Liquid Marble Patchwork on Super-Repellent Surface

Liquid marble (LM) is a droplet that is wrapped by hydrophobic solid particles, which behave as a non-wetting soft solid. Based on these properties, LM can be applied in fluidics and soft device applications. A wide variety of functional particles have been synthesized to form functional LMs. However, the formation of multifunctional LMs by integrating several types of functional particles is challenging. Here, a general strategy for the flexible patterning of functional particles on droplet surfaces in a patchwork-like design is reported. It is shown that LMs can switch their macroscopic behavior between a stable and active state on super-repellent surfaces in situ by jamming/unjamming the surface particles. Active LMs hydrostatically coalesce to form a self-sorted particle pattern on the droplet surface. With the support of LM handling robotics, on-demand cyclic activation–manipulation–coalescence–stabilization protocols by LMs with different sizes and particle types result in the reliable design of multi-faced LMs. Based on this concept, a single bi-functional LM is designed from two mono-functional LMs as an advanced droplet carrier.     

Fast microwave detection system for coherent synchrotron radiation study at KEK: Accelerator test facility

A fast room temperature microwave detection system based on the Schottky Barrier-diode detector was created at the KEK ATF (Accelerator Test Facility). It was tested using Coherent Synchrotron Radiation (CSR) generated by the 1.28 GeV electron beam in the damping ring. The speed performance of the detection system was checked by observing the CSR from a multi-bunch (2.8 ns bunch separation time) beam. The theoretical estimations of CSR power yield from an edge of bending magnet as well as new injection tuning method are presented. A very high sensitivity of CSR power yield to the longitudinal electron distribution in a bunch is discussed.     

Operation of superconducting fault current limiter using vacuum interrupter driven by electromagnetic repulsion force for commutating switch

Using conventional high‐temperature superconducting wire, a model superconducting fault current limiter (SFCL) is made and tested. Solenoid coil using Bi2223 silver sheath wire is so made that inductance is as small as possible and a vacuum interrupter is connected in series to it. A conventional reactor coil is connected in parallel. When the fault current flows in this equipment, superconducting wire is quenched and current is transferred into the parallel coil because of voltage drop of superconducting wire. This large current in parallel coil actuates magnetic repulsion mechanism of vacuum interrupter. Due to opening of vacuum interrupter, the current in superconducting wire is broken. By using this equipment, current flow time in superconducting wire can be easily minimized. On the other hand, the fault current is also easily limited by large reactance of parallel coil. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 52–61, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20315     

Type A behavior, achievement striving, and a dysfunctional self-evaluation system.

We conducted two experiments to examine the relations among characteristics of how Type A individuals strive for achievement, including goal achievement, self-evaluation, and psychological distress. We evaluated these relations as subjects performed two sequential general information tests. Experiment 1 indicated that achievement striving associated with the Type A behavior pattern is characterized by a tendency to set personal goals in excess of performance and is associated with a low probability of achieving goals. The results of Experiment 2 indicated that the achievement strategy Type A individuals adopted was associated with low self-evaluation of their actual performance. Furthermore, a pre- and postexperiment self-report questionnaire of psychological state suggested that failure to achieve personal goals was related to increased psychological distress. The results of our study suggest that unrealistically high performance standards and failure to achieve personal goals may be a mechanism that triggers the negative psychological states and performance dissatisfaction associated with the Type A behavior pattern. Our study also supports theoretical conceptualizations that excessive achievement striving can act as a potential motivational mechanism. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Design of wavelength-flattened coupler using a novel diagram

A novel diagram which describes the condition of 3 dB coupler is proposed. Using the proposed diagram, the design of a wavelength-flattened 3 dB directional coupler composed of a uniform coupled waveguide is investigated. Normalized waveguide parameters are introduced to characterize a five-layer planar waveguide. This enables us to generalize the discussion and to reduce the number of parameters required for characterizing a coupled waveguide. A broadband 3 dB coupler having 50±5% coupling ratio over a wavelength range of 1.1-1.7 μm is designed     

Left ventricular regional systolic motion in patients with right ventricular pressure overload

The highly reactive and cytotoxic hydroxyl radical (OH) was found by electrochemical detection to be produced in reactions involving hydrogen peroxide (H2O2) and the nitric oxide (NO) donor diethylamine- NO complex. Using aromatic hydroxylation of salicylate as a specific indicator of OH, three salicylate hydroxylation products were identified; catechol, 2,3- and 2,5-dihydroxybenzoic acid. Four additional compounds were detected but not identified. The interactions of H2O2 and NO represent a biologically feasible reaction mechanism that can account for OH-induced damage in cellular environments where transition metal ions are unavailable for participation in the superoxide-mediated Fenton reaction. The ability of the NO/H2O2 complex to generate OH independently of iron or other transition metals provides a new focus for studies concerned with the origin of tissue-specific damage caused by oxygen-derived species.     

Two-dimensional electrophoretic analysis of humoral responses to culture filtrate of Mycobacterium bovis BCG in patients with leprosy and tuberculosis

Various aspects of our communication are well known to have changed over time (1-3). This article describes a cross-sectional study that examined the acoustic characteristics of two groups of Australian women aged 18-25 years from recordings made in 1945 and 1993 and investigated the possible changes in the voice across generations. Archival recordings from 1945 which had been used in a longitudinal study (4) were compared to recordings made in 1993. The results of this study show that women in 1993 have significantly deeper voices than women of the same age recorded in 1945. The possible factors influencing this change are discussed.     

Atrazine, alachlor, and total inorganic nitrogen concentrations of winter wind-eroded sediment samples

Virus-specific CD8+ effector T cells (eCTL) are enriched in the lungs of mice with primary influenza pneumonia, though later detection of memory T cells (mCTL) in the mediastinal lymph nodes (MLN) or spleen by peptide-based staining protocols is at the limits of flow cytometric analysis. Respiratory challenge with an H3N2 virus months after H1N1 priming induces a massive recall response, which reduces virus titers 2-3 days earlier than in nave controls. Influenza-specific mCTL produce interferon-gamma within 6 hr, but still take 4-5 days to localize to the infected respiratory tract. The delay reflects that the recall response develops first in the MLN, which contains relatively few mCTL. The response to a subdominant epitope is less obvious after secondary challenge.     

Dynex: multiplex ELISA technology

Conventional enzyme-linked immunosorbent assay (ELISA) is a gold standard for screening antibodies and testing for protein or antigen presence. A significant limitation of this assay resides in the fact that only one analyte can be assessed per microplate well. Here, we describe and investigate a new technology consisting of an automated ELISA system in which up to 10 analytes can be measured within one single well, thus improving productivity, accuracy, and repeatability by reducing the amount of human labor required. Another strength of the platform is that a user can load any necessary sets/subsets of beads to perform required assays, with improved flexibility compared to manufactured-loaded arrays for multiplex analysis. We also demonstrate that this system can be used to determine the pathogenicity (i.e., presence of Shiga toxins) and serotype (i.e., Escherichia coli O157) of E. coli isolates.