Adaptive viewpoints for co-browsing on heterogeneous devices

Co-browsing is an activity in which a group of users navigate their way through of a set of Web pages together for a shared purpose. Effective co-browsing among users with different device capabilities requires a shared understanding of those Web pages. This paper demonstrates the concept of shared viewpoints (SVPs), and personal viewpoints (PVPs), for co-browsing, before detailing a framework for implementing these concepts. Finally, the effectiveness of the framework is presented through a perceptual experiment.     

InP D-HBT ICs for 40-Gb/s and higher bitrate lightwave transceivers

The combination of device speed (f/sub T/, f/sub max/ > 150 GHz) and breakdown voltage (V/sub bceo/ > 8 V) makes the double heterojunction bipolar InP-based transistor (D-HBT) an attractive technology to implement the most demanding analog functions of 40-Gb/s transceivers. This is illustrated by the performance of a number of analog circuits realized in an InP D-HBT technology with an 1.2- or 1.6-/spl mu/m-wide emitter finger: a low phase noise push-push voltage-controlled oscillator with -7-dBm output power at 146 GHz, a 40-GHz bandwidth and low-jitter 40-Gb/s limiting amplifier, a lumped 40-Gb/s limiting driver amplifier with 4.5-V/sub pp/ differential output swing, a distributed 40-Gb/s driver amplifier with 6-V/sub pp/ differential output swing, and a number of distributed preamplifiers with up to 1.3-THz gain-bandwidth product.     

New encapsulation development for fine pitch IC devices

The continuous reduction of chip size driven by the market demand has a significant impact on circuit design and assembly process of IC packages. Shrinking chip size and increasing I/O counts require finer bond pad pitch and bond pad size for circuitry layout. As a result, serious wire deflection during transfer molding process could make adjacent wires short, and this issue becomes more critical as a smaller wire diameter has to be applied for the finer pitch wire bonded IC devices.This paper presents a new encapsulation process development for 50 μm fine pitch plastic ball grid array package. Since reduced wire diameter decreases the bending strength of bonded wires significantly, wire deflection during molding process becomes quite serious and critical. Experiments on conventional transfer molding were conducted to evaluate wire span threshold with 23.0 μm diameter gold wire. The results show that the wire span threshold is about 4.1 mm, which is much shorter than the wire span threshold of over 5.0 mm for wire with 25.4 μm diameter. Finite element analysis shows there is a significant difference in the wire deflection between 23.0 μm gold wire and 25.4 μm gold wire diameter under the same action of mold flow. A novel encapsulation method is introduced using non-sweep solution. The wire span could be extended to over 5.0 mm with wire sweep less than 1%. Reliability tests conducted showed that all the units passed 1000 temperature cycles (−55 to 125 °C) with JEDEC moisture sensitivity level 2a (60 °C/60% relative humidity for 120 h) and 3 times reflow (peak temperature at 220–225 °C). It is believed that this solution could efficiently overcome the risk of wire short issues and improve the yield of ultra fine pitch wire bonds in high-volume production.     

The sleeping dragon: Wind energy in the Asia-Pacific region

The Asia-Pacific region is one of the fastest growing regional economies in the world today. The region is home to over half of the global population and is one of the most important markets for multinational corporations to penetrate. The wind power sector is no exception. Wind resources remain untapped and the demand for electricity continues to grow as a result of expanding and modernizing economies. Godfrey Chua, Emerging Energy Research USA reports on the current status and development of the wind industry in the region.     

The glass fibre-polymer interface: II—Work of fracture and shear stresses

Pull-out experiments have been carried out on single production fibres under carefully controlled conditions. Four parameters were determined. The interfacial yield stresses, of about 9–14 MPa, were very much smaller than the shear strengths of the bulk polymers in the case of an epoxy, whether post-cured or not, and a non-post-cured polyester. Values for the work of fracture of the interface varied from 140 to 300 Jm^?2, and again were less than those of the polymer. Interface failure sometimes took place in the epoxy rather than at the fibre surface, whereas with the polyester it always took place at the fibre surface. After interface failure, pull-out was governed by friction, with maximum shear stresses of 7–10 MPa for polyester, and 21–34 MPa for epoxy, the higher values being obtained for the post-cured resins. Average frictional shear stresses were sometimes less than a half of the maximum shear stress, indicating that the fibre Poisson's shrinkage was playing an important role in the pull-out process. A silicone release agent reduced the frictional shear stresses to 2·5 MPa, with both resins.     

Increased expression of peripheral benzodiazepine receptors in the facial nucleus following motor neuron axotomy

Peripheral benzodiazepine receptors (PBRs) are expressed in a variety of tissues but are normally found at low levels in the brain. Following various types of nerve injury, a reactive gliosis results that exhibits a high expression of this receptor. To further characterize the expression of PBRs following neuronal injury, we evaluated PBR expression in the facial nucleus following facial nerve axotomy (FNA). Injury to a peripheral nerve results in a complex series of metabolic and morphological changes around the injured neuron. Transections of the facial nerve results in a rapid activation of both astrocytes and microglia around axotomized motor neurons. FNA resulted in an increase in the staining for both astrocytes (glial fibrillary acidic protein) and activated microglia (OX42). There was also a reduction in synaptic contacts with the motor nucleus as evidenced by reduced staining for the synaptic marker, synaptophysin. In sections labeled with [3H]-PK11195, the subsequent autoradiograms displayed marked increases in the labeling for PBRs. This increase was observed at 5, 7 and 10 days after nerve transection. The increase was primarily in the level of expression (Bmax), with no change in the affinity of the ligand (Kd). The increase in PBR expression after FNA supports the hypothesis that PBRs can be used as a sensitive marker for CNS injury.     

Aesthetic outcome of breast implant removal in 85 consecutive patients

As we began to see increasing numbers of women concerned about their gel-filled breast implants, we became aware that we could not advise them with any degree of confidence what they might expect in terms of aesthetic result after implant removal. We decided to review the records and outcomes over a 2-year period of a number of patients who underwent implant removal. Eighty-five consecutive patients were reviewed, 69 of whom had undergone cosmetic augmentation and 16 of whom had breast reconstruction with silicone gel implant(s). Thirty-nine of the 69 cosmetic augmentation patients had removal of implants alone, and 27 had removal accompanied by mastopexy. Three had reaugmentation with saline-filled implants; one had replacement with saline-filled implants. Fifteen of the 16 reconstruction patients underwent autogenous tissue transfer. Preoperative and postoperative photographs of all patients were mixed randomly and rated by two independent raters in four aesthetic categories on a five-point scoring system. Repeatability was measured several weeks later, when each rater scored randomly selected photographs from this patient pool. The patients also performed their own outcome evaluations by means of questionnaire. We discovered that cosmetic augmentation patients who undergo implant removal only often suffer adverse aesthetic results. The postremoval appearance of many cosmetic augmentation patients actually will be improved over their preoperative appearance when mastopexy is performed in conjunction with implant removal. The study demonstrated that patients with certain body types could expect a particular outcome; i.e., women with asthenic builds and older patients with lax, striated breast skin generally had unsatisfactory aesthetic outcomes with implant removal only. Patients selected for autogenous breast reconstruction had favorable results, with extended latissimus dorsi and TRAM flaps yielding equally good outcomes. The study allows us to offer patients an optimistic view of postoperative results following breast implant removal. We have begun to advise selected patients that implant removal accompanied by mastopexy provides a more pleasing aesthetic outcome than implant removal alone.     

Experimental and theoretical comparison of NIR spectroscopy measurements of cerebral hemoglobin changes

Two near-infrared spectroscopy (NIRS) methods are available for measuring changes (Delta) in total cerebral hemoglobin concentration (CHC): 1) a continuous measurement of the changes in total hemoglobin concentration (Delta[Hb]tot) and 2) the difference between two absolute measurements of CHC, each derived from a small, controlled change in inspired O2 fraction. This paper investigates the internal consistency of these two methods by using an experimental and theoretical comparison. NIRS was used to measure [Hb]tot in five newborn piglets before and after a change in arterial PCO2. Delta[Hb]tot demonstrated a low coefficient of variation of 2.8 +/- 2.8 (SD) % which allowed changes in CO2-cerebral blood volume reactivity to be clearly discriminated. However, a high coefficient of variation of 22.8 +/- 3.5% on the DeltaCHC measurements obscured any CO2 reactivity changes. A theoretical analysis demonstrates the effects of optical pathlength, background absorption, scatter, and blood vessel diameter on both methods. For more accurate monitoring of CHC, individual measurements of optical pathlength and more accurate pulse oximetry are required.