Large Area Self-Assembled Ultrathin Polyimine Nanofilms Formed at the Liquid–Liquid Interface Used for Molecular Separation

Separation membranes with higher molecular weight cut-offs are needed to separate ions and small molecules from a mixed feed. The molecular sieving phenomenon can be utilized to separate smaller species with well-defined dimensions from a mixture. Here, the formation of freestanding polyimine nanofilms with thicknesses down to ≈14 nm synthesized via self-assembly of pre-synthesized imine oligomers is reported. Nanofilms are fabricated at the water–xylene interface followed by reversible condensation of polymerization according to the Pieranski theory. Polyimine nanofilm composite membranes are made via transferring the freestanding nanofilm onto ultrafiltration supports. High water permeance of 49.5 L m^-2 h⁻¹ bar⁻¹ is achieved with a complete rejection of brilliant blue-R (BBR; molecular weight = 825 g mol⁻¹) and no more than 10% rejection of monovalent and divalent salts. However, for a mixed feed of BBR dye and monovalent salt, the salt rejection is increased to ≈18%. Membranes are also capable of separating small dyes (e.g., methyl orange; MO; molecular weight = 327 g mol⁻¹) from a mixed feed of BBR and MO. Considering a thickness of ≈14 nm and its separation efficiency, the present membrane has significance in separation processes.     

Low power and high speed design issues of CMOS Hamming code generation and error detection circuit at 22 nm and 16 nm channel length of MOS transistor

Microsystem Technologies - This paper represents low power and high speed design issues of Hamming code generation and error detection circuit using complementary metal oxide semiconductor (CMOS)...     

Assessing the sustainability of a manufacturing process using life cycle assessment technique—a case of an Indian pharmaceutical company

Clean Technologies and Environmental Policy - Manufacturing organizations are under continuous pressure to implement sustainability in their activities. There is a need to identify the...     

Transport phenomena in laser surface alloying

A three dimensional, transient model is developed for studying heat transfer, fluid flow and mass transfer for the case of a single-pass laser surface alloying process. The numerical study is performed in a co-ordinate system fixed to the laser which moves with a constant scanning speed. The coupled momentum, energy and species conservation equations are solved using a finite volume technique. Phase change processes are modelled using a fixed-grid enthalpy-porosity technique, which is capable of predicting the continuously evolving solid-liquid interface. The three-dimensional model is able to predict the species concentration distribution inside the molten pool during alloying, as well as in the entire cross section of the solidified alloy. Corresponding experimental results show a good qualitative agreement with the numerical predictions with regard to pool shape and final composition distribution.     

An extended pharmacokinetic/pharmacodynamic model describing quantitatively the influence of plasma protein binding, tissue binding, and receptor binding on the potency and time course of action of drugs

An extended pharmacokinetic/pharmacodynamic (PK/PD) model is presented, in which the effect of binding of the drug to plasma proteins and to tissue binding sites in a peripheral compartment, and nonspecific and receptor binding in the effect compartment are taken into account. It represents an extension of the classical Sheiner model, and the model proposed by Donati and Meistelman. The present model is characterized by the following parameters: Kue (exit rate constant of unbound drug from the effect compartment), Pue (ratio of the unbound clearances to and from the effect compartment), fue (fraction of drug in effect compartment that is not bound to nonspecific binding sites), Kd (equilibrium dissociation constant of drug-receptor binding), and Rtot (concentration of receptor binding sites in effect compartment). The rate of association and dissociation of the drug-receptor complex can be incorporated in the model. The influence of the pharmacokinetic parameters (V1, V2, fu, fu2, CLu10, CLu20, CLu12, CLu21) and the PK/PD model parameters (kue, Pue, fue, Kd, Rtot) on various dynamic parameters is analyzed. These include potency (single dose needed to produce 90% effect, ED90), constant infusion dosing rate needed to maintain a constant effect of 90%, time to maximum effect (onset time), and duration to 90% recovery. The neuromuscular blocking agent vecuronium is used as an example. It is shown that both potency and time course of action are strongly dependent on the ratio V1/fu, CLu10, kue, Pue (at equipotent doses the time course is not affected by Pue), fue, Kd, and Rtot (only if Rtot is high), whereas they are less affected by the ratio V2/fu2, CLu20, CLu12, and CLu21. In general, the model parameters affect the ED90 and the time course of action in the same direction, e.g., an increase of V1 results in an increase of ED90 and an increase of onset time and duration. However, the unbound clearance CLu10, the intercompartmental unbound clearance CLu12 and the receptor affinity Kd have an opposite effect on ED90 and the time course parameters, e.g., an increase of CLu10 results in an increase of ED90 and a decrease of onset time and duration. This effect may be responsible for the inverse relationship between onset time and potency of neuromuscular blocking drugs observed in animal experiments and clinical studies. We demonstrate that PK/PD analysis using the traditional effect compartment model (Sheiner model) results in an apparent value of keo, which is a function of kue, fue, Kd, Rtot, as well as the unbound drug concentration in the effect compartment Cue. On the other hand, the model proposed by Donati and Meistelman gives correct values of keo (equal to the product fue.kue), but the receptor affinity Kd and the receptor density Rtot obtained by this method are apparent values, which depend on fu, fue, and Pue.     

Non-Hodgkin lymphoma of the central skull base: MR manifestations

OBJECTIVE: The aim of this study was to demonstrate the MR characteristics of non-Hodgkin lymphoma of the skull base to help in the differential diagnosis of this neoplasm from other conditions. MATERIALS AND METHODS: MR of five patients, 7-64 years old, with pathologically proved lymphomas of the skull base were reviewed. Three cases had primary skull base lesions involving the sphenoid bone and the cavernous sinus. One case with a nasal cavity lesion involving the skull base and one with a relapsing skull base lesion of previously treated tonsillar lymphoma were included. RESULTS: The lesions had signal intensities that were similar to that of gray matter of brain on both T1- and T2-weighted imaging. Bilateral cavernous sinuses were involved with encasement of internal carotid arteries in every case. Postcontrast MR showed homogeneous enhancement of the tumor with dural infiltration along the planum sphenoidale, clivus, or tentorium. The clivus was destroyed or replaced by tumors in adult cases but in two children the clivus was preserved with intact sphenooccipital synchondrosis. In one case the tumor extended to the extracranial portion through the jugular foramen. CONCLUSION: The MR findings of a permeative lesion of the skull base, invasion of the cavernous sinus without arterial narrowing, infiltration along the dural surface, and an iso- or hypointensity with brain on T2-weighted imaging should suggest lymphoma.     

Live animal performance, carcass traits, and meat palatability of calf- and yearling-fed cloned steers

Two groups of Brangus steers produced by nuclear transplantation cloning were used in parallel studies investigating the impact of calf- and yearling-feeding. The first group (n = 8) were fed as calves (CF; n = 4) or yearlings (YF; n = 4) to a constant age end point of 16 mo. The second group (n = 10) were fed as calves (CF; n = 5) or yearlings (YF; n = 5) to a constant live weight end point (530 kg). When slaughtered at the same age, CF and YF steers did not differ (P > .05) in feedlot ADG, but the CF steers were heavier and had higher dressing percentages, numeric yield grades, and quality grades (P < .05). Top loin steaks from the groups of steers did not differ (P > .05) in palatability traits. When fed to a constant live weight, the YF steers gained more rapidly (P < .05) and had lower (P < .05) numeric yield grades than did CF steers. Again CF steers had higher (P < .05) dressing percentages. There was no difference (P > .05) between the treatments in carcass quality grade or meat palatability characteristics. Thus, when finished to a constant weight end point, YF steers gained more rapidly, with no adverse effects on carcass quality grade or palatability traits; however, CF steers consistently produced higher dressing percentages, largely due to greater external fatness.     

Identification of glycoprotein 330 as an endocytic receptor for apolipoprotein J/clusterin

Glycoprotein 330 (gp330) is a member of a family of endocytic receptors related to the low density lipoprotein receptor. gp330 has previously been shown to bind a number of ligands in common with its family member, the low density lipoprotein receptor-related protein (LRP). To identify ligands specific for gp330 and relevant to its localization on epithelia such as in the mammary gland, gp330-Sepharose affinity chromatography was performed. As a result, a 70-kDa protein was selected from human milk and identified by protein sequencing to be apolipoprotein J/clusterin (apoJ). Solid-phase binding assays confirmed that gp330 bound to apoJ with high affinity (Kd = 14.2 nM). Similarly, gp330 bound to apoJ transferred to nitrocellulose after SDS-polyacrylamide gel electrophoresis. LRP, however, showed no binding to apoJ in either type of assay. The binding of gp330 to apoJ could be competitively inhibited with excess apoJ as well as with the gp330 ligands apolipoprotein E, lipoprotein lipase, and the receptor-associated protein, a 39-kDa protein that acts to antagonize binding of all known ligands for gp330 and LRP. Several cultured cell lines that express gp330 and ones that do not express the receptor were examined for their ability to bind and internalize 125I-apoJ. Only cells that expressed gp330 endocytosed and degraded radiolabeled apoJ. Furthermore, F9 cells treated with retinoic acid and dibutyryl cyclic AMP to increase expression levels of gp330 displayed an increased capacity to internalize and degrade apoJ. Cellular internalization and degradation of radiolabeled apoJ could be inhibited with unlabeled apoJ, receptor-associated protein, and gp330 antibodies. The results indicate that gp330 but not LRP can bind to apoJ in vitro and that gp330 expressed by cells can mediate apoJ endocytosis leading to lysosomal degradation.     

Microbiological safety of kinema, a fermented soya bean food

Kinema is a fermented soya bean food of Nepal and the hilly regions of North-eastern States of India. Generally, the fermentation is dominated by Bacillus spp. that often cause alkalinity and desirable stickiness in the product. The present study was undertaken in a limited number of commercial (market) kinema samples to test for the presence of foodborne pathogens and their properties. Bacillus cereus was present in numbers exceeding 10⁴ cfu/g product in five of the tested 15 market samples. Enterobacteriaceae and coliform bacteria exceeded 10⁵ cfu/g in 10 of the 15 samples. Escherichia coli exceeding 10⁵ cfu/g was found in two samples. Staphylococcus aureus was not detected in any of the tested samples. Of 31 isolated typical and atypical strains of B. cereus, 18 representative strains were tested qualitatively for the ability to produce diarrhoeal type enterotoxin (BCET) using an Oxoid BCET-RPLA test kit. Overall, BCET was formed by 12 strains in BHIG (brain heart infusion broth +1% glucose), by seven strains on sterilized cooked rice, and by five strains on sterilized cooked soya beans. Semi-quantitative tests on BCET revealed that levels exceeding 256 ng/g soya beans, produced by single pure culture inoculation with the isolated B. cereus strains, were reduced to ≤ 8 ng/g by frying kinema in oil, a common procedure when making kinema curry. It was also shown in a mixed pure culture experiment that a kinema strain B. Subtilis DK-W1, is able to suppress growth and BCET formation by a selected toxin producing strain (BC7-5) of B. cereus. It is concluded that the traditional way of making kinema and its culinary use in curries is safe. However, for novel applications of kinema, safety precautions are advisable.