Engineering egress data considering pedestrians with reduced mobility

To quantify the evacuation process, evacuation practitioners use engineering egress data describing the occupant movement characteristics. These data are typically based to young and fit populations. However, the movement abilities of occupants who might be involved in evacuations are becoming more variable—with the building populations of today typically including increasing numbers of individuals: with impairments or who are otherwise elderly or generally less mobile. Thus, there will be an increasing proportion of building occupants with reduced ability to egress. For safe evacuation, there is therefore a need to provide valid engineering egress data considering pedestrians with disabilities. Gwynne and Boyce recently compiled a series of data sets related to the evacuation process to support practitioner activities in the chapter Engineering Data in the SFPE Handbook of Fire Protection Engineering. This paper supplements these data sets by providing information on and presenting data obtained from additional research related to the premovement and horizontal movement of participants with physical‐, cognitive‐, or age‐related disabilities. The aim is to provide an overview of currently available data sets related to, and key factors affecting the egress performance of, mixed ability populations which could be used to guide fire safety engineering decisions in the context of building design.     

Oxygen Tracer Diffusion in Vitreous Silica

Oxygen diffusion in vitreous silica glass is studied using the gas exchange technique. The tracer concentration profiles are consistent with a model based on two mechanisms, one network and the other interstitial. These processes are coupled through limited network–interstitial exchange. Nuclear reaction analysis and secondary ion mass spectrometry techniques are performed and compared. These results are compared to experiments on transport in thin silica films grown on single-crystal silicon.     

Comparisons of Urban Travel Forecasts Prepared with the Sequential Procedure and a Combined Model

Detailed analyses and comparisons of urban travel forecasts prepared by applying the state-of-practice sequential procedure and the solution of a combined network equilibrium model are presented. The sequential procedure for solving the trip distribution, mode choice and assignment problems with feedback is the current practice in most transportation planning agencies, although its important limitations are well known. The solution of a combined model, in contrast, results from a single mathematical formulation, which ensures a well-converged and consistent result. Using a real network, several methods for solving the sequential procedure with feedback are compared to the solution of the combined model ESTRAUS. The results of these methods are shown to have various levels of instability. The paper concludes with a call for a new paradigm of travel forecasting practice based on an internally consistent model formulation that can be solved to a level of precision suitable for comparing alternative scenarios.     

Oral health assessment in dogs: study design and results

The authors have conducted a large number of canine dental studies during the past six years. Study methodologies have been driven by the need for statistical validation of results, requiring the participation of large numbers of animals in each study. For plaque, stain, and calculus evaluations, a "clean tooth" model was used, in which formation of these substrates was assessed days to weeks after an initial coronal cleaning. A primary goal of the studies described was to validate the study designs used--that is, to use accepted plaque-, calculus-, and stain-controlling agents to test whether the study methods could detect differences between treated and untreated groups. The results of clinical studies show that the methods described can be used to identify plaque, calculus, and stain control attributable to chemical agents, oral hygiene aids, and consumable products.     

On techniques for angle compensation in nonideal iris recognition.

The popularity of the iris biometric has grown considerably over the past two to three years. Most research has been focused on the development of new iris processing and recognition algorithms for frontal view iris images. However, a few challenging directions in iris research have been identified, including processing of a nonideal iris and iris at a distance. In this paper, we describe two nonideal iris recognition systems and analyze their performance. The word "nonideal" is used in the sense of compensating for off-angle occluded iris images. The system is designed to process nonideal iris images in two steps: 1) compensation for off-angle gaze direction and 2) processing and encoding of the rotated iris image. Two approaches are presented to account for angular variations in the iris images. In the first approach, we use Daugman's integrodifferential operator as an objective function to estimate the gaze direction. After the angle is estimated, the off-angle iris image undergoes geometric transformations involving the estimated angle and is further processed as if it were a frontal view image. The encoding technique developed for a frontal image is based on the application of the global independent component analysis. The second approach uses an angular deformation calibration model. The angular deformations are modeled, and calibration parameters are calculated. The proposed method consists of a closed-form solution, followed by an iterative optimization procedure. The images are projected on the plane closest to the base calibrated plane. Biorthogonal wavelets are used for encoding to perform iris recognition. We use a special dataset of the off-angle iris images to quantify the performance of the designed systems. A series of receiver operating characteristics demonstrate various effects on the performance of the nonideal-iris-based recognition system.     

Grain Boundary Responses to Heterogeneous Deformation in Tantalum Polycrystals

The evolution of heterogeneous deformation in a tantalum polycrystal was examined during a three-point bending experiment using electron backscatter pattern mapping. Slip bands formed at strains as low as 1%, and they became more intense with strain. Heterogeneous deformation was evident as intragranular orientation gradients as large as 30° were observed after a strain of about 8%. Nonmonotonic changes in the local average misorientation distribution were observed, implying that dislocation substructure developed in a complex manner. Slip bands were analyzed using plane traces computed from local orientation information. With the assumption of uniaxial stress, Schmid factors for favorable slip systems were identified for each grain and compared with observations, showing evidence for macroscopic activity on both {110} and {112} slip systems. Reconstructed boundary data were used to estimate the geometric potential for slip transfer at grain boundaries. The correlations indicated that when active slip systems were favorably oriented for slip transfer across the boundary, it was often observed in the form of continuous slip bands aligned across the boundary. In boundaries where geometrical alignment and Schmid factors were not favorable for slip transfer, there was a higher likelihood to form ledges (topographic discontinuities) along the grain boundaries. Dislocation pileups at grain boundaries were also correlated with a low potential for slip transfer.     

A hybrid approach to computing electrostatic forces in fluidized beds of charged particles

In particulate flow devices particles acquire electric charge through triboelectric charging, and resulting electrostatic forces can alter hydrodynamics. To capture this effect, the electrostatic force acting on individual particles in the device should be computed accurately. Electrostatic force is calculated using a hybrid approach consisting of: (1) long‐range contributions from an Eulerian electric field solved using the Poisson equation (2) short‐range contributions calculated using a truncated pairwise sum and (3) a correction to avoid double counting. Euler‐Lagrange simulation of flows incorporating this hybrid approach reveals that bed height oscillations in small fluidized beds of particles with monopolar charge decreases with increasing charge level, which is related to lateral segregation of particles. A ring‐like layer of particles, reported in experimental studies, forms at modestly high charge levels. Beds with equal amounts of positively and negatively charged particles are fluidized in a manner similar to uncharged particles. © 2016 American Institute of Chemical Engineers AIChE J, 62: 2282–2295, 2016