Progressive NO2 Sensors with Rapid Alarm and Persistent Memory-Type Responses for Wide-Range Sensing Using Antimony Triselenide Nanoflakes

Antimony triselenide (Sb₂Se₃) nanoflake-based nitrogen dioxide (NO₂) sensors exhibit a progressive bifunctional gas-sensing performance, with a rapid alarm for hazardous highly concentrated gases, and an advanced memory-type function for low-concentration (<1 ppm) monitoring repeated under potentially fatal exposure. Rectangular and cuboid shaped Sb₂Se₃ nanoflakes, comprising van der Waals planes with large surface areas and covalent bond planes with small areas, can rapidly detect a wide range of NO₂ gas concentrations from 0.1 to 100 ppm. These Sb₂Se₃ nanoflakes are found to be suitable for physisorption-based gas sensing owing to their anisotropic quasi-2D crystal structure with extremely enlarged van der Waals planes, where they are humidity-insensitive and consequently exhibit an extremely stable baseline current. The Sb₂Se₃ nanoflake sensor exhibits a room-temperature/low-voltage operation, which is noticeable owing to its low energy consumption and rapid response even under a NO₂ gas flow of only 1 ppm. As a result, the Sb₂Se₃ nanoflake sensor is suitable for the development of a rapid alarm system. Furthermore, the persistent gas-sensing conductivity of the sensor with a slow decaying current can enable the development of a progressive memory-type sensor that retains the previous signal under irregular gas injection at low concentrations.     

National survey of mammographic facilities in 1985, 1988, and 1992

PURPOSE: To determine trends in mammography in the United States. MATERIALS AND METHODS: A sample of mammographic facilities was selected for each year of the Nationwide Evaluation of X-ray Trends. The same protocol was followed for the 1985, 1988, and 1992 surveys. Data were collected with use of the same imaging phantom for all three surveys and also with a different phantom in the 1988 and 1992 surveys. RESULTS: Of the 356 facilities surveyed in 1992, 59% claimed to be in compliance with the Health Care Financing Administration (HCFA) mammography requirements, 42% were accredited by the American College of Radiology (ACR), and 23% did not hold credentials from either the HCFA or the ACR. Since 1985, there has been a 34% improvement in acceptable phantom image quality score and a 20% decrease in the mean glandular dose. CONCLUSION: Mammography as practiced today is essentially a screen-film technique. Mammographic phantom image quality has improved considerably. The overall mean glandular dose has decreased primarily because of the elimination of xeroradiography.     

The organization and animal-vegetal asymmetry of cytokeratin filaments in stage VI Xenopus oocytes is dependent upon F-actin and microtubules

Confocal immunofluorescence microscopy with anti-cytokeratin antibodies revealed a continuous and polarized network of cytokeratin (CK) filaments in the cortex of stage VI Xenopus oocytes. In the animal cortex, CK filaments formed a dense meshwork that both was thicker and exhibited a finer mesh than the network of CK filaments previously observed in the vegetal cortex (Klymkowsky et al., 1987). CK filaments first appeared in association with germinal vesicle (GV) and mitochondrial mass (MM) of oocytes in early mid stage I, indicating that CK filaments are the last of the three cytoskeletal networks to be assembled. By late stage I, CK filaments formed complex networks surrounding the GV, surrounding and penetrating the MM, and linking these networks to a meshwork of CK filaments in the oocyte cortex. During stage III-early IV, CK filaments formed a highly interconnected, apparently unpolarized, radial array linking the perinuclear and cortical CK filament networks. Polarization of the CK filament network was observed during mid stage IV-stage V, as first the animal, then the vegetal CK filament networks adopted the organization characteristic of stage VI oocytes. Treatment of stage VI oocytes with cytochalasin B disrupted the organization of both cortical and cytoplasmic CK filaments, releasing CK filaments from the oocyte cortex and inducing formation of numerous cytoplasmic CK filament aggregates. CB also disrupted the organization of cytoplasmic microtubules (MTs) in stage VI oocytes. Disassembly of oocyte MTs with nocodazole resulted in loss of the characteristic A-V polarity of the cortical CK filament network. In contrast, disruption of cytoplasmic CK filaments by microinjection of anti-CK antibodies had no apparent effect on cytoplasmic or MT organization. We propose a model in which the organization and polarization of the cortical network of CK filaments in stage VI Xenopus oocytes are dependent upon a hierarchy of interactions with actin filaments and microtubules.     

Secobarbital in humans discriminating triazolam under two-response and novel-response procedures

The percentage of long-term survivors after intensive chemotherapy and the outcome of MDS patients who achieve partial remission (PR) with intensive chemotherapy (IC) are not known. Between 1981 and 1996 we treated 99 patients with de novo MDS who had high-risk MDS or progression to AML, with IC. 41 (41%) achieved CR, 16 (16%) achieved partial remission (PR), 26 (26%) had failure, and 16 (16%) died in aplasia. Eight of the patients who achieved CR were autografted, three were allografted and the remaining cases received moderate consolidation chemotherapy. After IC, the 16 PR patients fulfilled the criteria for RA in 15 cases and CMML in one case. Median PR duration was 17 months, and three PR were > 3 years (39, 50+, 82+ months). Median actuarial survival of patients who achieved PR and CR was 18 months and 20 months from the onset of IC, respectively (difference not significant). Of the 71 patients treated before 1993, with sufficient follow-up, 10 (14%) had survived > 4 years (long-term survivors). Four of them were alive in first CR after 49+ to 110+ months and probably cured, two were alive in PR after 50+ and 82+ months and four had died after 49-78 months. Long-term survivors were characterized by a significantly higher incidence of RAEB-T at diagnosis, and with normal or favourable cytogenetic findings. In patients with RAEB-T at diagnosis included before 1993, 8/23 (35%) cases who had no unfavourable karyotype had survived > 4 years. Our findings suggest that MDS patients who achieve PR with IC, and not only those who achieve CR, can benefit from this type of treatment. The percentage of long-term survivors remains low, however, and is almost restricted to patients with RAEB-T at diagnosis and no unfavourable karyotype.     

Flexible, dry-released process for aluminum electrostatic actuators

We present an all-aluminum MEMS process (Al-MEMS) for the fabrication of large-gap electrostatic actuators with process steps that are compatible with the future use of underlying, pre-fabricated CMOS control circuitry. The process is purely additive above the substrate as opposed to processes that depend on etching pits into the silicon, and thereby permits a high degree of design freedom. Multilayer aluminum metallization is used with organic sacrificial layers to build up the actuator structures. Oxygen-based dry etching is used to remove the sacrificial layers. While this approach has been previously used by other investigators to fabricate optical modulators and displays, the specific process presented herein has been optimized for driving mechanical actuators with relatively large travels. The process is also intended to provide flexibility for design and future enhancements. For example, the gap height between the actuator and the underlying electrode(s) can be set using an adjustable polyimide sacrificial layer and aluminum “post” deposition step. Several Al-MEMS electrostatic structures designed for use as mechanical actuators are presented as well as some measured actuation characteristics     

Slow eroding biodegradable multiblock poloxamer copolymers

Biodegradable multiblock poloxamers (BMPs) with gel duration of 8 h to several weeks were prepared by varying their molecular weights from 4000 to 40 000 g mol^?1. The molecular weight of the BMP was controlled by changing the poloxamer to coupling agent ratio. Assuming a micelle packing model of the BMP gel, as in the case of a poloxamer gel, the micelle properties and critical gel concentration of BMPs were investigated on the basis of the scaling concept. The findings suggest that the control of molecular weight by hydrolyzable groups can be a facile approach to optimize the gel properties for biomedical applications. Copyright © 2005 Society of Chemical Industry     

Design of software systems based on axiomatic design

The ability to utilize fully automated flexible manufacturing systems (FMS) or develop reliable computer-integrated manufacturing (CIM) systems will depend on our ability to develop reliable and reusable software for large complex systems on a timely basis. To date, software design has not gone very far beyond the ad hoc trial-and-error stage. Consequently, the development of software is slow, expensive, unreliable, and unmanageable. The purpose of this paper is to provide a scientific basis for designing software. The approach used here is that of axiomatic design, which is based on two design axioms: the Independence Axiom and the Information Axiom. The axiomatic approach is based on the recognition of the following common elements in design: the existence of independent domains (i.e. the consumer domain, the functional domain, the physical domain, and the process domain); the need to map between various domains during the design process; the decomposition of the characteristic vectors (i.e. functional requirements, design parameters, and process variables) in their respective domains; the zig-zagging required between the domains for decomposition; and the need to satisfy the design axioms during the design process. The axiomatic approach discussed in this paper provides decision making tools for software design in addition to systematic means of knowledge and data representation, synthesis and analysis of software, and the construction of the module-junction structure diagram.     

ERCP and CT findings of ectopic drainage of the common bile duct into the duodenal bulb

OBJECTIVE: The purpose of this study was to evaluate ERCP and CT findings of ectopic drainage of the common bile duct into the duodenal bulb. CONCLUSION: Although rare, the diagnosis of ectopic drainage of the common bile duct into the duodenal bulb is important to prevent inadvertent damage during biliary tract or gastric surgery and to clarify the cause of chronic peptic ulcers.