Design of a wideband microstrip antenna and the use of artificial neural networks in parameter calculation

This paper deals with the design of a multi-slot hole-coupled microstrip antenna on a substrate of 2 mm thickness that gives multi-frequency (wideband) characteristics. The Method of Moments (MoM)-based IE3D software was used to simulate the results for return loss, VSWR, the Smith chart, and the radiation patterns. A tunnel-based artificial neural network (ANN) was also developed to calculate the radiation patterns of the antenna. The radiation patterns were measured experimentally at 10.5 GHz and 12 GHz. The experimental results were in good agreement with the simulated results from IE3D and those of the artificial neural network. A new method of using a genetic algorithm (GA) in an artificial neural network is also discussed. This new method was used to calculate the resonant frequency of a single-shorting-post microstrip antenna. The resonant frequency calculated using the genetic-algorithm-coupled artificial neural network was compared with the analytical and experimental results. The results obtained were in very good agreement with the experimental results.     

Synthesis of ductile titanium-titanium boride (Ti-TiB) composites with a beta-titanium matrix: The nature of TiB formation and composite properties

The study focused on the in-situ synthesis of titanium (Ti)-titanium boride (TiB) composites with β phase in the matrix by reaction sintering of TiB₂ with Ti and alloying element powders. The goal was to examine the nature of TiB whisker formation in three different kinds of powder mixtures: (1) β-Ti alloy powders and TiB₂; (2) α-Ti powder, a master alloy (Fe-Mo) powder containing the β-stabilizing elements, and TiB₂; and (3) α-Ti powder, a β-stabilizing elemental powder (Mo or Nb), and TiB₂. The effects of powder packing and the relative locations of powder particles on the morphological changes in TiB whisker formation and their growth were studied at processing temperatures ranging from 1100°C to 1300°C. The morphology, size, and distribution of whiskers were found to be influenced by the powder-packing conditions. A large particle-size ratio in bimodally packed mixtures led to the formation of a TiB monolithic layer around β grains. With a relatively finer starting powder, smaller size ratio, and trimodal packing arrangement, the TiB whiskers were found to be distributed more homogeneously in the matrix. The study also used the X-ray direct comparison method and the structure factor for the β phase to determine the volume fraction of TiB phase from X-ray data. Tensile tests and fractographic investigations were carried out on selected composites. The evolution of the composite microstructure, the influence of powder-packing variables, and the morphology and growth of TiB whiskers and their effect on mechanical properties are discussed.     

A novel sine augmented scaled sine cosine algorithm for frequency control issues of a hybrid distributed two-area power system

Neural Computing and Applications - In this research article, a novel approach is proposed by considering the sine augmented scaled sine cosine (SAS-SCA) Algorithm for the load frequency control of...     

Simulation Study of Dielectric Modulated Dual Material Gate TFET Based Biosensor by Considering Ambipolar Conduction

Silicon - In this paper, a dielectric modulated dual material gate TFET (DM-DMG_TFET)based biosensor is proposed. In order to detect various biomolecules, a nanogap cavity is formed by the...     

The design,analysis, and cost estimation of a generic adder and subtractor using the layered T (LT) logic reduction methodology with a quantum-dot cellular-automata-based approach

The quantum-dot cellular automata (QCA) is considered to be one of the ground-breaking nanotechnologies developed over the last two decades. A layered T (LT) logic cell library is constructed herein, and the methodology is extended to generic adder and subtractor module designs. The two proposed algorithms lead to more efficient QCA layout designs for an n-bit ripple carry adder (RCA) and subtractor based on an effective clock zone assignment approach. The suggested one-, four-, and eight-bit RCAs and subtractors surpass most of their existing counterparts by offering lower effective area and cell complexity. A comparative analysis is presented regarding the complexity, irreversible power dissipation, and Cost_α of the proposed n-bit layouts from a cost estimation purview.

     

Polymers from renewable resources. I. Castor oil-based interpenetrating polymer networks: Thermal and mechanical properties

A number of polyurethanes (PUs) were synthesized by reacting castor oil with toluene-2,4-diisocyanate and hexamethylene diisocyanate and varying the NCO/OH ratio. All these polyurethanes were reacted with some acrylic monomers like ethyl acrylate, n-butyl acrylate, ethyl methacrylate, and butyl methacrylate using a crosslinker ethylene glycol dimethyl-acrylate and benzoyl peroxide as the initiator. The physicochemical properties of interpenetrating polymer networks (IPNs) are reported. Thermogravimetric analysis was used to study the thermal behavior of IPNs and the evaluation of kinetic parameters. Degradation mechanism has also been investigated. Some of the mechanical properties viz. tensile strength, shore-A hardness, elongation at break, etc. are also reported. © 1993 John Wiley & Sons, Inc.     

Viscosity of Porous Glasses

Viscosity of porous glasses has been derived from the elastic stress analysis, using the viscous analogy. Viscosity as a function of porosity has been estimated for spherical as well as for arbitrary pore geometry. Since the pore geometry changes during sintering, a shape factor that varies with pore geometry has been considered to predict the viscosity–porosity relationship. Viscosity as a function of porosity was measured on cordierite-type glass by isothermal sinter-forging experiments and data showed good agreement with the analysis. Experimental data from literature on viscosity as a function of porosity on two other glasses also show good agreement with the analysis.     

Fuzzy logic techniques for navigation of several mobile robots

In this paper, navigation techniques for several mobile robots as many as one thousand robots using fuzzy logic are investigated in a totally unknown environment. Fuzzy logic controllers (FLC) using different membership functions are developed and used to navigate mobile robots. First a fuzzy controller has been used with four types of input members, two types of output members and three parameters each. Next two types of fuzzy controllers have been developed having same input members and output members with five parameters each. Each robot has an array of ultrasonic sensors for measuring the distances of obstacles around it and an infrared sensor for detecting the bearing of the target. These techniques have been demonstrated in various exercises, which depicts that the robots are able to avoid obstacles as well as negotiate the dead ends and reach the targets efficiently. Amongst the techniques developed, FLC having Gaussian membership function is found to be most efficient for mobile robots navigation.     

An Authentication Based Approach for Prevention of Spectrum Sensing Data Falsification Attacks in Cognitive Radio Network

Wireless Personal Communications - This is the era of Intelligent Cognitive Radio Network (CRN) technology that provides the available spectrum with efficient utilization. Cognitive Radio (CR)...     

Design and analysis of SSSC-based supplementary damping controller

Power-system stability improvement by a static synchronous series compensator (SSSC)-based damping controller is thoroughly investigated in this paper. The design problem of the proposed controller is formulated as an optimization problem, and real coded genetic algorithm (RCGA) is employed to search for the optimal controller parameters. Both local and remote signals with associated time delays are considered in the present study and a comparison has been made between the two signals. The performances of the proposed controllers are evaluated under different disturbances for both single-machine infinite-bus power system and multi-machine power system. Simulation results are presented and compared with a recently published modern heuristic optimization technique under various disturbances to show the effectiveness and robustness of the proposed approach.