physiological, and molecular responses of plants. In Arabidopsis, several drought-responsive genes have been identified; however, the underlying molecular mechanism of drought tolerance in plants remains largely unclear. Here, we report that the “domain of unknown function” novel gene DUF569 (AT1G69890) positively regulates drought stress in Arabidopsis. The Arabidopsis loss-of-function mutant atduf569 showed significant sensitivity to drought stress, i.e., severe wilting at the rosette-leaf stage after water was withheld for 3 days. Importantly, the mutant plant did not recover after rewatering, unlike wild-type (WT) plants. In addition, atduf569 plants showed significantly lower abscisic acid accumulation under optimal and drought-stress conditions, as well as significantly higher electrolyte leakage when compared with WT Col-0 plants. Spectrophotometric analyses also indicated a significantly lower accumulation of polyphenols, flavonoids, carotenoids, and chlorophylls in atduf569 mutant plants. Overall, our results suggest that novel DUF569 is a positive regulator of the response to drought in Arabidopsis.     

Enhanced α-Mn2O3 nanorods synthesized by one-pot hydrothermal route for supercapacitors

Journal of Materials Science: Materials in Electronics - Pseudo-capacitors are the emerging energy storage devices which forms a bridge between batteries and conventional capacitors. In the present...     

Mechanical characterization of a bituminous mix under quasi-static and high-strain rate loading

There are various methods to determine the compressive and tensile strength of asphalt concrete under static loading conditions and most studies on asphalt strength and fracture have been conducted under such loading conditions. However, pavement materials also have to withstand a wide variety of loading and temperature conditions which may vary from quasi-static to high-strain rate impact, and pavement breakdown may occur due to fracture and/or fatigue failure. In the present study, a bituminous mix with 30% RAP has been characterized under quasi-static (10^?3–10^?4 strain/s) and high-strain rate (200–700 strain/s) regimes. The experimental studies have been performed to better understand the compressive, tensile and fracture response of bituminous mixes. Split Hopkinson pressure bar (SHPB) and its modifications were used for high-strain rate characterization of this bituminous mixture. It was observed that the mechanical properties of the hot mix asphalt (HMA) changed significantly under high-strain rate testing. Also, the failure mechanisms observed under the high-strain rate loading were found to be considerably different from those obtained in static testing, where failure of binder was a predominant mechanism. It was observed that high-strain rate loading caused trans-aggregate failures in the specimens; in addition to failure of the binder.     

Electron microscopy of shock deformation in alumina

Shock recovered samples of a coarse grain (10 μm), high density (>99.9% theoretical) alumina from asymmetric impact tests conducted at 6.5 GPa (e.g. 3.2 times its Hugoniot Elastic Limit) in a single stage gas gun and characterized by X-ray diffractometry, scanning and field emission scanning electron microscopy, and transmission electron microscopy showed prolific presence of reduced crystallite size, higher average microstrain, grain localized micro/nano-scale deformations, micro-cleavages, grain-boundary microcracks, micro-wing crack formation, extensive shear induced deformations and fractures localized at grains, grain boundaries and triple grain junctions, grain localized entanglement of dislocations and their pile up impeded at grain boundaries. A new qualitative model based on micro-shear and micro-twist induced deformation and fracture in single and/or multiple planes in suitably oriented grain and/or grain assembly was developed to explain the experimentally observed damage evolution process.     

Extraction of iridium(III) by ion-pair formation with 2-octylaminopyridine in weak organic acid media

To extract iridium(III), various physicochemical parameters were studied. 2-Octylaminopyridine was used for the extraction of iridium(III) from acetate medium at 8.5 pH. Quantitative extraction of iridium(III) was achieved via ion-pair formation of cation [2-OAPH⁺] and anion [Ir(CH₃COO)₄]^?. The stripping of iridium(III)-laden organic phase was carried out 2 M HCl (3 × 10 mL) . The stoichiometry of the extracted ion–pair complex was found to be 1:4:1 (metal: acetate: extractant). The extracted species [2-OAPH⁺. Ir(CH₃COO)₄^?] is assumed to be an ion association product of [Ir(CH₃COO)₄] ^? and [2-OAPH]⁺. The proposed method was successfully used in the separation of iridium(III) from binary and ternary mixtures. Analysis of various alloy samples was also carried out.     

New observations in micro-pop-in issues in nanoindentation of coarse grain alumina

The present experiments were focused on nanoindentation behaviour and the attendant “micro-pop-in” in a dense (～95% of theoretical) coarse-grain (～20 μm) alumina ceramic as a function of loading rate variations at three constant peak loads in the range of 10⁵–10⁶ μN. Based on the experimental results here we report for the first time, to the best of our knowledge, an increase in intrinsic nano scale contact resistance as well as the nanohardness with the loading rate. These observations were explained in terms of the correlation between the nanoscale plasticity and shear stress active just underneath the nanoindenter.     

Loading Rate Effect on Nanohardness of Soda-Lime-Silica Glass

To understand how hardness, the key design parameter for applications of brittle solids such as glass concerning contact deformation, is affected by loading rate variation, nanoindentation with a Berkovich tip was used to measure the nanohardness of a 330-μm-thick soda-lime-silica glass as a function of loading rate (1 to 1000 mN·s⁻¹). The results showed for the very first time that, with variations in the loading rate, there was a 6 to 9 pct increase in the nanohardness of glass up to a threshold loading rate (TLR), whereafter it did not appreciably increase with further increase in loading rate. Further, the nanohardness data showed an indentation size effect (ISE) that obeyed the Meyer’s law. These observations were explained in terms of a strong shear stress component developed just beneath the nanoindenter and the related shear-induced deformation processes at local microstructural scale weak links. The significant or insignificant presence of shear-induced serrations in load depth plots and corresponding scanning electron microscopic evidence of a strong or mild presence of shear deformation bands in and around the nanoindentation cavity supported such a rationalization. Finally, a qualitative picture was developed for different deformation processes induced at various loading rates in glass.