Monolithically-integrated BiVO4/p+-n GaAs1-xPx tandem photoanodes capable of unassisted solar water splitting

Monolithically-integrated tandem photoanodes were fabricated on substrates consisting of epitaxial n-GaAs_1-xP_x (x ? 0.32) grown on n⁺-GaAs wafers. A p⁺-n junction photovoltaic (PV) cell was first formed by zinc diffusion into the n-GaAs_0.68P_0.32 from a deposited ZnO coating. After diffusion the ZnO serves as a transparent electrical contact to the resulting p⁺-GaAs_0.68P_0.32 surface layer. Transparent, conducting SnO₂:F provides chemical and mechanical protection for the ZnO and the underlying PV cell, and it electrically connects this cell to a top BiVO₄ photocatalyst layer. In some photoanodes, a WO₃ thin film was interposed between the SnO₂:F and BiVO₄. All oxide coatings were produced by ultrasonic spray pyrolysis except WO₃, which was spin coated. Unassisted (unbiased) solar water splitting was achieved, with a solar-to-hydrogen efficiency approaching 2%, without addition of any co-catalyst to the BiVO₄ surface. This work can provide insights to other researchers regarding scalable, low cost approaches for the planar monolithic integration of oxide photoanode materials with PV cells to create new tandem devices.     

Live animal performance, carcass traits, and meat palatability of calf- and yearling-fed cloned steers

Two groups of Brangus steers produced by nuclear transplantation cloning were used in parallel studies investigating the impact of calf- and yearling-feeding. The first group (n = 8) were fed as calves (CF; n = 4) or yearlings (YF; n = 4) to a constant age end point of 16 mo. The second group (n = 10) were fed as calves (CF; n = 5) or yearlings (YF; n = 5) to a constant live weight end point (530 kg). When slaughtered at the same age, CF and YF steers did not differ (P > .05) in feedlot ADG, but the CF steers were heavier and had higher dressing percentages, numeric yield grades, and quality grades (P < .05). Top loin steaks from the groups of steers did not differ (P > .05) in palatability traits. When fed to a constant live weight, the YF steers gained more rapidly (P < .05) and had lower (P < .05) numeric yield grades than did CF steers. Again CF steers had higher (P < .05) dressing percentages. There was no difference (P > .05) between the treatments in carcass quality grade or meat palatability characteristics. Thus, when finished to a constant weight end point, YF steers gained more rapidly, with no adverse effects on carcass quality grade or palatability traits; however, CF steers consistently produced higher dressing percentages, largely due to greater external fatness.     

The pharmacokinetics and protein-binding of fusidic acid in patients with severe renal failure requiring either haemodialysis or continuous ambulatory peritoneal dialysis

Antibiotic treatment options for Burkholderia cepacia infection are limited because of high intrinsic resistance. The problem is complicated by development of cross-resistance between antibiotics of different classes. We isolated antibiotic-resistant mutants by stepwise exposure to chloramphenicol (Chlor) and to trimethoprim/sulphamethoxazole (T/S) for four B. cepacia strains: ATCC13945, Per (clinical isolate), Cas and D4 (environmental isolates). Chlor(r) mutants did not produce chloramphenicol acetyl-transferase. Cross-resistance, defined as greater than four-fold increase in MIC by microtitre dilution method, was consistently seen in both types of mutants. For chloramphenicol-resistant (Chlor[r]) and trimethoprim/sulphamethoxazole-resistant (Tr/Sr) mutants of B. cepacia ATCC13945 and Cas, no MIC change was seen for piperacillin, ceftazidime, rifampicin, gentamicin, tobramycin, polymyxin B or azithromycin. B. cepacia-Per and -D4 mutants showed cross-resistance to ceftazidime and to piperacillin. Comparison of outer membrane protein (OMP) profiles of B. cepacia and their mutants by SDS-PAGE revealed Tr/Sr) mutants to be deficient in a major OMP (molecular weight 39-47 kDa). Tr/Sr mutants also expressed additional OMPs not found in wild type strains at 75-77 kDa for B. cepacia-ATCC13945 and -Cas, and 20-21 kDa in B. cepacia-D4 and -Per. No OMP changes occurred in Chlor(r) mutants. Lipopolysaccharide (LPS) profiles of each type of mutant showed new high and low molecular weight LPS bands. Cross-resistance seems to be mediated by alterations in porin and LPS for Tr/Sr mutants, but only by LPS in Chlor(r) mutants.     

The rationale for cementless total hip replacement

Current cementing techniques of distal plugging, pulsatile water cleaning of the canal, and retrograde filling with PMMA in a low-viscous state prepared using porosity reduction techniques and then pressurized have been shown to give excellent results at 10 or more years after operation. However, physical and aging characteristics of PMMA do not guarantee that those results will hold up in the 20- to 30-year time frame. Fifteen-year experience with bony ingrowth systems indicate the development of a durable interface without PMMA, although the interface does appear more vulnerable to attack by the biologic reaction to HMWPE debris. Bone remodeling appears more favorable around proximally fixed bone ingrowth prostheses than around distally fixed prostheses. Softening of the physical characteristics of the stem tip may reduce the incidence of thigh pain. Patients with high activity potential and a life expectancy of greater than 25 years should be strongly considered for a proximally fixed bone ingrowth or ongrowth prosthesis.     

Determination of total non-sulphonated aromatic amines in tartrazine, sunset yellow FCF and allura red by reduction and derivatization followed by high-performance liquid chromatography.

Free and bound non-sulphonated aromatic amines (NSAA) are determined in the food colours tartrazine, sunset yellow FCF and allura red. After reduction of the bound amines with sodium dithionite, the NSAA are extracted into chloroform, then transferred to aqueous acid solution, diazotized with sodium nitrite and coupled with 2-naphthol-3,6-disulphonic acid, disodium salt (R-salt). Reversed-phase ion-pair liquid chromatography and an absorbance detector at 512 nm are used to analyse the coloured derivatives. Samples of dyes were spiked with known amounts of aniline, 1-naphthylamine, 2- and 4-aminobiphenyl, 4-aminoazobenzene, benzidine, p-cresidine or 4-nitro-p-cresidine bound to R-salt. Recoveries averaged 90% in tartrazine, 65% in sunset yellow FCF and 71% in allura red. Detection limits ranged between 2 and 32 ng/g. A survey of 24 commercial samples revealed levels up to 520 micrograms/g total NSAA. The majority of NSAA are bound to the coupling compound during the manufacturing process and less than 7% remain as free amines in the dye.     

Salt-water up-coning during extraction of fresh water from a tropical island

Rainwater can collect in a lens-shaped region within the rock of a tropical island, and may be separated from the underlying salt water by a sharp interface. This paper presents a nonlinear theory for determining the shape of this interface. The island is assumed to be saturated with rain, and provision is made for the outflow of rain-water through the sides of the island. The effect of a bore well on the shape of the interface is investigated, and the problem is solved using a spectral method. An integral-equation method is also presented for the case when the island has infinite width.     

Implementation of a mechanics-based system for estimating the strength of timber

The most accurate way of determining the strength of lumber requires destructive testing. An intelligent mechanics-based lumber-grading system was developed to provide a better estimation of the strength of a board nondestructively. This system processed X-ray-extracted geometric features (of 1080 boards that eventually underwent destructive strength testing) by using finite element methods to generate associated stress fields. The stress fields were then fed to a feature-extracting-processor, which produced 26 strength predicting features. The best strength predicting features were determined from the coefficient of determination (correlation r/sup 2/) between the features and actual strengths of the boards. The coefficients of determination of each feature (or combination of features), with the actual strength of the board, were calculated and compared. A coefficient of determination of 0.4158 was achieved by using a longitudinal (along the local grain angle) maximum stress concentration (MSC) feature to predict the estimated strength of lumber.