Quantitative analysis of ephedrines in urine by HPLC

Simultaneous determination of six ephedrines in urine sample has been achieved by high performance liquid chromatography on a Lichrospher RP-18 column, using methylamphetamine as internal standard. The 6 ephedrines are well separated in 25 minutes with resolution better than 1.8. This method has high recovery, selectivity and reproducibility, and the linearity is satisfactory from 1.5 micrograms/ml to 25 micrograms/ml with correlation coefficients better than 0.999.     

Revised cutoff values of serum aminotransferase in detecting viral hepatitis among CAPD patients: experience from Taiwan, an endemic area for hepatitis B

BACKGROUND: To determine the best cutoff values of aspartate aminotransferase (AST) and alanine amino-transferase (ALT) in detecting viral hepatitis C infection among patients of continuous ambulatory peritoneal dialysis (CAPD). METHODS: 90 (44 male and 46 female) CAPD patients and 526 adult controls (266 male, 260 female) were enrolled. Serum AST and ALT were measured by an auto-analyser monthly. Serum HBsAg was examined using a RIA method and anti-HCV by an second-generation EIA method. The best cutoff values of AST and ALT for detecting viral hepatitis were obtained from the ROC (receiver-operating characteristic) curve. RESULTS: The prevalence of anti-HCV(+) was significantly higher in CAPD patients (16.7%) than in normal controls (4.9%), while that of HBsAg(+) was similar in both groups. CAPD patients had significantly lower levels of serum aminotransferases compared to normal controls. Mean AST were 23.8 IU/l in normal control and 18.8 IU/l in the CAPD patients (P < 0.001). Mean ALT were 21.9 IU/l in normal controls and 15.3 IU/l in the CAPD patients (P < 0.001). CAPD patients with HCV infection had higher serum AST and ALT levels than those without. However, HBV infection did not cause significant serum aminotransferase elevation in patients. The conventional cutoff values of AST (40 IU/l) and ALT (40 IU/l) for detecting viral hepatitis yielded only a sensitivity of 27.3 and 18.2% respectively; on the contrary, our revised cutoff values of AST (24 IU/l) and ALT (17 IU/l) had better sensitivities (AST, 72.7%; ALT, 63.6%). For serial aminotransferase values, the sensitivity of AST and ALT for detecting HCV were 36.4 and 27.3% by conventional criteria, and were both 81.8%, by our newly revised criteria. CONCLUSIONS: Serum aminotransferase cutoff values should be modified for screening viral hepatitis in a CAPD population. Our new cutoff criteria had important clinical implications in providing benefits of earlier detection and possible prevention from chronic hepatic deteriorations.     

Partial congenital defect of the left pericardium: angiographic diagnosis and treatment by thoracoscopic pericardiectomy: case report

Twenty-six patients with an intracardiac myxoma underwent surgical resection at our institution from 1977 through 1992. Left atrial myxoma was diagnosed in 22 patients, left ventricular in 1, right atrial in 2, and right ventricular in 1. Six patients were asymptomatic; preoperative symptoms included dyspnea, arrhythmias, embolic episodes, and syncope. The diagnosis was established with transthoracic echocardiography in all cases but one. Surgery was performed in all cases with the aid of cardiopulmonary bypass with moderate hypothermia and cold crystalloid cardioplegia. One patient with a left ventricular myxoma died in a comatose state during the immediate postoperative period. Long-term clinical and echocardiographic evaluation was performed in 19 patients; results were excellent (all the patients were in New York Heart Association functional class I or II), and no recurrences were documented. The clinical characteristics, diagnostic methods, and surgical approach are presented and discussed.     

A hyperplastic anterior choroidal artery with double persistent anastomotic channels

We describe a case of a hyperplastic anterior choroidal artery (AChA) with double persistent anastomotic channels. This hyperplastic AChA, which was detected at vertebral angiography, is different from previously reported cases, because it has an unusual, secondary anastomotic channel.     

A PC program for diagnosing abnormal growth, growth velocity and acceleration from longitudinal observations

A human fibroblastic cell line transformed by the SV40-T antigen sequence and continuously cultured for 7 months displayed large periodic variations in cell proliferation. This contrasted with other characteristics of this cell line that remained constant: mosaic cell shape, absence of cell contact inhibition, and predominance of a hypodiploid population. Similar fluctuations in proliferative capacity were also found during the long-term growth of a transformed but nonimmortalized human fibroblastic line prior to senescence, and in the established hamster fibroblastic Nil cell line. This growth pattern suggests a recurrent stimulation of growth in these three transformed cell lines. The proliferation pattern from cultured transformed cells may thus be complex and requires further investigation. These variations presumably influence major cell functions. This observation has important implications for the analysis of data from such cell lines.     

The microstructure of Cu films deposited by the self-ion assisted technique

The microstructures of Cu films deposited by the self-ion assisted, partially ionized beam (PIB) deposition technique under two different accelerating potentials, 0 KeV and 6 KeV, are compared. The 6 KeV film shows a bimodal (111) fiber and (100) fiber texture with an abundance of twin boundaries and a relatively large average grain size with a typical lognormal distribution. The 0 KeV film consists of small, mostly (111) oriented grains with islands of abnormally large (100) grains. The controlling factors for the abnormal growth of the (100) grains are discussed in relation to the observed microstructures, showing that all factors necessary for abnormal (100) growth are present in the films.     

Equal-channel angular extrusion of beryllium

The equal-channel angular extrusion (ECAE) technique has been applied to a powder metallurgy (P/M) source Be alloy. Extrusions have been successfully completed on Ni-canned billets of Be at approximately 425°C. No cracking was observed in the billets, and significant grain refinement was achieved. In this article, microstructural features and dislocation structures are discussed for a singlepass extrusion, including evidence of <c> and <c+a> dislocations. Significant crystallographic texture developed during ECAE, which is discussed in terms of this unique deformation processing technique and the underlying physical processes which sustain the deformation. S.R. AGNEW, formerly with the Oak Ridge National Laboratory, Oak Ridge, TN 37831-6115 This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

Simultaneous sulfide and acetate oxidation under denitrifying conditions using an inverse fluidized bed reactor

BACKGROUND: Simultaneous removal of sulfur, nitrogen and carbon compounds from wastewaters is a commercially important biological process. The objective was to evaluate the influence of the CH₃COO^?/NO₃^? molar ratio on the sulfide oxidation process using an inverse fluidized bed reactor (IFBR). RESULTS: Three molar ratios of CH₃COO^?/NO₃^? (0.85, 0.72 and 0.62) with a constant S^2?/NO₃^? molar ratio of 0.13 were evaluated. At a CH₃COO^?/NO₃^? molar ratio of 0.85, the nitrate, acetate and sulfide removal efficiencies were approximately 100%. The N₂ yield (g N₂ g^?1 NO₃^?‐N consumed) was 0.81. Acetate was mineralized, resulting in a yield of 0.65 g inorganic‐C g^?1 CH₃COO^?‐C consumed. Sulfide was partially oxidized to S⁰, and 71% of the S^2? consumed was recovered as elemental sulfur by a settler installed in the IFBR. At a CH₃COO^?/NO₃^? molar ratio of 0.72, the efficiencies of nitrate, acetate and sulfide consumption were of 100%, with N₂ and inorganic‐C yields of 0.84 and 0.69, respectively. The sulfide was recovered as sulfate instead of S⁰, with a yield of 0.92 g SO₄^2?‐S g^?1 S^2? consumed. CONCLUSIONS: The CH₃COO^?/NO₃^? molar ratio was shown to be an important parameter that can be used to control the fate of sulfide oxidation to either S⁰ or sulfate. In this study, the potential of denitrification for the simultaneous removal of organic matter, sulfide and nitrate from wastewaters was demonstrated, obtaining CO₂, S⁰ and N₂ as the major end products. Copyright © 2008 Society of Chemical Industry