89-GHz fT room-temperature silicon MOSFETs

The authors report the implementation of deep-submicrometer Si MOSFETs that at room temperature have a unity-current-gain cutoff frequency (f_T) of 89 GHz, for a drain-to-source bias of 1.5 V, a gate-to-source bias of 1 V, a gate oxide thickness of 40 Å, and a channel length of 0.15 μm. The fabrication procedure is mostly conventional, except for the e-beam defined gates. The speed performance is achieved through an intrinsic transit time of only 1.8 ps across the active device region     

Efficiency increase of an induction motor by improving coolingperformance

Improving the efficiency of induction motors, which are the most energy consuming electric machines in the world, saves much energy. The efficiency can be increased by improving cooling performance as well as by using better materials or by improving electromagnetic performance with better design. This paper presents the relationship between the efficiency or the losses and the temperature of coils with experiments as well as simulations by changing parameters such as the load and the flow rate of cooling air. The losses and the efficiency are calculated from an equivalent circuit method as well as experiments. Coil temperatures variation affects much on the efficiency. The internal cooling method is better than that of external cooling for the coil temperature reduction. Several cooling methods are compared focusing on the fan efficiency and performance, from which the values of the efficiencies of the motors are expected. The fan efficiency as well as the fan performance should be considered for the optimum fan design to increase the total efficiency of a motor. The simulations are validated by the comparison with the experiments     

Optimization of silicon solar cell fabrication based on neural network and genetic programming modeling

This study describes techniques for the cascade modeling and the optimization that are required to conduct the simulator-based process optimization of solar cell fabrication. Two modeling approaches, neural networks and genetic programming, are employed to model the crucial relation for the consecutively connected two processes in solar cell fabrication. One model (Model 1) is used to map the five inputs (time, amount of nitrogen and DI water in surface texturing and temperature and time in emitter diffusion) to the two outputs (reflectance and sheet resistance) of the first process. The other model (Model 2) is used to connect the two inputs (reflectance and sheet resistance) to the one output (efficiency) of the second process. After modeling of the two processes, genetic algorithms and particle swarm optimization were applied to search for the optimal recipe. In the first optimization stage, we searched for the optimal reflectance and sheet resistance that can provide the best efficiency in the fabrication process. The optimized reflectance and sheet resistance found by the particle swarm optimization were better than those found by the genetic algorithm. In the second optimization stage, the five input parameters were searched by using the reflectance and sheet resistance values obtained in the first stage. The found five variables such as the texturing time, amount of nitrogen, DI water, diffusion time, and temperature are used as a recipe for the solar cell fabrication. The amount of nitrogen, DI water, and diffusion time in the optimized recipes showed considerable differences according to the modeling approaches. More importantly, repeated applications of particle swarm optimization yielded process conditions with smaller variations, implying greater consistency in recipe generation.     

Particularities of condensation of atoms with increased kinetic energy

Novel universal method for measurement of the condensation coefficient α is developed. Using this method, noticeable difference between measured (α≈0.8) and expected (α≈1) values of the condensation coefficient for sputtered Cr atoms was revealed for the first time. The effect is assumed to be a result of considerable elevation of the surface temperature during atomic condensation induced by the energy delivered to the condensation surface by sputtered atoms and from the plasma.     

Dual-wavelength cascaded Raman fibre laser

Dual-wavelength lasing at 1480 and 1500 nm has been demonstrated from a cascaded Raman fibre laser with a WDM coupler and two pairs of Bragg gratings. Intensity-adjustable, wavelength-tunable laser operation was achieved by tensile stress wavelength tuning of the gratings     

Red bean extract reduces inflammation and increases survival in a murine sepsis model

This study used in vitro and in vivo experimental models to investigate the anti-inflammatory potential of the butanol fraction of red bean ethanol extract (BF-RBEE), which contains the biologically active molecule catechin-7-β-d-glucopyranoside. Treatment with BF-RBEE inhibited nitric oxide production in lipopolysaccharide (LPS)-stimulated macrophages through suppression of extracellular signalregulated kinase and IκBα activation. In an in vivo murine sepsis model, oral administration of BF-RBEE improved mouse survival. Specifically, the survival rate of mice injected with LPS was 0 and 40% in ICR and BALB/c mice, respectively, whereas the survival of mice co-treated with BF-RBEE was 100% in both mouse types. This increase in survival with the BF-RBEE administration was correlated with decreased tumor-necrosis factor-α and interferon-γ and increased interleukin-10. Oral administration of BF-RBEE also inhibited total and ovalbumin-specific IgE production in experimental mice. These results suggest the possible usefulness of red beans in the treatment of inflammatory diseases.     

Efficiency improvement of polymer light-emitting diodes using a quantum dot interlayer between a hole transport layer and an emitting layer

The current efficiency of polymer light-emitting diodes (PLEDs) were improved using a quantum dot interlayer between a hole transport layer and an emitting layer. The quantum dot interlayer played a role of controlling the hole transport in the PLEDs and enhanced the charge balance in the emitting layer. The current efficiency of the PLEDs was increased by more than 20% by the quantum dot interlayer. In particular, the efficiency improvement was significant at high luminance due to reduced efficiency roll-off in the quantum dot-embedded PLEDs.     

Enhanced transformation of triclosan by laccase in the presence of redox mediators

Triclosan (TCS), an antimicrobial agent, is an emerging and persistent environmental pollutant that is often found as a contaminant in surface waters and sediments; hence, knowledge of its degradability is important. In this study we investigated laccase-mediated TCS transformation and detoxification, using laccase (from the fungus Ganoderma lucidum) in the presence and absence of redox mediators. Transformation products were identified using HPLC, ESI-MS and GC-MS, and transformation mechanisms were proposed. In the absence of redox mediator, 56.5% TCS removal was observed within 24 h, concomitant with formation of new products with molecular weights greater than that of TCS. These products were dimers and trimers of TCS, as confirmed by ESI-MS analysis. Among the various mediators tested, 1-hydroxybenzotriazole (HBT) and syringaldehyde (SYD) significantly enhanced TCS transformation (∼90%). The presence of these mediators resulted in products with lower molecular weights than TCS, including 2,4-dichlorophenol (2,4-DCP; confirmed by GC-MS) and dechlorinated forms of 2,4-DCP. When SYD was used as the mediator, dechlorination resulted in 2-chlorohydroquinone (2-CHQ). Bacterial growth inhibition studies revealed that laccase-mediated transformation of TCS effectively decreased its toxicity, with ultimate conversion to less toxic or nontoxic products. Our results confirmed the involvement of two mechanisms of laccase-catalyzed TCS removal: (i) oligomerization in the absence of redox mediators, and (ii) ether bond cleavage followed by dechlorination in the presence of redox mediators. These results suggest that laccase in combination with natural redox mediator systems may be a useful strategy for the detoxification and elimination of TCS from aqueous systems.     

High efficiency red phosphorescent organic light-emitting diodes using a spirobenzofluorene type phosphine oxide as a host material

High efficiency red phosphorescent organic light-emitting diodes have been developed using a spirobenzofluorene type phosphine oxide (SPPO2) as a host material. The SPPO2 had a high glass transition temperature of 119 °C and a smooth surface morphology with a surface roughness less than 1 nm. The red device with the SPPO2 as a host showed a quantum efficiency of 14.3% with a current efficiency of 20.4 cd/A.