Progressive NO2 Sensors with Rapid Alarm and Persistent Memory-Type Responses for Wide-Range Sensing Using Antimony Triselenide Nanoflakes

Antimony triselenide (Sb₂Se₃) nanoflake-based nitrogen dioxide (NO₂) sensors exhibit a progressive bifunctional gas-sensing performance, with a rapid alarm for hazardous highly concentrated gases, and an advanced memory-type function for low-concentration (<1 ppm) monitoring repeated under potentially fatal exposure. Rectangular and cuboid shaped Sb₂Se₃ nanoflakes, comprising van der Waals planes with large surface areas and covalent bond planes with small areas, can rapidly detect a wide range of NO₂ gas concentrations from 0.1 to 100 ppm. These Sb₂Se₃ nanoflakes are found to be suitable for physisorption-based gas sensing owing to their anisotropic quasi-2D crystal structure with extremely enlarged van der Waals planes, where they are humidity-insensitive and consequently exhibit an extremely stable baseline current. The Sb₂Se₃ nanoflake sensor exhibits a room-temperature/low-voltage operation, which is noticeable owing to its low energy consumption and rapid response even under a NO₂ gas flow of only 1 ppm. As a result, the Sb₂Se₃ nanoflake sensor is suitable for the development of a rapid alarm system. Furthermore, the persistent gas-sensing conductivity of the sensor with a slow decaying current can enable the development of a progressive memory-type sensor that retains the previous signal under irregular gas injection at low concentrations.     

The ultrasound appearances of neonatal renal vein thrombosis

Renal vein thrombosis (RVT) is the most frequently occurring vascular condition in the new-born kidney. The predisposing factors include dehydration, sepsis, birth asphyxia, maternal diabetes, polycythaemia and the presence of an indwelling umbilical venous catheter. (RVT) may present clinically with a flank mass, haematuria, hypertension or renal failure. Many imaging modalities have been employed, but ultrasound is the technique most commonly used in the evaluation of neonates with suspected RVT. Thrombosis commences in the small renal veins and subsequently propagates via larger interlobar veins to the main renal vein and inferior vena cava (IVC). The ultrasound appearances depend upon the stage at which the examination is performed and extent of the thrombus. Initially, the interlobular and interlobar thrombus appears as highly echogenic streaks. These streaks commence in a peripheral, focal segment of the involved kidney and only persist for a few days. In the first week the affected kidney swells and becomes echogenic with prominent echopoor medullary pyramids. Later, the swelling increases and the kidney becomes heterogenous with loss of corticomedullary differentiation. Grey scale ultrasound readily demonstrates thrombus within the renal vein and IVC. Adrenal haemorrhage is a recognized association and may be identified ultrasonically. Colour Doppler scanning provides additional information. In the early stages of RVT, colour Doppler may demonstrate absent intrarenal and renal venous flow. Ultimately, the kidney may recover, show focal scarring or become atrophic. Thus, ultrasound provides an accessible and reliable tool in the assessment of suspected neonatal RVT.     

Scarring trachoma is associated with polymorphism in the tumor necrosis factor alpha (TNF-alpha) gene promoter and with elevated TNF-alpha levels in tear fluid

Tumor necrosis factor alpha (TNF-alpha) may play a central role in the disease pathogenesis which occurs as a consequence of chlamydial infection. To investigate the importance of TNF-alpha gene promoter polymorphisms and TNF-alpha levels in tear fluid in scarring trachoma, a large matched-pair case-control study was performed in The Gambia. The -308A allele was present in a higher proportion of patients (28.4%) than controls (18.4%), with an increasing association for homozygotes (chi2 for trend, P = 0.032; allele frequency, 0.163 in patients and 0.099 in controls; chi2, P = 0.025). For the -238A allele, the association was similar but not significant. The disease association was highly significant when the number of either -308A or -238A sites in an individual was considered (P = 0.003). TNF-alpha promoter alleles are tightly linked to some HLA class I and II alleles, but multivariate analysis confirmed that the disease associations were independent of HLA, although a class I allele, A*6802, is also associated with disease. TNF-alpha was more frequently detected in tear samples from patients (27.6%) than from controls (15.9%), increasingly so for higher levels of detectable TNF-alpha (P = 0.015). Among patients, detectable TNF-alpha in tears was highly associated with the presence of ocular chlamydial infection (P < 0.001). The results indicate that TNF-alpha plays a major role in the tissue damage and scarring which occurs as a consequence of Chlamydia trachomatis infection.     

Flexible, dry-released process for aluminum electrostatic actuators

We present an all-aluminum MEMS process (Al-MEMS) for the fabrication of large-gap electrostatic actuators with process steps that are compatible with the future use of underlying, pre-fabricated CMOS control circuitry. The process is purely additive above the substrate as opposed to processes that depend on etching pits into the silicon, and thereby permits a high degree of design freedom. Multilayer aluminum metallization is used with organic sacrificial layers to build up the actuator structures. Oxygen-based dry etching is used to remove the sacrificial layers. While this approach has been previously used by other investigators to fabricate optical modulators and displays, the specific process presented herein has been optimized for driving mechanical actuators with relatively large travels. The process is also intended to provide flexibility for design and future enhancements. For example, the gap height between the actuator and the underlying electrode(s) can be set using an adjustable polyimide sacrificial layer and aluminum “post” deposition step. Several Al-MEMS electrostatic structures designed for use as mechanical actuators are presented as well as some measured actuation characteristics     

Slow eroding biodegradable multiblock poloxamer copolymers

Biodegradable multiblock poloxamers (BMPs) with gel duration of 8 h to several weeks were prepared by varying their molecular weights from 4000 to 40 000 g mol^?1. The molecular weight of the BMP was controlled by changing the poloxamer to coupling agent ratio. Assuming a micelle packing model of the BMP gel, as in the case of a poloxamer gel, the micelle properties and critical gel concentration of BMPs were investigated on the basis of the scaling concept. The findings suggest that the control of molecular weight by hydrolyzable groups can be a facile approach to optimize the gel properties for biomedical applications. Copyright © 2005 Society of Chemical Industry     

Design of software systems based on axiomatic design

The ability to utilize fully automated flexible manufacturing systems (FMS) or develop reliable computer-integrated manufacturing (CIM) systems will depend on our ability to develop reliable and reusable software for large complex systems on a timely basis. To date, software design has not gone very far beyond the ad hoc trial-and-error stage. Consequently, the development of software is slow, expensive, unreliable, and unmanageable. The purpose of this paper is to provide a scientific basis for designing software. The approach used here is that of axiomatic design, which is based on two design axioms: the Independence Axiom and the Information Axiom. The axiomatic approach is based on the recognition of the following common elements in design: the existence of independent domains (i.e. the consumer domain, the functional domain, the physical domain, and the process domain); the need to map between various domains during the design process; the decomposition of the characteristic vectors (i.e. functional requirements, design parameters, and process variables) in their respective domains; the zig-zagging required between the domains for decomposition; and the need to satisfy the design axioms during the design process. The axiomatic approach discussed in this paper provides decision making tools for software design in addition to systematic means of knowledge and data representation, synthesis and analysis of software, and the construction of the module-junction structure diagram.     

Reflex jaw motions and jaw stiffness pertaining to whiplash injury of the neck

Because a so-called mandibular whiplash injury requires the absence of short-latency jaw-closing reflexes in order to explain the postulated mechanism of injury (excessive jaw opening); the authors studied the presence and absence and more importantly, the kinematics (duration, displacement, velocity, acceleration) of monosynaptic and possibly, polysynaptic myotatic (stretch) reflexes in the jaw elevator muscles. In six healthy adults jaw jerk maneuvers were elicited through a brisk tap on the chin, and surface electromyography identified elevator reflexes while translational electrognathography identified the kinematics of the reflexes. The maneuvers were done while maintaining the rest position (3% MVC) and moderate clenching of the teeth (30% MVC). Electromyography was also used to identify phasic elevator excitations during a passive brisk neck extension maneuver. A sudden and unexpected elongation of the jaw elevators released autogenic reflex responses that, in conjunction with augmented tissue elasticity (stiffness), elevated the mandible into centric occlusion within approximately 150 milliseconds. In 86% of trials, the responses occurred regardless of the prevailing resting and clenching contractile activities. There was no evidence of a depressor force that consistently would and could anchor the mandible in a position of extreme or moderate depression, the theoretical linchpin of the mandibular whiplash injury. It was concluded that the mandibular locomotor system is very efficient in maintaining the rest and intercuspal positions of the mandible. This study found no evidence corroborating the mechanism claimed to release a so-called mandibular whiplash injury.