The measurement of solar array discharges in a simulated spaceenvironment

A spacecraft in a plasma builds up charge on all the dielectric surfaces and interfaces. Once the net charge exceeds the dielectric breakdown of the material, a discharge occurs. One of the more susceptible pieces of equipment is the antenna/receiver system. The radiated E-field may be strong enough to create an ambiguous signal which may be misinterpreted by the system electronics and cause a system malfunction. A technique is developed to monitor the radiated E-field of materials discharging in an electron environment, using vacuum chambers for measuring the material discharges which are made of highly reflective materials. These chambers affect the radiated E-field due to multiple reflections from the walls. The technique developed defines a method for correcting the effects caused by the measurement facilities. The methodology is: monitor the radiated E-field with a broadband dipole antenna, and digitize the radiated signal as a function of time. Determine the frequency response of the radiated E-field using an FFT algorithm. Measure the transmission and reflection characteristics of the two-port network inside the measurement chamber, and determine the impedance network from the measured E-parameters across the frequency band of interest. Transform the measured E-field frequency response through the impedance network to obtain the frequency response of the actual radiated discharge current. Find the inverse FFT of this response to obtain the actual radiated discharge current response. This technique aids in the prediction of the E-field coupling into receive antennas on-board actual satellites     

Cerebrovascular effects of analgosedation

The in vitro drug sensitivity of three dihydrofolate reductase inhibitors (pyrimethamine, cycloguanil, trimethoprim) was determined against 29 strains and isolates of Plasmodium falciparum by an isotopic semi-microtest. Trimethoprim is less active than pyrimethamine or cycloguanil and its activity is correlated with that of two other inhibitors, suggesting cross-resistance in vitro among the dihydrofolate reductase inhibitors.     

Phase behavior of ternary blends containing dimethylpolycarbonate,tetramethylpolycarbonate and poly[styrene‐co‐(methyl methacrylate)] copolymers (or polystyrene)

The miscibility and phase behavior of ternary blends containing dimethylpolycarbonate (DMPC), tetramethylpolycarbonate (TMPC) and poly[styrene‐co‐(methyl methacrylate)] copolymer (SMMA) have been explored. Ternary blends containing polystyrene (PS) instead of SMMA were also examined. Blends of DMPC with SMMA copolymers (or PS) did not form miscible blends regardless of methyl methacrylate (MMA) content in copolymers. However, DMPC blends with SMMA (or PS) blends become miscible by adding TMPC. The miscible region of ternary blends is compared with the previously determined miscibility region of binary blends having the same chemical components and compositions. The region where the ternary blends are miscible is much narrower than that of binary blends. Based on lattice fluid theory, the observed phase behavior of ternary blends was analyzed. Even though the term representing the Gibbs free energy change of mixing for certain ternary blends had a negative value, blends were immiscible. It was revealed that a negative value of the Gibbs free energy change of mixing was not a sufficient condition for miscible ternary blends because of the asymmetry in the binary interactions involved in ternary blends. Copyright © 2004 Society of Chemical Industry     

Comparison of Lactic Acid Productivities at High Substrate Conversions in a Continuous Two-stage Fermenter With Cell Recycle Using Different Kinetic Models

The steady-state performance of a two-stage recycle fermenter with two different types (I and II) of configurations for staging was investigated numerically for the continuous production of lactic acid. In Type I the bleed broth withdrawn from the first stage is supplied to the second fermenter, and in Type II both filtrate and bleed broth from the first stage are introduced to the second stage. Using four different kinetic models taken from the literature, the effects of operating parameters on the overall lactic acid productivities and the overall substrate conversions are examined. At moderate conversions, productivities for Type I operation are found to be higher than those for Type II and for the single-stage system. In the case of high conversions close to complete consumption, Type II operation is more efficient than the Type I and single-stage systems. For 99% conversion and 40 kg m^-3 substrate feed concentration, productivities for Type II are predicted to be 14-74% higher compared to those for the single-stage system at the same bleed ratios.     

The accuracy of self-monitoring and its relationship to self-focused attention in dysphoria and clinical depression.

The accuracy with which dysphoric (Study 1) and clinically depressed (Study 2) individuals make self-regulatory judgments about their own performance in the absence of external feedback and the extent to which this relates to trait self-focused attention (SFA) were examined. Relative to objective criteria, both dysphoric and depressed participants showed a positive judgment bias, overestimating the number of trials they had performed correctly. Relative to control participants, the dysphoric and depressed groups showed a reduction in the extent of this positive bias in that they judged error trials more accurately and correct trials less accurately. Although the dysphoric and depressed groups both reported elevated trait SFA, this did not correlate significantly with accuracy of self-judgment on the performance-monitoring task. Implications for self-regulation models of depression are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Phacoemulsification with a bevel-down phaco tip: phaco-drill

We present a technique for in situ lens nucleus emulsification using low phaco power and high vacuum, a continuous curvilinear capsulorhexis, and hydrodelineation. Emulsification is done with the phaco tip slanted down 30 or 45 degrees. Cutting and aspiration do not cause an undesirable energy loss. This technique can be combined with the nuclear chopping or divide and conquer methods because of its ability to drill and hold the nucleus. Posterior capsular rupture is prevented because the separated epinucleus acts as a barrier between the nucleus and the cortex. The low power used minimizes the energy transfer to the corneal endothelium. This technique is particularly useful in eyes with brunescent cataract.     

Rapid identification of protein phosphatase 1-binding proteins by mixed peptide sequencing and data base searching. Characterization of a novel holoenzymic form of protein phosphatase 1

Microcystin-affinity chromatography was used to purify 15 protein phosphatase 1 (PP1)-binding proteins from the myofibrillar fraction of rabbit skeletal muscle. To reduce the time and amount of material required to identify these proteins, proteome analysis by mixed peptide sequencing was developed. Proteins are resolved by SDS-polyacrylamide gel electrophoresis, electroblotted to polyvinylidene fluoride membrane, and stained. Bands are sliced from the membrane, cleaved briefly with CnBr, and applied without further purification to an automated Edman sequencer. The mixed peptide sequences generated are sorted and matched against the GenBank using two new programs, FASTF and TFASTF. This technology offers a simple alternative to mass spectrometry for the subpicomolar identification of proteins in polyacrylamide gels. Using this technology, all 15 proteins recovered in PP-1C affinity chromatography were sequenced. One of the proteins, PP-1bp55, was homologous to human myosin phosphatase, MYPT2. A second, PP-1bp80, identified in the EST data bases, contained a putative PP-1C binding site and a nucleotide binding motif. Further affinity purification over ATP-Sepharose isolated PP-1bp80 in a quaternary complex with PP-1C and two other proteins, PP-1bp29 and human p20. Recombinant PP-1bp80 also bound PP-1C and suppressed its activity toward a variety of substrates, suggesting that the protein is a novel regulatory subunit of PP-1.     

Molecular recognition with C-clamp porphyrins: synthesis, structural, and complexation studies

The cholesterolaemic effect of 2 hypercholesterolaemic diets was tested in 12 rat inbred strains. Diet I is a commercial diet supplemented with 2.0% (w/w) cholesterol and 5.0% (w/w) olive oil; diet II is identical to diet I with addition of 0.5% (w/w) sodium cholate. Strains with the highest plasma cholesterol response after diet I (BN and LEW) also had the highest cholesterol response after diet II (hyperresponders, mean response > 3.5 mmol/l). In the strains DA, SHR, BC, WAG, LOU, PVG and BUF the strain mean cholesterol response remained below 1.3 mmol/l after both diets (hyporesponders). Strains F344 and OM had an intermediate cholesterol response after both diets (normoresponders, mean response between 1.3 and 3.5 mmol/l). Only in the strains LOU, PVG and SHR there appeared to be a significant higher cholesterol response after diet II when compared with the cholesterol response after diet I. In the strain WKY this difference was of a borderline significance (P = 0.052) and this strain turned from a normoresponder after diet I into a hyperresponder after diet II. Liver cholesterol levels as measured after feeding diet II for two weeks also appeared to be strain-specific. No correlation was found between the plasma cholesterol response after diet II and the liver cholesterol levels. Changes in plasma phospholipid and triglyceride levels have been measured for both diet I and diet II. For group means a correlation between the cholesterol response and the change in phospholipid levels was found (r = 0.86 for diet I, P < 0.001 and r = 0.76 for diet II, P < 0.01). No such correlation was found for triglyceride levels.