Experimental Investigation of FRP-Strengthened RC Beam-Column Joints

The results of a comprehensive experimental program, aimed at providing a fundamental understanding of the behavior of shear-critical exterior reinforced concrete (RC) joints strengthened with fiber reinforced polymers (FRP) under simulated seismic load, are presented in this study. The role of various parameters on the effectiveness of FRP is examined through 2/3-scale testing of 18 exterior RC joints. Conclusions are drawn on the basis of certain load versus imposed displacement response characteristics, comprising the strength (maximum lateral load), the stiffness, and the cumulative energy dissipation capacity. The results demonstrate the important role of mechanical anchorages in limiting premature debonding, and they provide important information on the role of various parameters, including: area fraction of FRP; distribution of FRP between the beam and the column; column axial load; internal joint (steel) reinforcement; initial damage; carbon versus glass fibers; sheets versus strips; and effect of transverse beams.     

Surface triangulation for 3-D scene model construction from stereo

The construction of an accurate 3-D scene model is a fundamental aspect of any model-based image coding scheme. This article describes the generation of a triangular facet surface representation from the data acquired by a calibrated binocular (stereo) camera system     

Reconfiguration Aspects and a Reconfigurable Outer Block Interleaver for 3G Applications

Reconfiguration concept represents reconfigurable functionalities of the radio interface for mobile radio systems. Particularly for the physical layer, some possible reconfigurable architectures can be identified. We focus on outer interleaving for turbo codes, which can improve their performance in flat Rayleigh fading environment. The larger the number of columns in the outer interleaver, the better is the performance, but with the penalty of more complexity and delay. Furthermore, an incorrect choice of the number of columns can increase the bit and frame error rates. Therefore, it would be advantageous to reconfigure the outer interleaver in different operating environments with the optimum number of columns. Using two different data frame lengths, in this contribution simulation results are presented for the four possible outer block interleaver configurations specified for the 3GPP mobile standard in the case of flat Rayleigh fading channel. It is shown that different operating environments require an optimum number of columns in terms of bit error rate and frame error rate performance. Finally, frame fade duration is considered and the effect of the product of the Doppler frequency with the frame duration on the performance for the four different 3GPP outer block interleaver configurations is discussed. Costas Chaikalis was born in Athens, Greece, on March 7, 1973. He received the B.Sc. degree in electrical engineering in 1995 from Technological Educational Institute of Lamia, Greece. He also received the M.Sc. and Ph.D. degrees from Department of Electronics and Telecommunications, University of Bradford, Bradford, UK in 1999 and 2003, respectively. During his doctoral studies he worked as a Research Assistant for Mobile Virtual Center of Excellence (Mobile VCE), Terminals Group, UK. Since 2003, he is a lecturer in the Department of Electrical Engineering, Technological Educational Institute of Lamia, Greece. His research interests are in all areas of mobile communications but especially in forward error correction coding, reconfigurable (software radio) architectures, cross layer architectures and DSP applications.     

Two-degree-of-freedom output feedback controllers for discrete-time nonlinear systems

A discrete-time, model-based output feedback control structure for nonlinear processes is developed in the present work. The structure makes use of a closed-loop observer, while at the same time it guarantees that the overall feedback controller possesses integral action. An algebraic transformation is applied on the observer states to insure that the input/output gain of the observer matches the model upon which the static state feedback control law is based. The resulting control algorithm is a two-degree-of-freedom control law, in the sense that the output and the set point are processed in different ways. The control structure is shown not only to have the same properties as the standard model-state feedback structure, but also that it emerges from a model algorithmic control framework. Finally, a simulation example using an exothermic CSTR operating at an open-loop unstable steady state is used to evaluate the closed-loop performance of the proposed method.     

Microstructural changes accompanying repair welding in 5xxx aluminium alloys and their effect on the mechanical properties

At the shipyards, the aluminium alloy 5083 is welded with a multi-pass sequence using the metal inert gas technique. If, while checking the weld integrity either after welding or during service, defects are detected in the vicinity of the weldment, repairs are usually employed to extend the service life.

The repair method involves removal of the upper passes, depending on the thickness and re-welding under the same conditions.

Purpose of this paper is to examine the microstructural changes accompanying repair welding, define their effect on properties of primary importance and set, if possible, an upper limit as far as the number of repairs is concerned.     

Oxidation of oleuropein studied by EPR and spectrophotometry

The autoxidation at alkaline pH and enzymatic oxidation by mushroom tyrosinase of oleuropein, the dominant biophenol present in the fruits and leaves of Olea europea, was followed by both electron paramagnetic resonance (EPR) and absorption spectroscopy. For comparison, the same oxidation processes were applied to 4‐methylcatechol, a simple polyphenol present in olive mill wastewaters. EPR spectra of stable o‐semiquinone radicals produced during autoxidation at pH 12 and short‐lived o‐semiquinone free radicals produced during autoxidation at pH 9.0 or tyrosinase action and stabilized by chelation with a diamagnetic metal ion (Mg²⁺) were recorded for both polyphenols, and the corresponding hyperfine splitting constants were determined. The UV‐Vis spectral characteristics of the oxidation of polyphenols were highly dependent on the type of polyphenol, oxidant type and the pH of the reaction. The kinetic behavior of tyrosinase in the presence of oleuropein and 4‐methylcatechol was followed by recording spectral changes at 400 nm (absorption maximum) over time. The tysosinase activity with oleuropein showed a pronounced pH optimum at pH 6.5 and a minor one around pH 8. From the data analysis of the initial rate at pH 6.5, the kinetic parameters K_m = 0.34 ± 0.03 mM and V_max = 0.029 ± 0.002 ΔA₄₀₀ min^–1 were determined for oleuropein.     

A continuous adjoint method with objective function derivatives based on boundary integrals, for inviscid and viscous flows

A continuous adjoint formulation for inverse design problems in external aerodynamics and turbomachinery is presented. The advantage of the proposed formulation is that the objective function gradient does not depend upon the variation of field geometrical quantities, such as metrics variations in the case of structured grids. The final expression for the objective function gradient includes only boundary integrals which can readily be calculated in both structured and unstructured grids; this is feasible in design problems where the objective function is either a boundary integral (pressure deviation along the solid walls) or a field integral (the entropy generation over the flow domain). The formulation governs inviscid and viscous flows; it takes into account the streamtube thickness variation terms in quasi-3D cascade designs or rotational terms in rotating blade design problems. The application of the method is illustrated through a number of design problems concerning isolated airfoils, a 3D duct, 2D, quasi-3D and 3D, stationary and rotating turbomachinery blades.     

A Matrix–Matrix Multiplication methodology for single/multi-core architectures using SIMD

In this paper, a new methodology for speeding up Matrix–Matrix Multiplication using Single Instruction Multiple Data unit, at one and more cores having a shared cache, is presented. This methodology achieves higher execution speed than ATLAS state of the art library (speedup from 1.08 up to 3.5), by decreasing the number of instructions (load/store and arithmetic) and the data cache accesses and misses in the memory hierarchy. This is achieved by fully exploiting the software characteristics (e.g. data reuse) and hardware parameters (e.g. data caches sizes and associativities) as one problem and not separately, giving high quality solutions and a smaller search space.     

Global stability results for systems under sampled‐data control

In this work sufficient conditions for uniform input‐to‐output stability and uniform input‐to‐state stability are presented for finite‐dimensional systems under feedback control with zero‐order hold. The conditions are expressed by means of single and vector Lyapunov functions. Copyright © 2008 John Wiley & Sons, Ltd.     

Hybrid TDMA with heuristic traffic shaping: An efficient bandwidth allocation approach for heavy loaded LANs

Hybrid TDMA (Time Division Multiple Access) with heuristic traffic shaping (HyTDMA/HTS) is a new collisionless MAC protocol for efficiently managing the traffic of a heavy loaded broadcast LAN. The protocol employs techniques that enable it to perform better than both fixed assignment protocols like TDMA as well as dynamic bandwidth allocation protocols like LTDMA. HyTDMA/HTS can smoothly operate in diverse traffic environments of very high loads and bursty traffic, and it can still maintain maximum shared medium utilization while maintaining low packet delay times. Built into the protocol is also a simple yet effective heuristic mechanism that regulates the traffic of hosts flooding the network with an excessive number of packets larger than the average.