Decorating surface charge of graphite nanoplate using an electrostatic coupling agent for 3-dimensional polymer nanocomposite

Here, we report a facile approach to electrostatically couple the surface charges of graphite nanoplate (GNP) fillers and poly(methyl methacrylate) (PMMA) polymer particles using ethylene maleic anhydride (EMA) copolymer as an electrostatic coupling agent. Our strategy involved switching the intrinsic repulsive electrostatic interactions between the directly exfoliated GNPs fillers and the PMMA particles to attractive electrostatic surface interactions for preparing core(PMMA)-shell (GNP) precursor in order to optimizing 3-dimensionally dispersed polymer nanocomposite. As a result, the electrical conductivity of the composites dramatically increased by a factor of 16.7 in the EMA-coupled GNP/PMMA composites compared with that of the EMA-free GNP/PMMA composites. In addition, the percolation threshold was also notably reduced from 0.32 to 0.159 vol% after electrostatic coupling of the GNPs fillers and PMMA particles. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48390.     

A New Approach for Built‐in Self‐Test of 4.5 to 5.5 GHz Low‐Noise Amplifiers

This paper presents a low‐cost RF parameter estimation technique using a new RF built‐in self‐test (BIST) circuit and efficient DC measurement for 4.5 to 5.5 GHz low noise amplifiers (LNAs). The BIST circuit measures gain, noise figure, input impedance, and input return loss for an LNA. The BIST circuit is designed using 0.18 μm SiGe technology. The test technique utilizes input impedance matching and output DC voltage measurements. The technique is simple and inexpensive.     

Live animal performance, carcass traits, and meat palatability of calf- and yearling-fed cloned steers

Two groups of Brangus steers produced by nuclear transplantation cloning were used in parallel studies investigating the impact of calf- and yearling-feeding. The first group (n = 8) were fed as calves (CF; n = 4) or yearlings (YF; n = 4) to a constant age end point of 16 mo. The second group (n = 10) were fed as calves (CF; n = 5) or yearlings (YF; n = 5) to a constant live weight end point (530 kg). When slaughtered at the same age, CF and YF steers did not differ (P > .05) in feedlot ADG, but the CF steers were heavier and had higher dressing percentages, numeric yield grades, and quality grades (P < .05). Top loin steaks from the groups of steers did not differ (P > .05) in palatability traits. When fed to a constant live weight, the YF steers gained more rapidly (P < .05) and had lower (P < .05) numeric yield grades than did CF steers. Again CF steers had higher (P < .05) dressing percentages. There was no difference (P > .05) between the treatments in carcass quality grade or meat palatability characteristics. Thus, when finished to a constant weight end point, YF steers gained more rapidly, with no adverse effects on carcass quality grade or palatability traits; however, CF steers consistently produced higher dressing percentages, largely due to greater external fatness.     

The pharmacokinetics and protein-binding of fusidic acid in patients with severe renal failure requiring either haemodialysis or continuous ambulatory peritoneal dialysis

Antibiotic treatment options for Burkholderia cepacia infection are limited because of high intrinsic resistance. The problem is complicated by development of cross-resistance between antibiotics of different classes. We isolated antibiotic-resistant mutants by stepwise exposure to chloramphenicol (Chlor) and to trimethoprim/sulphamethoxazole (T/S) for four B. cepacia strains: ATCC13945, Per (clinical isolate), Cas and D4 (environmental isolates). Chlor(r) mutants did not produce chloramphenicol acetyl-transferase. Cross-resistance, defined as greater than four-fold increase in MIC by microtitre dilution method, was consistently seen in both types of mutants. For chloramphenicol-resistant (Chlor[r]) and trimethoprim/sulphamethoxazole-resistant (Tr/Sr) mutants of B. cepacia ATCC13945 and Cas, no MIC change was seen for piperacillin, ceftazidime, rifampicin, gentamicin, tobramycin, polymyxin B or azithromycin. B. cepacia-Per and -D4 mutants showed cross-resistance to ceftazidime and to piperacillin. Comparison of outer membrane protein (OMP) profiles of B. cepacia and their mutants by SDS-PAGE revealed Tr/Sr) mutants to be deficient in a major OMP (molecular weight 39-47 kDa). Tr/Sr mutants also expressed additional OMPs not found in wild type strains at 75-77 kDa for B. cepacia-ATCC13945 and -Cas, and 20-21 kDa in B. cepacia-D4 and -Per. No OMP changes occurred in Chlor(r) mutants. Lipopolysaccharide (LPS) profiles of each type of mutant showed new high and low molecular weight LPS bands. Cross-resistance seems to be mediated by alterations in porin and LPS for Tr/Sr mutants, but only by LPS in Chlor(r) mutants.     

The rationale for cementless total hip replacement

Current cementing techniques of distal plugging, pulsatile water cleaning of the canal, and retrograde filling with PMMA in a low-viscous state prepared using porosity reduction techniques and then pressurized have been shown to give excellent results at 10 or more years after operation. However, physical and aging characteristics of PMMA do not guarantee that those results will hold up in the 20- to 30-year time frame. Fifteen-year experience with bony ingrowth systems indicate the development of a durable interface without PMMA, although the interface does appear more vulnerable to attack by the biologic reaction to HMWPE debris. Bone remodeling appears more favorable around proximally fixed bone ingrowth prostheses than around distally fixed prostheses. Softening of the physical characteristics of the stem tip may reduce the incidence of thigh pain. Patients with high activity potential and a life expectancy of greater than 25 years should be strongly considered for a proximally fixed bone ingrowth or ongrowth prosthesis.     

Evaluation of Monkman-Grant parameters for type 316LN and modified 9Cr-Mo stainless steels

The Monkman-Grant (M-G) and its modified parameters were evaluated for type 316LN and modified 9Cr-Mo stainless steels prepared with minor element variations. Several sets of creep data for the two alloy systems were obtained by constant-load creep tests in 550-650°C temperature range. The M-G parameters,m, m’,C, andC’ were proposed and discussed for the two alloy systems. Them value of the M-G relation was 0.90 in type 316LN steel and 0.84 in modified 9Cr-Mo steel. Them’, value of the modified relation was 0.94 in type 316LN steel and 0.89 in 9Cr-Mo steel. Although creep fracture modes and creep properties between type 316LN and modified 9Cr-Mo steels showed a basic difference, the M-G and its modified relations demonstrated linearity quite well. Them’ of modified relation almost overlapped regardless of the creep testing conditions and chemical variations in the two alloy systems, and the parameterm’ was closer to unity than that of the M-G relation.