Damage evolution in polymer due to exposure to high-pressure hydrogen gas

The use of hydrogen as a fuel is increasing exponentially, and the most economical way to store and transport hydrogen for fuel use is as a high-pressure gas. Polymers are widely used for hydrogen distribution and storage systems because they are chemically inert towards hydrogen. However, when exposed to high-pressure hydrogen, some hydrogen diffuses through polymers and occupies the preexisting cavities inside the material. Upon depressurization, the hydrogen trapped inside polymer cavities can cause blistering or cracking by expanding these cavities. A continuum mechanics–based deformation model was deployed to predict the stress distribution and damage propagation while the polymer undergoes depressurization after high-pressure hydrogen exposure. The effects of cavity size, cavity location, and pressure inside the cavity on damage initiation and evolution inside the polymer were studied. The stress and damage evolution in the presence of multiple cavities was also studied, because interaction among cavities alters the damage and stress field. It was found that all these factors significantly change the stress state in the polymer, resulting in different paths for damage propagation. The effect of adding carbon black filler particles and plasticizer on the damage was also studied. It was found that damage tolerance of the polymer increases drastically with the addition of carbon black fillers, but decreases with the addition of the plasticizer.     

Structural Cues for Understanding eEF1A2 Moonlighting

Spontaneous mutations in the EEF1A2 gene cause epilepsy and severe neurological disabilities in children. The crystal structure of eEF1A2 protein purified from rabbit skeletal muscle reveals a post-translationally modified dimer that provides information about the sites of interaction with numerous binding partners, including itself, and maps these mutations onto the dimer and tetramer interfaces. The spatial locations of the side chain carboxylates of Glu301 and Glu374, to which phosphatidylethanolamine is uniquely attached via an amide bond, define the anchoring points of eEF1A2 to cellular membranes and interorganellar membrane contact sites. Additional bioinformatic and molecular modeling results provide novel structural insight into the demonstrated binding of eEF1A2 to SH3 domains, the common MAPK docking groove, filamentous actin, and phosphatidylinositol-4 kinase IIIβ. In this new light, the role of eEF1A2 as an ancient, multifaceted, and articulated G protein at the crossroads of autophagy, oncogenesis and viral replication appears very distant from the “canonical” one of delivering aminoacyl-tRNAs to the ribosome that has dominated the scene and much of the thinking for many decades.     

Crystallography of fracture facets in a near-alpha titanium alloy

A faceted initiation site is observed in Ti-6242 alloy for both the cyclic and static-loading test conditions. In this experimental study, the crystallographic orientation of the facets has been determined using the electron backscattered diffraction (EBSD) technique in conjunction with the quantitative tilt fractography in a scanning electron microscope (SEM). Quantitative tilt fractography analysis has been used to determine the spatial orientation of fracture facets. The results indicate that the normal-fatigue (no-dwell) fracture facets are oriented at ∼5 deg with respect to the basal plane; the dwell-fatigue fracture facets are oriented at ∼10 to 15 deg with respect to the basal plane and the static-loading fracture facets are oriented at ∼20 deg with respect to the basal plane. These crystallographic orientation determinations of the fracture facets at the crack-initiation site can be used to obtain an idea about the type of loading that produced them.     

The ultrasound appearances of neonatal renal vein thrombosis

Renal vein thrombosis (RVT) is the most frequently occurring vascular condition in the new-born kidney. The predisposing factors include dehydration, sepsis, birth asphyxia, maternal diabetes, polycythaemia and the presence of an indwelling umbilical venous catheter. (RVT) may present clinically with a flank mass, haematuria, hypertension or renal failure. Many imaging modalities have been employed, but ultrasound is the technique most commonly used in the evaluation of neonates with suspected RVT. Thrombosis commences in the small renal veins and subsequently propagates via larger interlobar veins to the main renal vein and inferior vena cava (IVC). The ultrasound appearances depend upon the stage at which the examination is performed and extent of the thrombus. Initially, the interlobular and interlobar thrombus appears as highly echogenic streaks. These streaks commence in a peripheral, focal segment of the involved kidney and only persist for a few days. In the first week the affected kidney swells and becomes echogenic with prominent echopoor medullary pyramids. Later, the swelling increases and the kidney becomes heterogenous with loss of corticomedullary differentiation. Grey scale ultrasound readily demonstrates thrombus within the renal vein and IVC. Adrenal haemorrhage is a recognized association and may be identified ultrasonically. Colour Doppler scanning provides additional information. In the early stages of RVT, colour Doppler may demonstrate absent intrarenal and renal venous flow. Ultimately, the kidney may recover, show focal scarring or become atrophic. Thus, ultrasound provides an accessible and reliable tool in the assessment of suspected neonatal RVT.     

Scarring trachoma is associated with polymorphism in the tumor necrosis factor alpha (TNF-alpha) gene promoter and with elevated TNF-alpha levels in tear fluid

Tumor necrosis factor alpha (TNF-alpha) may play a central role in the disease pathogenesis which occurs as a consequence of chlamydial infection. To investigate the importance of TNF-alpha gene promoter polymorphisms and TNF-alpha levels in tear fluid in scarring trachoma, a large matched-pair case-control study was performed in The Gambia. The -308A allele was present in a higher proportion of patients (28.4%) than controls (18.4%), with an increasing association for homozygotes (chi2 for trend, P = 0.032; allele frequency, 0.163 in patients and 0.099 in controls; chi2, P = 0.025). For the -238A allele, the association was similar but not significant. The disease association was highly significant when the number of either -308A or -238A sites in an individual was considered (P = 0.003). TNF-alpha promoter alleles are tightly linked to some HLA class I and II alleles, but multivariate analysis confirmed that the disease associations were independent of HLA, although a class I allele, A*6802, is also associated with disease. TNF-alpha was more frequently detected in tear samples from patients (27.6%) than from controls (15.9%), increasingly so for higher levels of detectable TNF-alpha (P = 0.015). Among patients, detectable TNF-alpha in tears was highly associated with the presence of ocular chlamydial infection (P < 0.001). The results indicate that TNF-alpha plays a major role in the tissue damage and scarring which occurs as a consequence of Chlamydia trachomatis infection.     

Microscale wear of vitrified abrasive materials

The study of bonding hard materials such as aluminium oxide and cubic boron nitride (cBN) and the nature of interfacial cohesion between these materials and glass is very important from the perspective of high precision grinding. Vitrified grinding wheels are typically used to remove large volumes of metal and to produce components with very high tolerances. It is expected that the same grinding wheel be used for both rough and finish machining operations. Therefore, the grinding wheel, and in particular its bonding system, is expected to react differently to a variety of machining operations. In order to maintain the integrity of the grinding wheel, the bonding system that is used to hold abrasive grains in place will react differently to forces that are placed on individual bonding bridges. This paper examines the role of vitrification heat treatment on the development of strength between abrasive grains and bonding bridges, and the nature of fracture and wear in vitrified grinding wheels that are used for precision grinding applications.     

Measurement of the density and surface tension of Ni-based superalloys in the liquid and mushy states

The densities of three Ni-based superalloys have been measured in both liquid and mushy states by both a modified sessile drop method (MSDM) and a modified pycnometric method (MPM) for alloys CMSX-4 and CM186LC, and for CMSX-10 alloy by MSDM only. The surface tensions of liquid CMSX-4, CM186LC, and CMSX-10 superalloys were measured using the sessile drop method. All measurements were carried out in a highly purified argon atmosphere with the oxygen partial pressure of less than 10⁻¹⁹ MPa in the gas outlet. The densities of all superalloys in both liquid and mushy states were found to decrease with increasing temperature. The volume thermal expansion of each superalloy in the mushy state was found to be higher than that in the liquid state. The densities determined by different methods have been critically assessed and recommended values in both liquid and mushy states are given as a linear function of temperature for the three Ni-based superalloys. The surface tension of liquid CMSX-4 superalloy was found to decrease with increasing temperature, while that of liquid CMSX-10 superalloy increases with increasing temperature. The wetting behavior of liquid CM186LC on the alumina substrate was found (1) to differ significantly from that of CMSX-4 and CMSX-10 and (2) to vary with time. A HfO₂-rich layer was found in the contact area of CM186LC with the alumina substrate, which could lead to some uncertainty in the value obtained for the surface tension determined for CM186LC.