High slew-rate CMOS operational amplifier

A 0.8 /spl mu/m CMOS operational amplifier configuration with a slew rate in excess of 2 V/ns and a unity gain bandwidth of 55 MHz with a load capacitance of 15 pF is proposed. This employs a dynamic technique that turns on a large current source when the rate of change of input is larger than a pre-decided value.     

Control of polishing of diamond films using microactuation and an atmospheric pressure plasma

In this work, the diamond deposited by hot filament chemical vapor deposition (CVD) is polished using an atmospheric pressure plasma. In order to position the film relative to the plasma, a microactuator system is designed using a stack of domed piezoelectric actuators. A dynamic model based on the physical system is developed and the model parameters are measured experimentally. A system based on laser triangulation is used to measure the position of the diamond film relative to the plasma. Control techniques are used to reduce the oscillations during actuation and to eliminate the steady state positioning error. With the application of feedback control, the overshoot is reduced to 2% and the settling time is reduced to 0.3 s. A preliminary set of experiments is performed to relate process parameters to the final surface roughness of the diamond film. The parameters studied include the film's time of exposure to the plasma, the height of the film relative to the plasma, and the distance from the film to the center of the plasma. It is found that the optimum exposure time is 15 min and the reduction of surface roughness is greatest when the distance between the film and the plasma is at a minimum. The best results are obtained when the top of the film is even in elevation with the tip of the top electrode. The diamond film is translated laterally along the plasma. When feedback control is not used, there is no change in the surface roughness. With feedback control implemented, the surface roughness of the diamond film is reduced by 33%.     

A DNA-binding element for a steroid receptor-binding factor is flanked by dual nuclear matrix DNA attachment sites in the c-myc gene promoter

The receptor-binding factor (RBF) for the avian oviduct progesterone (Pg) receptor (PR) has previously been shown to be a unique 10-kDa nuclear matrix protein that generates high affinity PR-binding sites on avian DNA. This paper describes the use of Southwestern blot and DNA gel shift analyses with RBF protein to identify a minimal 54-base pair RBF-binding element in the matrix-associated region (MAR) of the Pg-regulated c-myc gene promoter. This element contains a 5'-GC-rich domain and a 3'-AT-rich domain, the latter of which has a homopurine/homopyrimidine structure. The gel shift assays required the generation of an RBF-maltose fusion protein (RBF-MBP), which specifically binds this element and is supershifted when the anti-RBF polyclonal antibody is added. Computer analysis of the full-length amino acid sequence for RBF predicts a DNA-binding motif involving a beta-sheet structure at the N-terminal domain. Southern blot analyses using nuclear matrix DNA suggests that there are dual MAR sites in the c-myc promoter, which flank an intervening domain containing the RBF element. The co-transfection of this MAR sequence, containing the RBF element and cloned into a luciferase reporter vector, together with an RBF expression vector construct, into steroid treated human MCF-7 cells, results in a decrease of the c-myc promoter activity relative to control transfections containing only the parent vector of the RBF expression construct. These data suggest that a unique chromatin/nuclear matrix structure, composed of the RBF-DNA element complex which is flanked by nuclear matrix attachment sites, serves to bind the PR and repress the c-myc promoter.     

Cerebrovascular effects of analgosedation

The in vitro drug sensitivity of three dihydrofolate reductase inhibitors (pyrimethamine, cycloguanil, trimethoprim) was determined against 29 strains and isolates of Plasmodium falciparum by an isotopic semi-microtest. Trimethoprim is less active than pyrimethamine or cycloguanil and its activity is correlated with that of two other inhibitors, suggesting cross-resistance in vitro among the dihydrofolate reductase inhibitors.     

Phase behavior of ternary blends containing dimethylpolycarbonate,tetramethylpolycarbonate and poly[styrene‐co‐(methyl methacrylate)] copolymers (or polystyrene)

The miscibility and phase behavior of ternary blends containing dimethylpolycarbonate (DMPC), tetramethylpolycarbonate (TMPC) and poly[styrene‐co‐(methyl methacrylate)] copolymer (SMMA) have been explored. Ternary blends containing polystyrene (PS) instead of SMMA were also examined. Blends of DMPC with SMMA copolymers (or PS) did not form miscible blends regardless of methyl methacrylate (MMA) content in copolymers. However, DMPC blends with SMMA (or PS) blends become miscible by adding TMPC. The miscible region of ternary blends is compared with the previously determined miscibility region of binary blends having the same chemical components and compositions. The region where the ternary blends are miscible is much narrower than that of binary blends. Based on lattice fluid theory, the observed phase behavior of ternary blends was analyzed. Even though the term representing the Gibbs free energy change of mixing for certain ternary blends had a negative value, blends were immiscible. It was revealed that a negative value of the Gibbs free energy change of mixing was not a sufficient condition for miscible ternary blends because of the asymmetry in the binary interactions involved in ternary blends. Copyright © 2004 Society of Chemical Industry     

Phacoemulsification with a bevel-down phaco tip: phaco-drill

We present a technique for in situ lens nucleus emulsification using low phaco power and high vacuum, a continuous curvilinear capsulorhexis, and hydrodelineation. Emulsification is done with the phaco tip slanted down 30 or 45 degrees. Cutting and aspiration do not cause an undesirable energy loss. This technique can be combined with the nuclear chopping or divide and conquer methods because of its ability to drill and hold the nucleus. Posterior capsular rupture is prevented because the separated epinucleus acts as a barrier between the nucleus and the cortex. The low power used minimizes the energy transfer to the corneal endothelium. This technique is particularly useful in eyes with brunescent cataract.     

Rapid identification of protein phosphatase 1-binding proteins by mixed peptide sequencing and data base searching. Characterization of a novel holoenzymic form of protein phosphatase 1

Microcystin-affinity chromatography was used to purify 15 protein phosphatase 1 (PP1)-binding proteins from the myofibrillar fraction of rabbit skeletal muscle. To reduce the time and amount of material required to identify these proteins, proteome analysis by mixed peptide sequencing was developed. Proteins are resolved by SDS-polyacrylamide gel electrophoresis, electroblotted to polyvinylidene fluoride membrane, and stained. Bands are sliced from the membrane, cleaved briefly with CnBr, and applied without further purification to an automated Edman sequencer. The mixed peptide sequences generated are sorted and matched against the GenBank using two new programs, FASTF and TFASTF. This technology offers a simple alternative to mass spectrometry for the subpicomolar identification of proteins in polyacrylamide gels. Using this technology, all 15 proteins recovered in PP-1C affinity chromatography were sequenced. One of the proteins, PP-1bp55, was homologous to human myosin phosphatase, MYPT2. A second, PP-1bp80, identified in the EST data bases, contained a putative PP-1C binding site and a nucleotide binding motif. Further affinity purification over ATP-Sepharose isolated PP-1bp80 in a quaternary complex with PP-1C and two other proteins, PP-1bp29 and human p20. Recombinant PP-1bp80 also bound PP-1C and suppressed its activity toward a variety of substrates, suggesting that the protein is a novel regulatory subunit of PP-1.     

Molecular recognition with C-clamp porphyrins: synthesis, structural, and complexation studies

The cholesterolaemic effect of 2 hypercholesterolaemic diets was tested in 12 rat inbred strains. Diet I is a commercial diet supplemented with 2.0% (w/w) cholesterol and 5.0% (w/w) olive oil; diet II is identical to diet I with addition of 0.5% (w/w) sodium cholate. Strains with the highest plasma cholesterol response after diet I (BN and LEW) also had the highest cholesterol response after diet II (hyperresponders, mean response > 3.5 mmol/l). In the strains DA, SHR, BC, WAG, LOU, PVG and BUF the strain mean cholesterol response remained below 1.3 mmol/l after both diets (hyporesponders). Strains F344 and OM had an intermediate cholesterol response after both diets (normoresponders, mean response between 1.3 and 3.5 mmol/l). Only in the strains LOU, PVG and SHR there appeared to be a significant higher cholesterol response after diet II when compared with the cholesterol response after diet I. In the strain WKY this difference was of a borderline significance (P = 0.052) and this strain turned from a normoresponder after diet I into a hyperresponder after diet II. Liver cholesterol levels as measured after feeding diet II for two weeks also appeared to be strain-specific. No correlation was found between the plasma cholesterol response after diet II and the liver cholesterol levels. Changes in plasma phospholipid and triglyceride levels have been measured for both diet I and diet II. For group means a correlation between the cholesterol response and the change in phospholipid levels was found (r = 0.86 for diet I, P < 0.001 and r = 0.76 for diet II, P < 0.01). No such correlation was found for triglyceride levels.