Microstructure of Silicon Carbide Whiskers Synthesized by Carbothermal Reduction of Silicon Nitride

The microstructure of silicon carbide whiskers synthesized by carbothermal reduction of silicon nitride has been studied using transmission electron microscopy. All of the whiskers examined are single crystals, and grow in the (111) crystallographic direction. Two different forms of stacking faults and microtwins were observed; in one the planar defects are normal to the whisker growth direction, and the other has the defect planes at an angle of about 70° to the growth axis, while both forms of the defects are on the [111] closed-packed planes. Without the addition of catalyst, droplets containing metallic impurities were not found at the tips of the whiskers synthesized by the present process. A core and outer regions were observed in the single-crystal whiskers, which may be evidence that the whiskers were formed by a two-stage mechanism.     

MMP1 and MMP11 Expression in Peripheral Blood Mononuclear Cells upon Their Interaction with Breast Cancer Cells and Fibroblasts

Tumor-infiltrating immune cells phenotype is associated with tumor progression. However, little is known about the phenotype of the peripheral blood mononuclear cells (PBMC) from breast cancer patients. We investigated MMP1 and MMP11 expression in PBMC from breast cancer patients and we analyzed gene expression changes upon their interaction with cancer cells and cancer-associated fibroblasts (CAF). We measured the impact of PBMC on proinflammatory gene expression in breast cancer cells, normal fibroblast (NF), and CAF and the impact on proliferation and invasiveness capacity of breast cancer cells. Gene expression of MMP1 and MMP11 in PBMC from breast cancer patients (n = 54) and control (n = 28); expression of IL1A, IL6, IL17, IFNβ, and NFĸB in breast cancer cell lines (MCF-7 and MDA-MB-231); and, additionally, IL10 and MMP11 in CAF and NF were analyzed by qRT-PCR before and after co-culture. Our results show the existence of a subpopulation of breast cancer patients (25.9%) with very high levels of MMP11 gene expression in PBMC. Also, gene expression of MMP1 and MMP11 increases in PBMC after co-culture with breast cancer cell lines, NF or CAF. PBMC from healthy or breast cancer patients induce an increased proliferation rate on MCF-7 and an increased invasiveness capacity of MDA-MB-231. Finally, we show a differential expression profile of inflammatory genes in NF and CAF when co-cultured with control or breast cancer PBMC. We have observed that MMPs’ expression in PBMC is regulated by the microenvironment, while the expression of inflammatory genes in NF or CAF is differentially regulated by PBMC. These findings confirm the importance of the crosstalk between stromal cells and suggest that PBMC would play a role in promoting aggressive tumor behavior.     

Rheological properties of hyperbranched polymer/poly(ethylene terephthalate) reactive blends

The rheological properties in solution, in shear and in uniaxial elongation of poly(ethylene terephthalate) (PET) reacted together with hyperbranched polymers (HBPs) were investigated. Two different PET grades, of low and high molecular weights, were compounded with sub‐ to over‐stoichiometric concentrations of HBPs of second and fourth pseudo‐generation, and subsequently subjected to a solid‐state polycondensation (SSP). The formation of microgels, which occurs at high HBP concentration, gave rise to a large increase in melt elasticity and a related decrease in melt strength. At low HBP concentrations, the complex viscosity of the unreacted HBP/PET was considerably reduced, thus demonstrating a lubrication effect of the HBP molecules. During SSP, the intrinsic and shear viscosities exhibited a gradual increase, which was similar for both PET and HBP/PET blends, and was correlated to an increase in molecular weight, through linear‐chain extension and branching reactions. The elongational viscosity of the reactive blends was also increased as a function of reaction time, and this increase was much larger in the case of the HBP/PET blends. A 400% increase in melt strength of the PET was obtained by combining SSP and trace amounts of an HBP of second generation, without any decrease in drawability.     

Effect of matrix liquid phase on interphase formation in SiC fibre-reinforced Si2N2O-Al2O3-CaO composites

Matrix compositions based on Si₂N₂O, with Al₂O₃ and CaO additions, were used to hot press Nicalon SiC fibre-reinforced composites at 1600 °C. With both CaO and Al₂O₃ additions, eutectic melting formed an appreciable volume of liquid phase during hot pressing, which remained as a stable glassy phase in the cooled composites. This liquid phase fostered formation of 240 nm thick carbon-rich interphases between the fibres and the matrix. These interphases showed relatively low interfacial shear strength and resulted in composites which showed non-catastrophic, notch-independent fracture. Matrices using either Al₂O₃ or CaO did not form adequate liquid phase to form coarse interphases, and fracture was catastrophic in nature. Post-heat treatment of the composites at 1000 °C showed peripheral oxidation (removal of the carbon content of the interphase) indicating limited protection afforded when glassy phase was present in the matrix. Controlled cooling in the hot press did not cause the liquid regions to devitrify.     

Prediction of indications for valve replacement among asymptomatic or minimally symptomatic patients with chronic aortic regurgitation and normal left ventricular performance

BACKGROUND: Optimal criteria for valve replacement are unclear in asymptomatic/minimally symptomatic patients with aortic regurgitation (AR) and normal left ventricular (LV) performance at rest. Moreover, previous studies have not assessed the prognostic capacity of load-adjusted LV performance ("contractility") variables, which may be fundamentally related to clinical state. Therefore, 18 years ago, we set out to test prospectively the hypothesis that objective noninvasive measures of LV size and performance and, specifically, of load-adjusted variables, assessed at rest and during exercise (ex), could predict the development of currently accepted indications for operation for AR. METHODS AND RESULTS: Clinical variables and measures of LV size, performance, and end-systolic wall stress (ESS) were assessed annually in 104 patients by radionuclide cineangiography at rest and maximal ex and by echocardiography at rest; ESS was derived during ex. During an average 7.3-year follow-up among patients who had not been operated on, 39 of 104 patients either died suddenly (n = 4) or developed operable symptoms only (n = 22) or subnormal LV performance with or without symptoms (n = 13) (progression rate=6.2%/y). By multivariate Cox model analysis, change (delta) in LV ejection fraction (EF) from rest to ex, normalized for deltaESS from rest to ex (deltaLVEF-deltaESS index), was the strongest predictor of progression to any end point or to sudden cardiac death alone. Unadjusted deltaLVEF was almost as efficient. Symptom status modified prediction on the basis of the deltaLVEF-deltaESS index. The population tercile at highest risk by deltaLVEF-deltaESS progressed to end points at a rate of 13.3%/y, and the lowest-risk tercile progressed at 1.8%/y. CONCLUSIONS: Currently accepted symptom and LV performance indications for valve replacement, as well as sudden cardiac death, can be predicted in asymptomatic/minimally symptomatic patients with AR by load-adjusted deltaLVEF-deltaESS index, which includes data obtained during exercise.     

Venom Peptide Toxins Targeting the Outer Pore Region of Transient Receptor Potential Vanilloid 1 in Pain: Implications for Analgesic Drug Development

The transient receptor potential vanilloid 1 (TRPV1) ion channel plays an important role in the peripheral nociceptive pathway. TRPV1 is a polymodal receptor that can be activated by multiple types of ligands and painful stimuli, such as noxious heat and protons, and contributes to various acute and chronic pain conditions. Therefore, TRPV1 is emerging as a novel therapeutic target for the treatment of various pain conditions. Notably, various peptides isolated from venomous animals potently and selectively control the activation and inhibition of TRPV1 by binding to its outer pore region. This review will focus on the mechanisms by which venom-derived peptides interact with this portion of TRPV1 to control receptor functions and how these mechanisms can drive the development of new types of analgesics.     

Star-shaped hexaaryltriindoles small molecules: Tuning molecular properties towards solution processed organic light emitting devices

We present a series of differently substituted star-shaped hexaaryltriindoles with tunable light-emitting properties. The deep blue emission is unchanged by donor peripheral substituents while an increasing acceptor character produces a reduction of the optical gap, an increased Stokes shift and eventually leads to the appearance of a new electronic level and to the simultaneous deep blue (413 nm) and green (552 nm) emission in solution. Quenching by concentration increases with the acceptor character but is lower as the tendency of these compounds to aggregate is stronger. Solution processed thin films present optical and morphological qualities adequate for device fabrication and similar electronic structure compared to solutions with an emission range from 423 nm up to 657 nm (red), demonstrating the possibility of tuning the energy levels by chemical functionalization. We have fabricated and characterized single-layer solution processed organic light emitting diodes (OLED) to investigate the influence on transport and emission properties of the substituting species. We analyzed the I–V response using a single-carrier numerical model that includes injection barriers and non-uniform electric-field across the layer. As a result, we obtained the electric field dependence of the mobility for each device. Best results are obtained on the most electron rich derivative functionalized with six donor methoxy groups. This material shows the highest emission efficiency in solid state, due to aggregation-induced enhancement, and better transport properties with the highest mobility and a very low turn-on voltage of 2.8 V. The solution processed OLED devices produce stable deep blue (CIE coordinates (0.16, 0.16)) to white (CIE coordinates (0.33, 0.3)) emission with similar luminous efficiencies.     

Effect of cooking on total vitamin C contents and antioxidant activity of sweet chestnuts (Castanea sativa Mill.)

In this work the total vitamin C contents (ascorbic acid + dehydroascorbic acid) and antioxidant activity of raw and cooked chestnuts was evaluated. The vitamin C contents of raw chestnuts varied significantly between the different cultivars (cv) studied and it varied from 400 mg/kg dry weight (cv Lada) to 693 mg/kg dry weight (cv Martaínha). The different cultivars behave differently during the cooking process concerning the loss of vitamin C. A significant decrease in the vitamin C content of the chestnuts was observed, 25–54% for the boiling process and 2–77% for the roasting process. Boiled and roasted chestnuts can be good sources of vitamin C since it may represent 22.4%, 16.2%, 26.8% and 19.4%, respectively, of the recommended dietary intake for an adult man and woman. The cooking process significantly changed the antioxidant activity of the chestnuts. A difference was observed between the cultivars during the cooking processes, concerning the antioxidant activity. For the raw chestnuts the variation in vitamin C content of the chestnuts explains 99% of the antioxidant activity variation but for the roasted and boiled chestnuts this percentage significantly decreases to 51% and 88%, respectively. Although a high antioxidant activity is still present in the cooked chestnuts, the cause for this antioxidant activity is less dependent on the vitamin C content of the chestnuts, probably due to the conversion of ascorbic acid to dehydroascorbic acid. The increase in gallic acid during the cooking process, presumably transferred from the peels to the fruit, also contributes to the high antioxidant activity observed for the cooked chestnuts.     

Modelling of fluid properties in hydraulic positive displacement machines

This paper presents a numerical model for the simulation of a swash-plate axial piston pump, focusing on the characterization of fluid properties.As it is well known, the reduction of flow oscillations (which generates pressure ripples and produces vibration and noise in the entire circuit) and the avoidance of cavitation are the major problems in the design of these pumps. Developing a simulation code can be very useful for component optimisation in order to predict and reduce the undesired phenomena. The paper first gives a quick overview on a previously developed pump model; afterwards four different models of the fluid are presented: they take into account cavitation in different ways. Their aim at characterizing as well as possible the unsteady and erratic cavitation features in a simplified manner, in order to apply the models to the simulation of hydraulic components.In the second part of the paper an application is shown of these models to an axial piston pump: a few results are presented and compared with available test data. The effects of the fluid models on the predicted pump performance are shown and commented.     

Energy of Activation and Water Structure

Instances of temperature-dependent apparent energies of activation E_A, observed for hydrolysis reactions, are briefly reviewed, as are recent calculations according to which the presence of a reactant in two forms which are in mobile equilibrium may lead to a temperature-dependent E_A. These calculations are extended to a consideration of the temperature-dependence of the specific heat of activation, and to the possibility of more than two forms being in equilibrium. It is shown in some detail how the equilibrium between broken and intact hydrogen bonds in water may be responsible for observed effects.