The Effects of H2O, CO and CO2 on the H2 Permeance and Surface Characteristics of 1 mm Thick Pd80wt%Cu Membranes

The hydrogen permeance of 1 mm-thick Pd_80wt%Cu foils was measured in the presence of equimolar mixtures of H₂ with CO, CO₂ or H₂O over the temperature and total pressure ranges of 623–1,173 K and 0.62–2.86 MPa, respectively. In all cases, permeance losses at 623 and 738 K were very modest. At higher temperatures, more significant decreases in membrane permeance were observed with the highest reduction of about 50% occurring when macroscopic carbon deposition occurred on the membrane surface during H₂–CO exposure at 908 K. The more worrisome effects of exposure to these gases, however, were the micron-scale surface defects observed at 908 and 1,038 K. Although the 1 mm thick disk membranes retained their mechanical integrity, such defects could cause catastrophic failure of ultra-thin, Pd–Cu membranes (1–5 μm thick) deposited on porous substrates.     

Rehabilitation of disorders of the breaking of voice

The adolescent's breaking of the voice is the result of the substitution of the chest voice (or heavy mechanism) for the head voice (or light mechanism). In cases of late breaking, the voice is abnormally high-pitched and feeble, often with a distorted timbre, while the larynx is normal and pubescent. Such people are generally not fully aware of their voices' real nature. Therapy classically resorts to laryngeal manipulations, of which a new technique is put forward. Another therapeutic approach is based, on the one hand, on critical listening compared with a control male voice, thus enabling the subject to become aware of his own voice, and, on the other hand, on high intensity work which helps passing from head to chest voice.     

Parallel associative combinator evaluation II

A new evaluation model for SK combinator expressions is presented and used as a basis for the design of a novel processor. The resulting machine architecture resembles a dataflow ring, but executions are constrained to be fully lazy. An automatic dynamic load sharing mechanism for a distributed multiprocessor architecture is suggested, and initial simulation results are presented.     

Creativity in non‐routine jobs: The role of transformational leadership and organizational identification

An increasing number of individuals work in jobs with little standardization and repetition, that is, with high levels of job non‐routinization. At the same time, demands for creativity are high, which raises the question of how employees can use job non‐routinization to develop creativity. Acknowledging the importance of social processes for creativity, we propose that transformational leaders raise feelings of organizational identification in followers and that this form of identification then helps individuals to develop creativity in jobs with little routinization. This is because organizational members evaluate and promote those ideas as more creative, which are in line with a shared understanding of creativity within the organization. To investigate these relationships, we calculated a mediated moderation model with 173 leader–follower dyads from China. Results confirm our hypotheses that transformational leadership moderates the relationship between job non‐routinization on employee creativity through organizational identification. We conclude that raising feelings of social identity is a key task for leaders today, especially when working in uncertain and fast developing environments with little repetition and the constant need to develop creative ideas.     

Structure–property relationships for sulfonated poly(butylene terephthalate)

Structure–property relationships have been developed for sulfonated poly(butylene terephthalate) copolymers. The compositional variables investigated were sulfonate content, molecular weight, and polymer endgroup composition, and the fundamental polymer properties evaluated were melt viscosity, crystallization kinetics, and impact strength. It was found that all compositional variables significantly affect all of the polymer properties of interest. The most interesting effect is the influence of polymer endgroup composition on polymer properties. The trends indicate that the carboxylic acid endgroups form intermolecular interactions with sodium sulfonate groups, resulting in a decrease in the strength of intermolecular ionic interactions between sodium sulfonate groups. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4662–4771, 2006     

Combinatorial materials research applied to the development of new surface coatings: II. Process capability analysis of the coating formulation workflow

A combinatorial process has been developed for the high throughput production and evaluation of surface coatings. The workflow designed for the production of arrays of liquid coatings involves the robotic transfer of aliquots of solutions of raw materials to an array of glass vials and mixing of the coatings using an unconventional magnetic stirring process. An investigation of the capability of the workflow to accurately and repeatedly prepare coating arrays was conducted as a function of solution viscosity and aliquot size. In addition, mixing capability was evaluated as a function of solution viscosity, total solution volume, and mechanism of stirring. Overall, the results of the study indicated that adequate accuracy and repeatability of the coating preparation process can be achieved as long as raw material solutions are designed such that viscosity is below about 250 cP and aliquot sizes are above about 75 μl. With regard to mixing capability, total solution volume was found to have a profound affect as did the stirring mechanism.     

Combinatorial chemistry methods for coating development: VI. Correlation of high throughput screening methods with conventional measurement techniques

Combinatorial chemistry has proven to be a valuable tool for the development of new compounds. In the pharmaceutical industry, where combinatorial chemistry began, the approach has been instrumental in the high-speed development of new drugs. Due to the overwhelming success of the combinatorial methodology in the pharmaceutical industry, it has been recently applied to materials development. We have recently developed a combinatorial factory capable of preparing and evaluating on the order of 100 organic clear coatings in a day.

One of the most challenging aspects of the creation of the combinatorial factory was the development of the high throughput screening (HTS) methods for the primary coating properties of interest such as optical clarity, abrasion resistance, adhesion, and weatherability. For each property, an entirely new method was developed that allowed for rapid measurement of these properties on very small samples. This paper describes various aspects of the development of these novel measurement systems including the correlation of the HTS methods with conventional, industry standard measurement methods.     

The use of CFD modelling to optimise measurement of overflow rates in a downstream-controlled dual-overflow structure

The measurement of the flow through complex combined sewer overflow structures in the frame of automated monitoring remains difficult. In this paper, a methodology based on the use of computational fluid dynamics (CFD) modelling in order to improve the instrumentation of a downstream-controlled dual-overflow structure is presented. The dual-overflow structure is composed of two combined sewer overflows (CSOs) connected by a rectangular channel and controlled by a downstream gate located at the entry of the Meyzieu waste water treatment plant (close to Lyon, France). The analysis of the CFD results provides: (i) a better understanding of the interaction between the two CSOs--that means the hydraulic operation, the hydrodynamic behaviour, the backflow effect--and (ii) an ability to optimise the location of the water depth sensor. The measured water depth is used to assess the overflow rate by means of a numerical relationship. Uncertainties are also assessed.     

A framework for computer-aided validation

This paper presents a framework for augmenting independent validation and verification (IV&V) of software systems with computer-based IV&V techniques. The framework allows an IV&V team to capture its own understanding of the application as well as the expected behavior of any proposed system for solving the underlying problem by using an executable system reference model, which uses formal assertions to specify mission- and safety-critical behaviors. The framework uses execution-based model checking to validate the correctness of the assertions and to verify the correctness and adequacy of the system under test.     

Grain Boundary Responses to Heterogeneous Deformation in Tantalum Polycrystals

The evolution of heterogeneous deformation in a tantalum polycrystal was examined during a three-point bending experiment using electron backscatter pattern mapping. Slip bands formed at strains as low as 1%, and they became more intense with strain. Heterogeneous deformation was evident as intragranular orientation gradients as large as 30° were observed after a strain of about 8%. Nonmonotonic changes in the local average misorientation distribution were observed, implying that dislocation substructure developed in a complex manner. Slip bands were analyzed using plane traces computed from local orientation information. With the assumption of uniaxial stress, Schmid factors for favorable slip systems were identified for each grain and compared with observations, showing evidence for macroscopic activity on both {110} and {112} slip systems. Reconstructed boundary data were used to estimate the geometric potential for slip transfer at grain boundaries. The correlations indicated that when active slip systems were favorably oriented for slip transfer across the boundary, it was often observed in the form of continuous slip bands aligned across the boundary. In boundaries where geometrical alignment and Schmid factors were not favorable for slip transfer, there was a higher likelihood to form ledges (topographic discontinuities) along the grain boundaries. Dislocation pileups at grain boundaries were also correlated with a low potential for slip transfer.