Phase formation,structure and properties of light-weight aluminosilicate proppants based on clay-diabase and clay-granite binary mixes

One of the drawbacks of fusible clays is the narrow sintering interval due to a sharp increase in the amount of iron-silicate melt at a temperature of 1000–1100 °C, which hardens in the form of a glass phase upon cooling. This leads to a relatively low mechanical strength of the calcined samples and causes the danger of melting the granular material surface from such clays during the firing process. To increase the strength of samples of fusible clays, the influence of diabase and granitoid rocks was considered. It was found that the strengthening effect of diabase and granitoid rock additives in an amount of 20–50% in a mixture with fusible clay is due to an increase of total content of the crystalline phase (mullite, cristobalite and residual quartz) from 18–20% in clays without additives to 22–28 % - in mixtures with diabase and to 28–34% - with granitoid additives) at a temperature of 1050–1100 °C. This increase is due to the activation of synthesis processes of secondary mullite and crystallization from alkali-rich feldspar melt of amorphous silica, released from the structure of clay minerals. The established influence of the igneous rocks used made it possible to develop compositions and propose process flow sheet for producing aluminosilicate proppants based on fusible clays. The use of granitoid and diabase rocks in an amount of 20–70% with fusible clays produces lightweight aluminosilicate proppants with bulk density of 1.40–1.46 g/cm³ at temperature range of 1050–1100 °C, which can endure destructive pressures up to 34.5–52 MPa.     

The X<Superscript>+</Superscript> trion in a system with spatial separation of the charge carriers

A system composed of two heavy holes located in a two-dimensional (2D) quantum well (QW) and bound via mediation of an electron in a neighboring 2D QW is considered. Using a simple qualitative trial wave function, the ground-state energy of this kind of X⁺ trion is determined in the infinite-hole-mass approximation as a function of the QW spacing. Coordinate dependence of the effective potential binding the holes to each other is calculated for different values of QW spacing. In the adiabatic approximation, a set of dependences describing the X⁺ trion binding energy as a function of the electron mass to the hole mass ratio is obtained. Several estimates for the trion binding energy in GaAs-and ZnSe-based double-QW heterostructures are given.     

A method for functional magnetic resonance imaging of olfaction

A method for generating olfactory stimuli for humans within a functional magnetic resonance imaging (fMRI) experimental design is described. The system incorporates a nasal-mask in which the change from odorant to no-odorant conditions occurs in less than 500 ms and is not accompanied by visual, auditory, tactile, or thermal cues. The mask provides an ordorant-free environment following prolonged ordorant presence. Specific imaging parameters that are conducive to the study of the human olfactory system are described. In a pilot study performed using these methods, the specific patterns of activation observed converged with published experimental and clinical findings.     

Radiation consequences of seawater contamination during floating storage of reactor-compartment units from salvaged nuclear-powered submarines

The storage time before salvaging of decommissioned nuclear-powered submarines and the floating storage time of reactor units from salvaged submarines can total decades. During this time, radioactive contamination of seawater occurs as a result of the corrosion of the pressure hull in the region of the reactor system and rupturing of the pressure hull - as a result of corrosion of the components of the reactor system. A computational analysis shows that under standard storage conditions the specific activity of water is 10⁵–10⁶ times lower than the intervention level. In the case when the hull and the reactor system are destroyed even with remaining fuel, the specific activity of the sea water near the point of sinking also does not exceed the intervention level because of the slow emission of fission products and transuranium nuclides.Translated from Atomnaya Énergiya, Vol. 97, No. 3, pp. 210–218, September, 2004.     

Three-dimensional structure of the cloud of a carbon pellet evaporated in plasma of Wendelstein 7-AS stellarator

Experiments performed on a Wendelstein 7-AS stellarator revealed asymmetry of the cloud of an ablating carbon pellet. The cloud is elongated in the direction of large radius toward stronger fields, that is, opposite to the direction expected due to the toroidal drift. In order to study the effect in more detail, the three-dimensional structure of the cloud was analyzed by computer tomography. The results confirmed asymmetry of the cloud. This asymmetry is related to a drift flow existing in the plasma and directed along large radius toward stronger fields. The drift velocity is numerically estimated at ～300 m/s.