可重定位的基于事务的系统级验证

功能验证已经成为开发SoC的主要问题。随着一些复杂SoC的规模超过两千万门，以及对开发和集成嵌入式软件的需求持续增加，软件模拟器已经力所不及。在设计过程需要几百万个时钟周期来充分测试和验证软件功能的情况下，软件仿真器的性能下降到1-5Hz。按照这种速率，软件调试需要几年的时     

Overnight closed suction drainage after axillary lymphadenectomy for breast cancer

Axillary lymphadenectomy in breast conservation surgery is associated with substantial morbidity in either seroma formation or infection. Seroma formation in the axilla requiring aspiration occurs in up to 42 per cent of patients treated without drainage. Prolonged outpatient suction drainage reduces but does not eliminate the incidence of seroma formation, while increasing cost, discomfort, and possibly infection rates. We studied the efficacy of overnight closed suction drainage in patients undergoing breast conservation surgery. Fifty consecutive patients undergoing a standard axillary dissection for breast cancer were studied. The axilla was drained with a 7-French closed suction drain. All drains were removed within 23 hours of surgery and prior to discharge from the outpatient surgical center. Patients were examined by the operating surgeon 7 to 10 days after surgery. One patient (2%) experienced a seroma postoperatively. No infections were observed in all 50 patients, and the remaining 49 patients did not experience visible or symptomatic seromas. The number of lymph nodes removed ranged between 5 and 33 with a mean of 15.5 +/- 0.6. Nine out of 50 (18%) patients had metastatic breast cancer to the axillary lymph nodes. Patients undergoing breast conservation surgery benefit from overnight closed suction drainage of the axilla. This short-term method reduces the incidence and the inherent morbidity of axillary seroma formation.     

Coronary bypass in vascular patients: a relatively high-risk procedure

A premise of cardiac risk stratification is that the added risk of coronary artery bypass grafting (CABG) is offset by the improved safety of subsequent vascular reconstruction (VR). We questioned if elective CABG is patients with severe peripheral vascular disease (PVD) is a relatively high-risk procedure. A cohort study of 680 elective CABG patients from January 1993 to December 1994 was performed using three mutually exclusive outcomes of complication-free survival, morbidity, and mortality. Patient characteristic, operative, and outcome data were prospectively collected. Retrospective review determined that 58 patients had either a standard indication for or a history of VR. Overall CABG mortality was 2.5%, with statistically similar but relatively higher rates for PVD as compared to non-PVD patients. In contrast, major morbidity occurred at rates 3.6-fold higher in PVD patients (39.7%) than in disease-free patients (16.7%) after adjustment for the effects of patient and operative variables (odds ratio [OR] 3.67, 95% confidence interval [CI] 1.93-6.99). CABG morbidity in the PVD patient was most likely in those patients with aortoiliac (OR 9.51, CI 3.20-28.27) and aortic aneurysmal (OR 5.24, CI 1.28-21.41) disease types. CABG in PVD patients is associated with significant major morbidity. Such morbidity may preclude or alter the timing of subsequent VR.     

International Working Group on Assurance Cases (for Security)

Critical systems are aptly named - from electric power to water and gas to the telephone system and the Internet, they're all critical to some aspect of our daily lives. We're a networked society and as such, it's important to both know whether critical systems are trustworthy and be able to communicate, review, and debate the level of trust achieved in them. In the safety domain, explicit safety cases are increasingly required by law, regulations, and standards. In this article, we outline what a small, international group of experts, spanning various disciplines in safety, security, reliability, and critical infrastructure, been doing with the International Working Group on Assurance Cases (for Security), what we hope to achieve, and where we go next.     

Properties of nanoporous organosilicate hybrid thin films with a bimodal pore size distribution

Low dielectric poly[methylsilsesquioxane‐ran‐trifluoropropylsilsesquioxane‐ran‐(2,4,6,8‐tetramethyl‐2,4,6,8‐tetraethylenecyclotetrasiloxane)silsesquioxane]s {P[M‐ran‐TFP‐ran‐(TCS)]SSQs} having various compositions were synthesized using trifluoropropyl trimethoxysilane, methyl trimethoxysilane and 2,4,6,8‐tetramethyl‐2,4,6,8‐tetra(trimethoxysilylethyl)cyclotetrasiloxane. The chemical composition of the polymers and the content of SiOH end‐groups were controlled by adjusting the reaction conditions, and they were characterized by ¹H‐NMR. The thermally decomposable trifluoropropyl groups on the P[M‐ran‐TFP‐ran‐(TCS)]SSQ backbone and heptakis(2,3,6‐tri‐O‐methyl)‐β‐cyclodextrin (CD) were employed as pore generators. The dielectric constants of the porous CD/P[M‐ran‐TFP‐ran‐(TCS)]SSQ films were in the range 2.0–2.7 (at 100 kHz) depending on the concentration of the porogens, and showed no change over 4 days under aqueous conditions. The pore size of the films showed a bimodal distribution, with diameters of ca 0.5–1.0 nm for those originating from the trifluoropropyl groups and 1.7 nm from the CD. The elastic modulus and hardness of the 30 vol% CD‐blended film with a dielectric constant of 2.26 were 2.40 and 0.38 GPa, respectively, as determined by a nanoindenter. Copyright © 2005 Society of Chemical Industry     

The Effect of Moisture Content in Epoxy Film Adhesives on their Performance. II. T-Peel and 105°C Lap Shear Strength

The benefits of adhesively bonded structures are well known. However, the most significant factor limiting the extensive application of metal bonding in primary aerospace structures is the prevailing lack of confidence in its long term durability under hostile environmental conditions.^1,2     

Single-Phase Permanent-Magnet Motor Analysis

A unified theoretical approach is presented for the calculation of the performance of the single-phase capacitor-start permanent-magnet (PM) ac line-start motor. The earlier work of Chang and of Finch and Lawrenson on capacitor reluctance motors is extended. As far as possible, a common set of reference frame transformations for steady-state, transient, and asynchronous performance is also provided, permitting the use of all the theory developed for the analysis of the balanced polyphase PM motor. A new approximate technique is given for estimating the average asynchronous torque/speed curve from computed acceleration curves.