EFFECTS OF ASYMMETRIC TEMPERATURE PROFILES ON THERMAL CONVECTION DURING PHYSICAL VAPOR TRANSPORT OF Hg2Cl2

Asymmetric horizontal thermal profiles can change the flow field structure in the physical vapor transport (PVT)of Hg₂Cl₂. It is found that for the ratios of horizontal to vertical thermal Rayleigh numbers Ra_H/Ra ≥ 1·5, the convetive flow structure changes from multicellular to unicellular for the base parametric state of Ra = 2·79 × 10⁴, Pr = 0·91, Le=l·01. Pe = 4·60, Ar= 0·2 and C_r = 1·01. The unicellular flow structure obtained by increasing ∇*_H(Ra_H) is not likely to support the conjecture of the presence of unicellular convective mode in the laser Doppler velocimetry (LDV) experiments for PVT process of Hg₂Cl₂ (Kim el al., 1996). When the six parameters of Ra, Pr, Le, Pe, Ar and C_r are fixed, the dimensional maximum magnitude of the velocity vector |U|_max is proportional to √∇T*_H.     

Decomposition de l'acetylene,de l'ethylene et du benzene sur le carbone aux tres hautes temperatures et sous de basses pressions

At high temperatures (1000–2000°C) and low pressures (10^?5?10^?2 Torr) ethylene, acetylene and benzene decompose helerogeneously on pyrolytic carbon giving mainly hydrogen and deposited carbon, with collision yields of the order of 10^?4. The kinetics of these carbon deposition reactions show some striking similarities with carbon removal reactions by oxygen or oxygenated compounds.The true reaction order of these decomposition reactions is one above 1400°C, but becomes smaller at lower temperatures. This behaviour, common in gas-solid reactions, is generally interpreted as an inhibition due to chemisorption of some intermediate or reaction product. Evidence is also obtained that decomposition of the hydrocarbon molecules only occurs on peculiar sites of the carbon surface, i.e. the decomposition is not a purely thermal process, but involves a specific chemical interaction with the surface.Moreover, the behaviour of the pyrocarbon surface in carbon deposition reactions is similar to that observed in gasification reactions, i.e. the reactivity of the surface accommodates itself to the temperature and pressure conditions, as revealed by the observation of “transitory” and “stationary rates”. Transitory rates show that the surface deactivates with increasing temperatures (Figs. 4 and 5) [from which a maximum in the stationary rate results (Figs. 1–3)] and decreasing pressures (Figs. 7 and 8). The interpretation assumes that reaction sites are continuously created as an effect of carbon atoms deposition, but also deactivated by a thermal healing process.A main difference between carbon deposition reactions from hydrocarbons and carbon gasification reactions concerns the temperature range where reactivity is temperature dependent: in carbon deposition reactions, deactivation of the pyrocarbon surface is still effective up to much higher temperatures (Fig. 12).     

Non-intrusive Coupling: Recent Advances and Scalable Nonlinear Domain Decomposition

This paper provides a detailed review of the global/local non-intrusive coupling algorithm. Such method allows to alter a global finite element model, without actually modifying its corresponding numerical operator. We also look into improvements of the initial algorithm (Quasi-Newton and dynamic relaxation), and provide comparisons based on several relevant test cases. Innovative examples and advanced applications of the non-intrusive coupling algorithm are provided, granting a handy framework for both researchers and engineers willing to make use of such process. Finally, a novel nonlinear domain decomposition method is derived from the global/local non-intrusive coupling strategy, without the need to use a parallel code or software. Such method being intended to large scale analysis, we show its scalability. Jointly, an efficient high level Message Passing Interface coupling framework is also proposed, granting an universal and flexible way for easy software coupling. A sample code is also given.     

Processing and characterisation of precision microparts from nickel-based materials

The objective of this research was to study the influence of electroplating parameters on electrodeposit characteristics for the production of nickel (Ni) and nickel–iron (Ni–Fe) microparts by photoelectroforming. The research focused on the most relevant parameter for industry, which is the current density, because it determines the process time and the consumed energy. The results of the Ni and Ni–Fe characterisations can be divided into two aspects closely linked with each other: the morphology and the hardness.     

Cytocompatibility of titanium metal injection molding with various anodic oxidation post-treatments

Metal injection molding (MIM) is a near net shape manufacturing method that allows for the production of components of small to moderate size and complex shape. MIM is a cost-effective and flexible manufacturing technique that provides a large innovative potential over existing methods for the industry of implantable devices. Commercially pure titanium (CP-Ti) samples were machined to the same shape as a composite feedstock with titanium and polyoxymethylene, and these metals were injected, debinded and sintered to assess comparative biological properties. Moreover, we treated MIM-Ti parts with BIOCOAT®, BIODIZE® and BIOCER®, three different anodic oxidation techniques that treat titanium using acid, alkaline and anion enriched electrolytes, respectively. Cytocompatibility as well as morphological and chemical features of surfaces was comparatively assessed on each sample, and the results revealed that MIM-Ti compared to CP-Ti demonstrated a specific surface topography with a higher roughness. MIM-Ti and BIOCER® samples significantly enhanced cell proliferation, cell adhesion and cell differentiation compared to CP-Ti. Interestingly, in the anodization post-treatment established in this study, we demonstrated the ability to improve osseointegration through anionic modification treatment. The excellent biological response we observed with MIM parts using the injection molding process represents a promising manufacturing method for the future implantable devices in direct contact with bones.     

Effects of ethyl-3-nitrooxy propionate and 3-nitrooxypropanol on ruminal fermentation,microbial abundance,and methane emissions in sheep

The aim of this work was to investigate the effect of feeding ethyl-3-nitrooxy propionate (E3NP) and 3-nitrooxypropanol (3NP), 2 recently developed compounds with potential antimethanogenic activity, in vitro and in vivo in nonlactating sheep on ruminal methane production, fermentation pattern, the abundance of major microbial groups, and feed degradability. Three experiments were conducted, 1 in vitro and 2 in vivo. The in vitro batch culture trial (experiment 1) tested 2 doses of E3NP and 3NP (40 and 80 μL/L), which showed a substantial reduction of methane production (up to 95%) without affecting concentration of volatile fatty acids (VFA). The 2 in vivo trials were conducted over 16 d (experiment 2) and 30 d (experiment 3) to study their effects in sheep. In experiment 2, 6 adult nonpregnant sheep, with permanent rumen cannula and fed alfalfa hay and oats (60:40), were treated with E3NP at 2 doses (50 and 500 mg/animal per day). After 7, 14, and 15 d of treatment, methane emissions were recorded in respiration chambers and rumen fluid samples were collected for VFA analysis and quantification of bacterial, protozoal, and archaeal numbers by real-time PCR. Methane production decreased by 29% compared with the control with the higher dose of E3NP on d 14 to 15. A decrease in the acetate:propionate ratio was observed without detrimental effects on dry matter intake. In experiment 3, 9 adult nonpregnant sheep, with permanent rumen cannula and fed with alfalfa hay and oats (60:40), were treated with E3NP or 3NP at one dose (100 mg/animal per day) over 30 d. On d 14 and d 29 to 30, methane emissions were recorded in respiration chambers. Rumen fluid samples were collected on d 29 and 30 for VFA analysis and quantification of bacterial, protozoal, and archaeal numbers by real-time PCR. In addition, on d 22 and 23, samples of oats and alfalfa hay were incubated in the rumen of sheep to determine dry matter ruminal degradation over 24 and 48 h, respectively; no effect was observed (78.6, 78.3, and 78.8% of alfalfa and 74.2, 74.0, and 70.6% of oats in control, E3NP, and 3NP groups, respectively). A reduction in methane production was observed for both additives at d 14 and d 29 to 30. In both treatments, the acetate:propionate ratio was significantly decreased. Likewise, total concentrations of the analyzed microbial groups in the rumen showed no difference among treatments and doses for both experiments. Both tested compounds showed promise as methane inhibitors in the rumen, with no detrimental effects on fermentation or intake, which would need to be confirmed in lactating animals.     

Influence of the Oxygen Partial Pressure on the Oxidation of Inconel 617 Alloy at High Temperature

Ni-based superalloy Inconel 617 (IN617) is one of the main candidate structural materials for high temperature components (heat exchanger) of the gas-cooled fast reactor (GFR), a possible candidate for generation IV nuclear reactor. The material in operating conditions will be exposed to impure He at a temperature of around 850 °C. The impurities are expected to be oxidizing (such as O₂, H₂O) but since no feedback experience is available for this type of reactor, the level of impurities is completely unknown. Hence, an attempt has been made to understand the influence of oxygen partial pressure on oxide composition and on the oxidation mechanisms of IN617 at 850 °C. To achieve this, oxidation tests were performed at 3 different range of partial pressure: 10^?5, 0.2 and 200 mbar. Tests were performed from 1 h to 28 days and the obtained oxide layers were characterized using MEB, EDX, XPS, XRD and GD-OES. The oxide layers were mainly composed of chromia containing TiO₂ and thickening with time. Aluminium oxide formed internally. Other oxides were detected in the scale, such as NiO, CoO, MoO₃ and MnO₂, except for the lowest oxygen partial pressure experiments, where a selective oxidation took place. The scale-growth mechanism was cationic for low and medium oxygen partial pressure conditions. A growth following a transient oxidation mechanism was observed for high oxygen partial pressure.     

Dynamic mechanical analysis of the multiple glass transitions of plasticized wheat gluten biopolymer

Glass transition of thermo‐molded biomaterials made from wheat gluten and its main protein classes is studied by dynamic mechanical analysis (DMA). The materials are plasticized with variable contents of glycerol (30–40 wt %) and water (0–20 wt %). For all materials, three successive relaxation phases are systematically detected. Their positions shift to lower temperature as the plasticizer content of materials increases. Composition in gluten, glycerol and water of each relaxation phase is estimated using the Couchman‐Karasz model. Irrespective of the plasticizer content or composition, the relaxation phases shows rather constant plasticizer volume fractions. The low‐, middle‐, and high relaxation phases include respectively around 30, 60 and 80 vol % of gluten protein. These relaxations are assigned to the segmental motion of the surface amino‐acid side groups, to the collective motion of packed gluten proteins, and to the gain in protein conformational mobility as a 2D network of interacting plasticizer molecules forms. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43254.     

Effect of triacylglycerol structure on absorption and metabolism of isotope-labeled palmitic and linoleic acids by humans

The effect of dietary TAG structure and fatty acid acyl TAG position on palmitic and linoleic acid metabolism was investigated in four middle-aged male subjects. The study design consisted of feeding diets containing 61 g/d of native lard (NL) or randomized lard (RL) for 28 d. Subjects then received an oral dose of either 1,3-tetradeuteriopalmitoyl-2-dideuteriolinoleoyl-rac-glycerol or a mixture of 1,3-dideuteriolinoleoyl-2-tetradeuteriopalmitoyl-rac-glycerol and 1,3-hexadeuteriopalmitoyl-2-tetradeuteriolinoleoyl-rac-glycerol. Methyl esters of plasma lipids isolated from blood samples drawn over a 2-d period were analyzed by GC-MS. Results showed that absorption of the ²H-fatty acids (²H-FA) was not influenced by TAG position. The ²H-FA at the 2-acyl TAG position were 85±4.6% retained after absorption. Substantial migration of ²H-16∶0 (31.2±8.6%) from the sn-2 TAG position to the sn-1,3 position and ²H-18∶2n−6 (52.8±6.4%) from the sn-1,3 position to the sn-2 position of chylomicron TAG occurred after initial absorption and indicates the presence of a previously unrecognized isomerization mechanism. Incorporation and turnover of the ²H-FA in chylomicron TAG, plasma TAG, and plasma cholesterol esters were not influenced by TAG acyl position. Accretion of ²H-16∶0 from the sn-2 TAG position in 1-acylphosphatidylcholine was 1.7 times higher than ²H-16∶0 from the sn-1,3 TAG positions. Acyl TAG position did not influence ²H-18∶2n−6 incorporation in PC. The concentration of ²H-18∶2n−6-derived ²H-20∶4n−6 in plasma PC from subjects fed, the RL diet was 1.5 times higher than for subjects fed the NL diet, and this result suggests that diets containing 16∶0 located at the sn-2 TAG position may inhibit 20∶4n−6 synthesis. The overall conclusion is that selective rearrangement of chylomicron TAG structures diminishes but does not totally eliminate the metabolic and physiological effects of dietary TAG structure.