The effect of methods of introducing acrylic emulsions grafted with acetoacetyl groups on the properties of particleboards

The aim of this study was to investigate the effect of compounds, either spread on particles or added to the resin, which contain various numbers of acetoacetyl groups in terms of their effect on formaldehyde content and the physical and mechanical properties of particleboards glued with the urea‐formaldehyde (UF) resin. The produced particleboards were subjected to the following European Standards standard tests: internal bond, modulus of rupture, modulus of elasticity, swelling in thickness after 24 h of soaking in water, and the content of formaldehyde. Results of the study make it possible to state that both the spreading of the acrylic emulsions containing acetoacetyl groups on the particles before gluing and the adding of them to the UF resin result in a decrease of formaldehyde content and improvement of physical and mechanical properties of particleboards. Boards with better properties were obtained in the case when emulsions containing acetoacetyl groups were spread directly on the surface of particles. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2256–2264, 2004     

Alleviation of Osmotic Stress Effects by Exogenous Application of Salicylic or Abscisic Acid on Wheat Seedlings

The aim of the study was to assess the role of salicylic acid (SA) and abscisic acid (ABA) in osmotic stress tolerance of wheat seedlings. This was accomplished by determining the impact of the acids applied exogenously on seedlings grown under osmotic stress in hydroponics. The investigation was unique in its comprehensiveness, examining changes under osmotic stress and other conditions, and testing a number of parameters simultaneously. In both drought susceptible (SQ1) and drought resistant (CS) wheat cultivars, significant physiological and biochemical changes were observed upon the addition of SA (0.05 mM) or ABA (0.1 μM) to solutions containing half-strength Hoagland medium and PEG 6000 (−0.75 MPa). The most noticeable result of supplementing SA or ABA to the medium (PEG + SA and PEG + ABA) was a decrease in the length of leaves and roots in both cultivars. While PEG treatment reduced gas exchange parameters, chlorophyll content in CS, and osmotic potential, and conversely, increased lipid peroxidation, soluble carbohydrates in SQ1, proline content in both cultivars and total antioxidants activity in SQ1, PEG + SA or PEG + ABA did not change the values of these parameters. Furthermore, PEG caused a two-fold increase of endogenous ABA content in SQ1 and a four-fold increase in CS. PEG + ABA increased endogenous ABA only in SQ1, whereas PEG + SA caused a greater increase of ABA content in both cultivars compared to PEG. In PEG-treated plants growing until the harvest, a greater decrease of yield components was observed in SQ1 than in CS. PEG + SA, and particularly PEG + ABA, caused a greater increase of these yield parameters in CS compared to SQ1. In conclusion, SA and ABA ameliorate, particularly in the tolerant wheat cultivar, the harmful effects and after effects of osmotic stress induced by PEG in hydroponics through better osmotic adjustment achieved by an increase in proline and carbohydrate content as well as by an increase in antioxidant activity.     

Potential of shortening pressing time or reducing pressing temperature for plywood resinated with PF resin modified using alcohols and esters

The study was an analysis of the potential to shorten pressing time or reduce pressing temperature for plywood resinated with alcohol- and ester-modified PF resin. Birch and pine plywoods were produced using such modified resin at a temperature range of 135 to 115?°C, at a constant pressing time (4 min) and at pressing times ranging from 240 to 150 s at a constant pressing temperature (135?°C). Tests showed that the application of PF resin modified with polyols and esters makes it possible, under standard pressing conditions, i.e. 135?°C and pressing time of 4 min, to produce plywood with improved properties in comparison to respective control plywoods. Moreover, it was shown that the used modifiers enhance resin reactivity, facilitating an adequate course of resin curing, resulting in the manufacture of plywoods with good properties even at a pressing temperature reduced by 20?°C or pressing time shortened to 150 s.     

ROS-Scavengers,Osmoprotectants and Violaxanthin De-Epoxidation in Salt-Stressed Arabidopsis thaliana with Different Tocopherol Composition

To determine the role of α- and γ-tocopherol (TC), this study compared the response to salt stress (200 mM NaCl) in wild type (WT) Arabidopsis thaliana (L.) Heynh. And its two mutants: (1) totally TC-deficient vte1; (2) vte4 accumulating γ-TC instead of α-TC; and (3) tmt transgenic line overaccumulating α-TC. Raman spectra revealed that salt-exposed α-TC accumulating plants were more flexible in regulating chlorophyll, carotenoid and polysaccharide levels than TC deficient mutants, while the plants overaccumulating γ-TC had the lowest levels of these biocompounds. Tocopherol composition and NaCl concentration affected xanthophyll cycle by changing the rate of violaxanthin de-epoxidation and zeaxanthin formation. NaCl treated plants with altered TC composition accumulated less oligosaccharides than WT plants. α-TC deficient plants increased their oligosaccharide levels and reduced maltose amount, while excessive accumulation of α-TC corresponded with enhanced amounts of maltose. Salt-stressed TC-deficient mutants and tmt transgenic line exhibited greater proline levels than WT plants, lower chlorogenic acid levels, and lower activity of catalase and peroxidases. α-TC accumulating plants produced more methylated proline- and glycine- betaines, and showed greater activity of superoxide dismutase than γ-TC deficient plants. Under salt stress, α-TC demonstrated a stronger regulatory effect on carbon- and nitrogen-related metabolites reorganization and modulation of antioxidant patterns than γ-TC. This suggested different links of α- and γ-TCs with various metabolic pathways via various functions and metabolic loops.     

The Investigation of Strain-Induced Martensite Reverse Transformation in AISI 304 Austenitic Stainless Steel

This paper presents a comprehensive study on the strain-induced martensitic transformation and reversion transformation of the strain-induced martensite in AISI 304 stainless steel using a number of complementary techniques such as dilatometry, calorimetry, magnetometry, and in-situ X-ray diffraction, coupled with high-resolution microstructural transmission Kikuchi diffraction analysis. Tensile deformation was applied at temperatures between room temperature and 213 K (−60 °C) in order to obtain a different volume fraction of strain-induced martensite (up to ~70 pct). The volume fraction of the strain-induced martensite, measured by the magnetometric method, was correlated with the total elongation, hardness, and linear thermal expansion coefficient. The thermal expansion coefficient, as well as the hardness of the strain-induced martensitic phase was evaluated. The in-situ thermal treatment experiments showed unusual changes in the kinetics of the reverse transformation (α′ → γ). The X-ray diffraction analysis revealed that the reverse transformation may be stress assisted—strains inherited from the martensitic transformation may increase its kinetics at the lower annealing temperature range. More importantly, the transmission Kikuchi diffraction measurements showed that the reverse transformation of the strain-induced martensite proceeds through a displacive, diffusionless mechanism, maintaining the Kurdjumov–Sachs crystallographic relationship between the martensite and the reverted austenite. This finding is in contradiction to the results reported by other researchers for a similar alloy composition.

     

Mode of Action of 1-Naphthylphthalamic Acid in Conspicuous Local Stem Swelling of Succulent Plant,Bryophyllum calycinum: Relevance to the Aspects of Its Histological Observation and Comprehensive Analyses of Plant Hormones

The mode of action of 1-naphthylphthalamic acid (NPA) to induce conspicuous local stem swelling in the area of its application to the growing internode in intact Bryophyllum calycinum was studied based on the aspects of histological observation and comprehensive analyses of plant hormones. Histological analyses revealed that NPA induced an increase in cell size and numerous cell divisions in the cortex and pith, respectively, compared to untreated stem. In the area of NPA application, vascular tissues had significantly wider cambial zones consisting of 5–6 cell layers, whereas phloem and xylem seemed not to be affected. This indicates that stem swelling in the area of NPA application is caused by stimulation of cell division and cell enlargement mainly in the cambial zone, cortex, and pith. Comprehensive analyses of plant hormones revealed that NPA substantially increased endogenous levels of indole-3-acetic acid (IAA) in the swelling area. NPA also increased endogenous levels of cytokinins, jasmonic acid, and its precursor, 12-oxo-phytodienoic acid, but did not increase abscisic acid and gibberellin levels. It was shown, using radiolabeled ¹⁴C-IAA, that NPA applied to the middle of internode segments had little effect on polar auxin transport, while 2,3,5-triiodobenzoic acid substantially inhibited it. These results strongly suggest that NPA induces changes in endogenous levels of plant hormones, such as IAA, cytokinins, and jasmonic acid, and their hormonal crosstalk results in a conspicuous local stem swelling. The possible different mode of action of NPA from other polar auxin transport inhibitors in succulent plants is extensively discussed.     

Physiological and Biochemical Parameters of Salinity Resistance of Three Durum Wheat Genotypes

The area of farming lands affected by increasing soil salinity is growing significantly worldwide. For this reason, breeding works are conducted to improve the salinity tolerance of important crop species. The goal of the present study was to indicate physiological or biochemical parameters characterizing three durum wheat accessions with various tolerance to salinity. The study was carried out on germinating seeds and mature plants of a Polish SMH87 line, an Australian cultivar ‘Tamaroi’ (salt-sensitive), and the BC₅Nax₂ line (salt-tolerant) exposed to 0–150 mM NaCl. Germination parameters, electrolyte leakage (EL), and salt susceptibility index were determined in the germinating caryopses, whereas photosynthetic parameters, carbohydrate and phenolic content, antioxidant activity as well as yield were measured in fully developed plants. The parameters that most differentiated the examined accessions in the germination phase were the percentage of germinating seeds (PGS) and germination vigor (Vi). In the fully developed plants, parameters included whether the plants had the maximum efficiency of the water-splitting reaction on the donor side of photosystem II (PSII)–F_v/F₀, energy dissipation from PSII–DI_o/CS_m, and the content of photosynthetic pigments and hydrogen peroxide, which differentiated studied genotypes in terms of salinity tolerance degree. Salinity has a negative impact on grain yield by reducing the number of seeds per spike and the mass of one thousand seeds (MTS), which can be used as the most suitable parameter for determining tolerance to salinity stress. The most salt-tolerant BC₅Nax₂ line was characterized by the highest PGS, and Vi for NaCl concentration of 100–150 mM, content of chlorophyll a, b, carotenoids, and also MTS at all applied salt concentrations as compared with the other accessions. The most salt-sensitive cv. ‘Tamaroi’ demonstrated higher H₂O₂ concentration which proves considerable oxidative damage caused by salinity stress. Mentioned parameters can be helpful for breeders in the selection of genotypes the most resistant to this stress.     

Reducing Flower Competition for Assimilates by Half Results in Higher Yield of Fagopyrum esculentum

Despite abundant flowering throughout the season, common buckwheat develops a very low number of kernels probably due to competition for assimilates. We hypothesized that plants with a shorter flowering period may give a higher seed yield. To verify the hypothesis, we studied nutrient stress in vitro and in planta and analyzed different embryological and yield parameters, including hormone profile in the flowers. In vitro cultivated flowers on media with strongly reduced nutrient content demonstrated a drastic increase in degenerated embryo sacs. In in planta experiments, where 50% or 75% of flowers or all lateral ramifications were removed, the reduction of the flower competition by half turned out to be the most promising treatment for improving yield. This treatment increased the frequency of properly developed embryo sacs, the average number of mature seeds per plant, and their mass. Strong seed compensation under 50% inflorescence removal could result from increased production of salicylic and jasmonic acid that both favor more effective pollinator attraction. Plants in single-shoot cultivation finished their vegetation earlier, and they demonstrated greater single seed mass per plant than in control. This result suggests that plants of common buckwheat with shorter blooming period could deliver higher seed yield.