A signal theory approach to the space and frequency variant filtering performed by the human visual system

A mathematical representation is given of the processing performed by the peripheral nervous cells of the human visual system. This representation consists essentially of a set of shift-variant convolutions, implying non-uniform resolutions in both the space and frequency domains. A remarkable property of such “convolutions” is the form-invariance of their outputs with respect to (size) linear scalings of the inputs. It is shown that this latter property is a necessary support of the hypothesis according to which the visual system translates linear scalings of the (retinal) inputs into shifts of the (cortical) outputs.     

Cu-based metallic glass particle additions to significantly improve overall compressive properties of an Al alloy

We report the development of a novel light-weight Al (520) alloy-based composite reinforced with particles of a Cu-based (Cu₅₄Zr₃₆Ti₁₀) metallic glass by mechanical milling followed by induction heated sintering. The consolidation of the composite is performed at a temperature in the super-cooled liquid region of the metallic glass just above its glass-transition temperature (T_g). Metallic glasses are a promising alternative reinforcement material for metal-matrix composites capable of producing significant strengthening along with a «friendly» sintering behavior. The mechanical milling procedures were properly established to allow reduction of the size of the metallic glass particles and their uniform distribution in the matrix. Microstructural observation of the composite did not reveal any porosity. The interface between the glassy particles and the matrix remained free of such defects. The fully dense consolidated composite showed a drastic gain in specific yield strength under compression relative to the matrix alloy and appreciable plasticity at fracture.     

The “Roman pot” spectrometer and the vertex detector of experiment UA4 at the CERN SPS collider

We describe the apparatus used in experiment UA4 to study proton-antiproton elastic and inelastic interactions at the CERN SPS Collider. Elastically scattered particles, travelling at very small angles, are observed by detectors placed inside movable sections (“Roman pots”) of the SPS vacuum chamber. The deflection in the field of the machine quadrupoles allow the measurement of the particle momentum. Inelastic interactions are observed by a left-right symmetric system of trigger counter hodoscopes and drift-chamber telescopes. The apparatus reconstructs the interaction vertex and measures the pseudorapidity η of charged particles in the range 2.5 < 6η6 < 5.6.     

Combining social media affordances for organising collective action

Social media provide new opportunities for supporting the dynamics of collective action (CA), allowing for the mobilisation of people into debates and involving them in new forms of collective decision making. Although current studies focus on opportunities offered by social media for collective action, there is still a need to deepen the understanding of how social media support the organisation of CA and to study the effects of individual actions performed on social media in complex organisational settings. We here explore how social media are used to manage CA by the Italian political movement Movimento Cinque Stelle, using the concept of affordances as the conceptual framing. Based on the qualitative case analyses, our study contributes to the knowledge base by identifying a typology of nine affordances supporting CA and exploring how the combined actualisations of some affordances of the typology create antecedents of the fundamental processes of CA. On the basis of the study analysis, we suggest a model to describe how social media support CA through affordances, their combinations, and the creation of antecedents and then formulate implications for research and practice.     

Brazing copper to alumina using reactive CuAgTi alloys

The purpose of this work was to describe and discuss the fundamental issues involved in reactive brazing of alumina to copper by CuAgTi alloys. The method used to bring the Ti to the CuAg braze enabled the Ti concentration in the braze to be varied to a large extent (from 0.8 to 6 wt.%). It was then possible to study the effects of this parameter on the interfacial chemistry and joint microstructure, as well as on the mechanical performance of the brazing joints, characterized by tensile tests. The mechanical strength of metal/alumina joints processed by reactive brazing was also compared with data obtained using a standard metallization process.     

A state observer for the Virgo inverted pendulum

We report an application of Kalman filtering to the inverted pendulum (IP) of the Virgo gravitational wave interferometer. Using subspace method system identification techniques, we calculated a linear mechanical model of Virgo IP from experimental transfer functions. We then developed a Kalman filter, based on the obtained state space representation, that estimates from open loop time domain data, the state variables of the system. This allows the observation (and eventually control) of every resonance mode of the IP mechanical structure independently.     

Suction feeding by elephants

Despite having a trunk that weighs over 100 kg, elephants mainly feed on lightweight vegetation. How do elephants manipulate such small items? In this experimental and theoretical investigation, we filmed elephants at Zoo Atlanta showing that they can use suction to grab food, performing a behaviour that was previously thought to be restricted to fishes. We use a mathematical model to show that an elephant’s nostril size and lung capacity enables them to grab items using comparable pressures as the human lung. Ultrasonographic imaging of the elephant sucking viscous fluids show that the elephant’s nostrils dilate up to 30% in radius, which increases the nasal volume by 64%. Based on the pressures applied, we estimate that the elephants can inhale at speeds of over 150 m s⁻¹, nearly 30 times the speed of a human sneeze. These high air speeds enable the elephant to vacuum up piles of rutabaga cubes as well as fragile tortilla chips. We hope these findings inspire further work in suction-based manipulation in both animals and robots.     

Experimental systems implementation of a hybrid optical-digital correlator

A high-speed hybrid optical-digital correlator system was designed, constructed, modeled, and demonstrated experimentally. This correlator is capable of operation at approximately 3000 correlations/s. The input scene is digitized at a resolution of 512 x 512 pixels and the phase information of the two-dimensional fast Fourier transform calculated and displayed in the correlator filter plane at normal video frame rates. High-fidelity reference template images are stored in a phase-conjugating optical memory placed at the nominal input plane of the correlator and reconstructed with a high-speed acousto-optic scanner; this allows for cross correlation of the entire reference data set with the input scene within one frame period. A high-speed CCD camera is used to capture the correlation-plane image, and rapid correlation-plane processing is achieved with a parallel processing architecture.     

Real-time volume rendering of MRCP: clinical applications

MR-cholangiopancreatography (Signa Contour 0.5T; GE/Medical Systems, Milwaukee, WI) data sets of 156 patients, obtained with a 2D T2-weighted FSE sequence, in the coronal plane, were volume rendered (Advantage Windows 3.1; GEMS) independently by two radiologists, that were asked to define the range of signal intensitics in which the signal of the pancreaticobiliary system was included and to rank the quality of native images and volume renderings. Patients had biliary stones (n=47), inflammatory ampullary stenoses (n=18), pancreaic tumors (n=12), surgical bilio-enteric anastomoses (n=19), ampullary carcinomas (n=2), pancreatic duct stone (n=1), cholangiocarcinoma (n=3) and normal pancreaticobiliary tree (n=54). Good quality volume renderings of the bile ducts were obtained for at least a maximum diameter of 1.5 mm. The quality rank agreement between volume rendering and native images was excellent (k=0.94). The correlation between the observers for the setting the signal intensity range was excellent and statistically significant (p<0.001). The correlation between the observers for the time of volume rendering was not statistically significant. Bilary stones could be displayed in 32/47 (68%) cases. The pancreatic duct stones was displayed as well. Inflammatory ampullary stenoses were detected in all cases (100%). In case of pancreatic tumors, cholangiocarcinomas and ampullary carcinomas volume rendering allowed to identify the site of stenosis. In surgical bilio-enteric anastomoses volume rendering was helpful to display the residual bilary tract, the site of anastomosis and the enteric tract. Volume rendering could be a reliable and efficient tool for the study of the anatomy and pathological changes of the pancreaticobiliary tract. Note: keywords have been selected from the Index to imaging literature (January 1999), of the RSNA (Supplement to Radiology).