Multiple Scan Chain Design for Two-Pattern Testing

Non-standard fault models often require the application of two-pattern testing. A fully-automated approach for generating a multiple scan chain-based architecture is presented so that two-pattern test sets generated for the combinational core can be applied to the sequential circuit. Test time and area overhead constraints are considered.     

EEG spectral abnormalities and psychosis as predictors of cognitive and functional decline in probable Alzheimer's disease

We examined whether either psychotic features (e.g., delusions and hallucinations) or EEG abnormalities are associated with more rapid progression of Alzheimer's disease (AD). AD patients with psychosis have exhibited more EEG abnormalities than those without psychosis, and both abnormal EEG and psychosis have been noted to be predictors of functional and cognitive decline in AD. Ninety-five probable AD patients participating in a longitudinal study of dementia had an EEG and a semistructured psychiatric interview at baseline. Using EEG spectral analysis, we classified records as normal/abnormal based on the parasagittal mean frequency. Patients with abnormal EEGs were more functionally (e.g., Blessed Rating Scale for activities of daily living) and cognitively (e.g., Mini-Mental State) impaired than patients with normal EEG. AD patients with psychosis were only more functionally impaired than patients without psychosis. A two-factor analysis showed no interaction between abnormal EEG and psychosis. In addition, using a Cox proportional hazard model adjusted for age and education, the presence of an abnormal EEG or psychotic symptom at study entry was associated with higher risk of reaching severe cognitive and functional impairment during follow-up. Neither abnormal EEG nor the presence of psychosis predicted death. These results indicate that both abnormal EEG and psychosis are independent predictors of disease progression but not of physical survival.     

Patterning of the chick forebrain anlage by the prechordal plate

We analysed the role of the prechordal plate in forebrain development of chick embryos in vivo. After transplantation to uncommitted ectoderm a prechordal plate induces an ectopic, dorsoventrally patterned, forebrain-like vesicle. Grafting laterally under the anterior neural plate causes ventralization of the lateral side of the forebrain, as indicated by a second expression domain of the homeobox gene NKX2.1. Such a lateral ventralization cannot be induced by the secreted factor Sonic Hedgehog alone, as this is only able to distort the ventral forebrain medially. Removal of the prechordal plate does not reduce the rostrocaudal extent of the anterior neural tube, but leads to significant narrowing and cyclopia. Excision of the head process results in the caudal expansion of the NKX2.1 expression in the ventral part of the anterior neural tube, while PAX6 expression in the dorsal part remains unchanged. We suggest that there are three essential steps in early forebrain patterning, which culminate in the ventralization of the forebrain. First, anterior neuralization occurs at the primitive streak stage, when BMP-4-antagonizing factors emanate from the node and spread in a planar fashion to induce anterior neural ectoderm. Second, the anterior translocation of organizer-derived cells shifts the source of neuralizing factors anteriorly, where the relative concentration of BMP-4-antagonists is thus elevated, and the medial part of the prospective forebrain becomes competent to respond to ventralizing factors. Third, the forebrain anlage is ventralized by signals including Sonic Hedgehog, thereby creating a new identity, the prospective hypothalamus, which splits the eye anlage into two lateral domains.     

Kinetic analysis of the coding properties of O6-methylguanine in DNA: the crucial role of the conformation of the phosphodiester bond

Production by N-nitroso compounds of O6-alkylguanine (O6-alkylG) in DNA directs the misincorporation of thymine during DNA replication, leading to G:C to A:T transition mutations, despite the fact that DNA containing O6-alkylG:T base pairs is less stable than that containing O6-alkylG:C pairs. We have examined the kinetics of incorporation by Klenow fragment (KF) of Escherichia coli DNA polymerase I of thymine (T) and of cytosine (C) opposite O6-MeG in the template DNA strand. Both T and C were incorporated opposite O6-MeG much slower than nucleotides forming regular A:T or G:C base pairs. Using various concentrations of dTTP, dCTP, or their phosphorothioate (Sp)-dNTP alpha S analogues, or a mixture of dTTP and dCTP, the progress of incorporation of a single nucleotide in a single catalytic cycle of a preformed KF-DNA complex was measured (pre-steady-state kinetics). The results were consistent with the kinetic scheme (Kuchta, R. D., Benkovic, P., & Benkovic, S. J. (1988) Biochemistry 27, 6716-6725): (1) binding of dNTP to polymerase-DNA; (2) conformational change in polymerase; (3) formation of phosphodiester between the dNTP and the 3'-OH of the primer; (4) conformational change of polymerase; (5) release of pyrophosphate. The results were analyzed mathematically to identify the steps at which the rate constants differ significantly between the incorporation of T and C. The only significant difference was the 5-fold difference in the rates of formation of the phosphodiester bond (for dTTP, kforward = 3.9 s-1 and kback = 1.9 s-1; for dCTP, kforward = 0.7 s-1 and kback = 0.9 s-1). These pre-steady-state progress curves were biphasic with a rapid initial burst followed by an apparently steady-state rise. Deconvolution of these curves gave direct evidence for the importance of the conformational change after polymerization by showing that the curves represented the sum of the rapid accumulation of the product of step 3 followed by the slow conversion of that to the product of step 5 (because of the rapidity of the release of pyrophosphate there was no significant accumulation of the product of step 4). The equilibrium constants for each step suggest that the greatest change in the Gibbs free energy occurs at the conformational change after polymerization and that while the formation of the phosphodiester bond to T is slightly exothermic, that to C is slightly endothermic.(ABSTRACT TRUNCATED AT 400 WORDS)     

Display reflectance: Basics,measurement, and rating

Abstract— In this paper, methods and instruments for measurement and evaluation of reflection characteristics are reviewed as needed for research and development of electronic displays and for material and surface modeling with ray‐tracing and rendering software packages. Contrast under ambient illumination and recognizability under daylight illumination are prime development targets in the electronic‐display field, while computation and synthesis of realistic scenes and objects are pushing the need for physical data in computer graphics applications. Three categories of instruments are available for detailed reflection analysis. They are based on (1) gonioscopic (mechanical) and conoscopic (optical) directional scanning, (2) imaging approaches, and (3) on arrangements with variable source or receiver aperture. The capabilities, advantages, and limitations of these methods are introduced and discussed in order to facilitate appropriate selection of methods and instruments. For illustration purposes we present typical results obtained from commercial electronic display screens. A basis for continued widespread implementation and standardization of reflection metrology as required for objective rating and comparison of electronic‐display screen performance under ambient illumination is provided.     

Reliability Potential Of Epoxy Based Encapsulants For Automotive Applications

Automotive under-the-hood electronics often have to withstand temperatures up to 175 °C in combination with harsh environment conditions. This paper gives an overview about the reliability potential of epoxy based encapsulants for automotive applications. Therefore the resistance of epoxy molding compound against typical automotive fluids at temperature of use is analyzed. Six epoxy molding compounds available on the market, showing high temperature automotive potential have been carefully selected to undergo a media resistance testing. For this purpose a dedicated mold tool has been designed and manufactured to prepare these encapsulants for material testing. Thermo-mechanical, mechanical and thermal properties had been determined in initial state directly after molding and after storage in aggressive fluids typical for automotive applications as e.g. gas oil, automatic transmission fluid (ATF), brake fluid or accumulator acid at the respective temperature of use.     

Overcoming the challenges in deploying user provisioning/identity access management backbone

This paper sets out to share BT's leadership and experience by determining the identity management opportunities and issues, then document the lessons learnt in previous deployments and recommend strategies for all types and sizes of organisation. Today's ICT environment has created a mixed approach to access management across sectors. Browser-based any time, anywhere, anyone access, coupled with the business need to access more systems and services across a changing infrastructure of distributed platforms and networked services, has changed the administrative landscape. Enterprises are being forced to add administrative support staff or invest in technology-driven process change. At the same time, users are undergoing significant change, creating new expectations in service quality. Moreover, regulatory bodies are demanding confirmation that processes granting access are controlled and documented. In this world of increasing demands, complexity and expectation, the service management tools, techniques and options available to improve user access management are as varied and numerous as the issues faced by management in their deployment. Identity management is widely heralded as an opportunity to improve the end user experience, reduce costs, improve security and deliver regulatory compliance — but is often misunderstood. Projects regularly fail to achieve the expected benefits. These failures are the result of expectations being inappropriately set, deployment of solutions turning out to be more complex or taking longer than expected, and/or products selected before required functionality has been determined. For the larger more mature organisations, or those organisations that are the amalgamation of mergers and acquisitions, the dilemma is where to start and what approach to take.     

Comparison of two methods of surfactant administration and the effect on dosing-associated hypoxemia

OBJECTIVE: The purpose of our study was to test the hypothesis that surfactant dosing through a proximal sideport adapter on an endotracheal tube leads to more dosing-associated hypoxemia compared with a method of dosing that uses a double-lumen endotracheal tube. STUDY DESIGN: Using adequate sample size to compare significant changes in O2 saturation (power > 0.8, alpha < 0.05) we enrolled 36 infants with respiratory distress syndrome in this randomized trial. A 10% change in O2 saturation was considered clinically significant. Nineteen infants received 38 doses of surfactant through the sideport adapter. Seventeen infants received 31 doses of surfactant through the nonventilation lumen of a double-lumen endotracheal tube. Two main outcome measures were assessed: time-averaged O2 saturation values 30 minutes after dosing and the largest absolute fall in O2 saturation for each patient. RESULTS AND CONCLUSIONS: Time-averaged O2 saturation measures were higher in the proximal sideport group (p = 0.02), but the magnitude of difference was probably not clinically significant. No significant difference was detected between groups when we compared largest absolute drop in O2 saturation. Secondary analyses found no effect of birth weight or dose number (second vs third dose) on either outcome measure.     

Triggering of cellulase biosynthesis by cellulose in Trichoderma reesei. Involvement of a constitutive, sophorose-inducible, glucose-inhibited beta-diglucoside permease

We prepared [U-14C]cellobiose by cultivating Acetobacter pasteurianus in the presence of [U-14C]glucose and hydrolyzing the [U-14C]cellulose formed with beta-glucosidase-free cellulase from Trichoderma reesei. This 14C-labeled cellobiose was used to investigate the presence of an uptake system for cellobiose in T. reesei. Evidence was obtained for the presence of a high affinity (Km for cellobiose 0.3 microM) but low activity (2.5 milliunits/mg fungal dry weight) cellobiose permease. The permease is formed constitutively, but higher levels are formed after addition of sophorose (glucosyl-beta-1,2-diglucoside), a reputed cellulase inducer. The permease appears to be specific for beta-diglucosides, as the uptake of [U-14C]cellobiose is inhibited by sophorose, gentiobiose (glucosyl-beta-1,3-glucoside), and cellobiose. Under these conditions, cellooligodextrines (n, 4-7; final concentration, 1 mM) are not inhibitors. Glucose, but no other monosaccharides, inhibits the permease. The hypersecretory mutant T. reesei RUT C-30 exhibits elevated permease activities, whereas in T. reesei QM 9979, a mutant strain defective in the induction of cellulases by cellulose or sophorose, strongly reduced permease activities were demonstrated. The results stress a hitherto not recognized point of control in the induction of cellulases by T. reesei at the level of uptake of cellulose oligosaccharides.