Optimised anaerobic treatment of house-sorted biodegradable waste and slaughterhouse waste in a high loaded half technical scale digester.

Anaerobic co-digestion of organic wastes from households, slaughterhouses and meat processing industries was optimised in a half technical scale plant. The plant was operated for 130 days using two different substrates under organic loading rates of 10 and 12 kgCOD.m(-3).d(-1). Since the substrates were rich in fat and protein components (TKN: 12 g.kg(-1) the treatment was challenging. The process was monitored on-line and in the laboratory. It was demonstrated that an intensive and stable co-digestion of partly hydrolysed organic waste and protein rich slaughterhouse waste can be achieved in the balance of inconsistent pH and buffering NH4-N. In the first experimental period the reduction of the substrate COD was almost complete in an overall stable process (COD reduction >82%). In the second period methane productivity increased, but certain intermediate products accumulated constantly. Process design options for a second digestion phase for advanced degradation were investigated. Potential causes for slow and reduced propionic and valeric acid degradation were assessed. Recommendations for full-scale process implementation can be made from the experimental results reported. The highly loaded and stable codigestion of these substrates may be a good technical and economic treatment alternative.     

The specific antibacterial proliferation of reactive arthritis synovial T cells is not due to their higher proportion of CD45RO+ cells compared to peripheral blood

OBJECTIVE: To determine the role of synovial fluid (SF) compared to peripheral blood (PB) CD45RO+ T cells in patients with reactive arthritis (ReA) and undifferentiated oligoarthritis. METHODS: We examined SF and PB of 8 patients with a specific lymphocyte proliferation to Yersinia enterocolitica (n = 5) and Chlamydia trachomatis (n = 3). After depletion of the CD45RA+ T cell subset by dynabeads, the remaining T cells (> 95% CD45RO+) from PB and SF of these patients were again stimulated with these bacterial antigens. RESULTS: The mean stimulation index (SI) of these 8 patients with ReA (n = 5) and undifferentiated oligoarthritis (n = 3) was 30.3 +/- 21.86 in SF compared to 1.36 +/- 0.75 in PB. The enrichment of CD45RO+ cells influenced the antigen specific proliferative response of T cells neither in PB (SI = 1.75 +/- 1.35) nor in SF (26.1 +/- 24.05); the initial difference remained unchanged. CONCLUSION: Our findings suggest that the antigen specific lymphocyte proliferation obtained with SF cells is not due to abundance of nonspecific CD45RO+ T cells but can rather be taken as an indication of specific recognition of local bacterial antigens in ReA.     

Patterning of the chick forebrain anlage by the prechordal plate

We analysed the role of the prechordal plate in forebrain development of chick embryos in vivo. After transplantation to uncommitted ectoderm a prechordal plate induces an ectopic, dorsoventrally patterned, forebrain-like vesicle. Grafting laterally under the anterior neural plate causes ventralization of the lateral side of the forebrain, as indicated by a second expression domain of the homeobox gene NKX2.1. Such a lateral ventralization cannot be induced by the secreted factor Sonic Hedgehog alone, as this is only able to distort the ventral forebrain medially. Removal of the prechordal plate does not reduce the rostrocaudal extent of the anterior neural tube, but leads to significant narrowing and cyclopia. Excision of the head process results in the caudal expansion of the NKX2.1 expression in the ventral part of the anterior neural tube, while PAX6 expression in the dorsal part remains unchanged. We suggest that there are three essential steps in early forebrain patterning, which culminate in the ventralization of the forebrain. First, anterior neuralization occurs at the primitive streak stage, when BMP-4-antagonizing factors emanate from the node and spread in a planar fashion to induce anterior neural ectoderm. Second, the anterior translocation of organizer-derived cells shifts the source of neuralizing factors anteriorly, where the relative concentration of BMP-4-antagonists is thus elevated, and the medial part of the prospective forebrain becomes competent to respond to ventralizing factors. Third, the forebrain anlage is ventralized by signals including Sonic Hedgehog, thereby creating a new identity, the prospective hypothalamus, which splits the eye anlage into two lateral domains.     

Kinetic analysis of the coding properties of O6-methylguanine in DNA: the crucial role of the conformation of the phosphodiester bond

Production by N-nitroso compounds of O6-alkylguanine (O6-alkylG) in DNA directs the misincorporation of thymine during DNA replication, leading to G:C to A:T transition mutations, despite the fact that DNA containing O6-alkylG:T base pairs is less stable than that containing O6-alkylG:C pairs. We have examined the kinetics of incorporation by Klenow fragment (KF) of Escherichia coli DNA polymerase I of thymine (T) and of cytosine (C) opposite O6-MeG in the template DNA strand. Both T and C were incorporated opposite O6-MeG much slower than nucleotides forming regular A:T or G:C base pairs. Using various concentrations of dTTP, dCTP, or their phosphorothioate (Sp)-dNTP alpha S analogues, or a mixture of dTTP and dCTP, the progress of incorporation of a single nucleotide in a single catalytic cycle of a preformed KF-DNA complex was measured (pre-steady-state kinetics). The results were consistent with the kinetic scheme (Kuchta, R. D., Benkovic, P., & Benkovic, S. J. (1988) Biochemistry 27, 6716-6725): (1) binding of dNTP to polymerase-DNA; (2) conformational change in polymerase; (3) formation of phosphodiester between the dNTP and the 3'-OH of the primer; (4) conformational change of polymerase; (5) release of pyrophosphate. The results were analyzed mathematically to identify the steps at which the rate constants differ significantly between the incorporation of T and C. The only significant difference was the 5-fold difference in the rates of formation of the phosphodiester bond (for dTTP, kforward = 3.9 s-1 and kback = 1.9 s-1; for dCTP, kforward = 0.7 s-1 and kback = 0.9 s-1). These pre-steady-state progress curves were biphasic with a rapid initial burst followed by an apparently steady-state rise. Deconvolution of these curves gave direct evidence for the importance of the conformational change after polymerization by showing that the curves represented the sum of the rapid accumulation of the product of step 3 followed by the slow conversion of that to the product of step 5 (because of the rapidity of the release of pyrophosphate there was no significant accumulation of the product of step 4). The equilibrium constants for each step suggest that the greatest change in the Gibbs free energy occurs at the conformational change after polymerization and that while the formation of the phosphodiester bond to T is slightly exothermic, that to C is slightly endothermic.(ABSTRACT TRUNCATED AT 400 WORDS)     

Reliability Potential Of Epoxy Based Encapsulants For Automotive Applications

Automotive under-the-hood electronics often have to withstand temperatures up to 175 °C in combination with harsh environment conditions. This paper gives an overview about the reliability potential of epoxy based encapsulants for automotive applications. Therefore the resistance of epoxy molding compound against typical automotive fluids at temperature of use is analyzed. Six epoxy molding compounds available on the market, showing high temperature automotive potential have been carefully selected to undergo a media resistance testing. For this purpose a dedicated mold tool has been designed and manufactured to prepare these encapsulants for material testing. Thermo-mechanical, mechanical and thermal properties had been determined in initial state directly after molding and after storage in aggressive fluids typical for automotive applications as e.g. gas oil, automatic transmission fluid (ATF), brake fluid or accumulator acid at the respective temperature of use.     

Study of a BGO calorimeter using electron and hadron beams from 1 to 50 GeV

A calorimeter of 25 bismuth germanate (BGO) crystals equipped with silicon photodiode readout has been tested at the CERN SPS in the energy range 1–50 GeV. The response for electrons has been shown to be linear in this energy range and the rms resolution obtained ( ) is approximately 1%, for E > 4 GeV. The electron/pion separation was found to be better than 1:500 in the energy range 1–20 GeV. Data on lateral and longitudinal shower development were compared with the results of a Monte Carlo simulation using the SLAC-EGS program and found to be in good agreement.     

April in Paris: signs of artificial life along the Seine

What if every public space and surface were transformed into an interactive experience - capturing our movements, gestures, sounds and actions and using these to produce new sounds, images, text and actions? Bus stops could come alive and talk back, advertisements could look back at you and talk to you and public park robotic devices could play games with you. Will public places eventually become our social barometer as well as director? Will billboards display the populace's discourse? The author look at some special streets in France where the city is literally alive with art and explores what it might mean for us to live in a world of artistic interactivity.     

Condition assessment of unshielded aged power and control cables byelectrical techniques

Experience with electrical diagnostic and high-potential tests, performed at the terminals of unshielded cables in older nuclear and thermal plants is presented. The three basic types of cable-low- and high-voltage power cables, control cables and instrumentation cables-that are important to the reliable operation of a generating station and large industrial plants are described, and their aging mechanisms are indicated. Dielectric testing of unshielded cables, the effect of grounding, field testing of station cables, and insulation characterization at low frequencies are discussed