Two cell-wall-associated aminopeptidases from Lactobacillus helveticus and the purification and characterization of APII from strain ITGL1

Lactobacillus helveticus ITGL1 is able to hydrolyse many amino-acyl and dipeptidyl-p-nitroanilides. Analysis of heat inactivation kinetics, metal ion and protease inhibitor effects, and the subcellular location of aminopeptidase activities in both the parental strain and mutants deficient in lysyl-p-nitroanilide hydrolysis, led to the characterization of two cell-wall-associated aminopeptidases, APII and APIV. APII, which catalysed L-lysine p-nitroanilide hydrolysis, was purified about 28-fold to homogeneity from cell-wall extracts of L. helveticus ITGL1 and characterized. The purified enzyme appeared to be monomeric, with a molecular mass of 97 kDa. Aminopeptidase activity was greatest at pH 6.5 and 50 degrees C. APII was completely inhibited by bestatin, chelating agents such as EDTA or 1,10-phenanthroline and the divalent cations Zn2+ and Cu2+. The activity of the EDTA-treated enzyme was restored by Co2+, Ca2+ or Mn2+. Although APII was able to degrade several dipeptides and tripeptides with hydrophobic N-terminal amino acid (Leu, Ala), it was inactive on peptides containing Pro or Gly, and may thus contribute to the development of cheese flavour by processing bitter peptides.     

Comparative study of the treatment of prostatic adenoma: laser photocoagulation versus endoscopic resection

OBJECTIVE: Resection of the prostate using a Nd YAG laser is designed to destroy benign prostatic hyperplasia responsible for bladder neck obstruction. This technique is currently under investigation. PATIENTS AND TECHNIQUE: A total of 56 patients, with a minimal follow-up of 6 months and presenting indications for endoscopic resection of the prostate were treated by TULIP [22] or VLAP [34] laser coagulation. The objective and subjective results were compared to a group of patients [30] treated by endoscopic resection during the same period. Results are expressed as the percentage of patient responding to treatment in terms of objective (peak flow rate > 15 ml/s with improvement > 30% or between 12 and 15 ml, but improvement > 50%) and subjective parameters (IPSS < 7 and improvement > 30% or between 7 and 10, but improvement < 50%). RESULTS: With a minimal follow-up of 6 months, the objective response rates were 55.5% (TULIP), 84.6% (VLAP) and 83.2% (TURP), while the subjective response rates were 55.5% (TULIP), 92.3% (VLAP) and 83.3% (TURP). The hospital stay was significantly shorter in the laser group (2.1 VLAP and 3.3 TULIP; 4.93 TURP). In the TULIP group, 3 patients were incontinent and 4 developed chronic prostatitis. At 6 months, 4 patients in the VLAP group and 6 patients in the TULIP group had to undergo a complementary TURP. CONCLUSION: These results indicate that laser photocoagulation is effective in the treatment of benign prostatic hyperplasia. The VLAP technique appears to be better adapted to this indication. The benefit of VLAP will be more clearly demonstrated by the randomized study currently underway, provided the length of hospital stay, postoperative complications and cost-effectiveness ratio are taken into account. In contrast, the TULIP system is associated with numerous complications which appear to be unacceptable.     

Pulmonary and allergy subspecialty care in adults with asthma. Treatment, use of services, and health outcomes

This study examined the relationship of several maternal variables to the duration of exclusive breast-feeding and the total duration of breast-feeding, along with attitudes, perceptions, and beliefs about breast-feeding among women living in poor neighborhoods of Managua, Nicaragua. The field work was carried out in December 1992 and January 1993 using qualitative and quantitative methods. A structured questionnaire was administered in interviews with 556 mothers of children under 12 months of age, and meetings of four directed discussion groups were held, in which a total of 20 women participated. At one week of age, almost all the children of the mothers who were surveyed had been breast-fed, but only 45% had been exclusively breast-fed. At 12 weeks old, 30% were already completely weaned. The discussion groups revealed the coexistence of positive opinions about both breast-feeding and bottle-feeding. However, exclusive breast-feeding was considered harmful for the mother, and breast milk was not thought to be sufficient nourishment for the child. Previous experience was strongly related to the duration of exclusive breast-feeding and to total breast-feeding duration. Attitudes, social support, and work situation were important factors influencing the total length of time women breast-fed a child. In general, the results obtained through the interviews and in the discussion groups were in agreement and showed that the elements needed to promote exclusive breast-feeding were social support, a favorable community environment, and policies that dealt with problems faced by working mothers. The complementary research methods were useful for obtaining information about the relative importance of different factors that determine the duration of breast-feeding and for understanding that practice in greater depth from the mother's point of view.     

Identification and analysis of genes from Streptomyces pristinaespiralis encoding enzymes involved in the biosynthesis of the 4-dimethylamino-L-phenylalanine precursor of pristinamycin I

Dextran has been used as a carrier molecule for the synthesis of monofunctional peptide-dextran conjugates. The immunodetection of such carrier immobilized peptides on ELISA plates was compared to that of peptides adsorbed directly to immunoplates. The main features observed with peptide-dextran conjugates were as follows: only small amounts of peptide (1-2 mg) were necessary for coupling via alpha- or epsilon-amino groups to NaIO4-activated dextran (4 mg); the coupling yield was up to 68%; an amino acid analysis of the conjugate enabled the amount of carrier immobilized peptide to be calculated; an estimated 15-17 peptides were bound per dextran molecule (MW 73,500); using a carbohydrate as carrier reduces the possibility of non-specific interactions because no hydrophobic or ionic sites and no protein-like epitopes exist on the carrier apart from the peptide ligand. It can be assumed that some peptide ligands provide the forces for an interaction with the plate surface whereas other remain free for the interaction with the antibody. Thus, the detection with monoclonal anti-peptide antibodies allowed peptide-dextran conjugates to be used at coating concentrations of 1-3 nM peptide, corresponding to 0.6-2.6 ng peptide-dextran per well. In contrast, concentrations of 150-500 nM were required for coating with peptides. The applicability of monofunctional peptide-dextran conjugates was demonstrated by investigating the titer and specificity of a polyclonal anti-peptide serum developed against human gastrointestinal glutathione peroxidase. The introduction of biotin as a second ligand of the dextran conjugate permitted its capture on streptavidin coated plates. This synthesis of bifunctional peptide-biotin-dextran conjugates opens up additional possibilities for applications.     

EXPERIMENTAL INFRARED DRYING STUDY OF A MODEL WATER-BASED EPOXY-AMINE PAINTING COATED ON IRON SUPPORT

The aim of this work is to study the infrared drying and curing kinetics of a model water-based epoxy-amine painting coaled on iron support. After a presentation of the model painting elaborated in our laboratory, experimental and theoretical data of the curing kinetics are presented. Then, we described the special laboratory-scale infrared dryer set up in our laboratory. This dryer was able to carry on drying experiments with uniform infrared flux densities between 0 to 25 kW,m^-2 The study of the painting drying as a function of the infrared flux density and of the film thickness shows the influence of these two main physical parameters.     

Incremental inconsistency detection with low memory overhead

Ensuring models’ consistency is a key concern when using a model‐based development approach. Therefore, model inconsistency detection has received significant attention over the last years. To be useful, inconsistency detection has to be sound, efficient, and scalable. Incremental detection is one way to achieve efficiency in the presence of large models. In most of the existing approaches, incrementalization is carried out at the expense of the memory consumption that becomes proportional to the model size and the number of consistency rules. In this paper, we propose a new incremental inconsistency detection approach that only consumes a small and model size‐independent amount of memory. It will therefore scale better to projects using large models and many consistency rules. Copyright © 2012 John Wiley & Sons, Ltd.     

Corrosion behaviour of brazed multilayer material AA4343/AA3003/AA4343: Influence of coolant parameters

This paper is the second part of a work devoted to corrosion in brazed AA4343/AA3003/AA4343 materials on the water side of automotive heater cores. In the first part of the study [S. Tierce, N. Pébère, C. Blanc, C. Casenave, G. Mankowski, H. Robidou, Electrochim. Acta 52 (2006) 1092], corrosion initiation in the surface layer (i.e. the residual cladding) has been investigated. It has been associated to defective sites in the passive film covering the alloy. The defective sites are linked to α-Al(Mn,Fe)Si particles built up during brazing process. Interactions between α-Al(Mn,Fe)Si particles and the matrix are responsible for the observed behaviour. The present study focuses on the propagation of corrosion through the material in neutral water–ethylene glycol mixtures with and without chlorides. Comparison of the electrochemical behaviour of the three layers of the brazed material (i.e. the residual cladding, the “band of dense precipitates (BDP)” and the core material) revealed that the residual cladding was nobler than the BDP and the core material and thus that the corrosion should propagate through the inner layers due to galvanic coupling: the inner layers constitute the anode and the residual cladding the cathode. Increasing the ethylene glycol content in the water–ethylene glycol mixture decreased the rate of consumption of the materials whereas addition of chloride ions increased it. Mass variation measurements of brazed material in different solutions containing the degradation products of ethylene glycol showed that only glycolate ions had a slight detrimental effect. Corrosion tests performed in heater core tubes allowed the propagation mechanisms to be confirmed.     

Workflows for Heliophysics

In this paper we describe how we have introduced workflows into the working practices of a community for whom the concept of workflows is very new, namely the heliophysics community. Heliophysics is a branch of astrophysics which studies the Sun and the interactions between the Sun and the planets, by tracking solar events as they travel throughout the Solar system. Heliophysics produces two major challenges for workflow technology. Firstly it is a systems science where research is currently developed by many different communities who need reliable data models and metadata to be able to work together. Thus it has major challenges in the semantics of workflows. Secondly, the problem of time is critical in heliophysics; the workflows must take account of the propagation of events outwards from the sun. They have to address the four dimensional nature of space and time in terms of the indexing of data. We discuss how we have built an environment for Heliophysics workflows building on and extending the Taverna workflow system and utilising the myExperiment site for sharing workflows. We also describe how we have integrated the workflows into the existing practices of the communities involved in Heliophysics by developing a web portal which can hide the technical details from the users, who can concentrate on the data from their scientific point of view rather than on the methods used to integrate and process the data. This work has been developed in the EU Framework 7 project HELIO, and is being disseminated to the worldwide Heliophysics community, since Heliophysics requires integration of effort on a global scale.