Hereditary neuralgic amyotrophy and hereditary neuropathy with liability to pressure palsies: two distinct clinical, electrophysiologic, and genetic entities

Fistulas secondary to Crohn's disease occur in about 33% of patients. A colobronchial fistula complicating Crohn's disease is very rare, having been reported only twice previously. We present an unusual fistula secondary to Crohn's colitis that originated from the splenic flexure and crossed the diaphragm to involve the bronchial tree.     

New phospholipid fatty acids from the marine spongeCinachyrella alloclada uliczka

The fatty acid composition of phospholipids from the Senegalese spongeCinachyrella alloclada was examined. Two new fatty acids not hitherto found in nature, namely 10,13-octadecadienoic acid and 16-tricosenoic acid, were identified. 8-Hexadecenoic, 13-nonadecenoic and 5,9,13-trimethyltretradecanoic fatty acids were also found for the first time in sponges. The latter compound (1.4% of the total fatty acid mixture), an isoprenoid fatty acid, accompanies the major fatty acid 4,8,12-trimethyltridecanoic acid (19.7%). The monomethyl branched fatty acids (22%) identified include 23-methylpentacosanoic acid (anteiso-26∶0), not previously observed in sponged. The major long-chain fatty acids encountered were the known 17-tetracosenoic 19-heptacosadienoic and 5,9,23-tricontatrienoic acid. Some sixty fatty acids were identified as methyl esters andN-acyl pyrrolidides by gas chromatography and gas chromatography/mass spectrometry.     

Sterols,methyl sterols,triterpene alcohols and fatty acids of the kernel fat of different malagasy mango(Mangifera indica) varieties

The kernel fat content of 16 different mango varieties collected from the Northwestern part of Madagascar island were examined. The fat content (22–54%) was determined by chloroform/methanol extraction. Investigation by gas liquid chromatography (GLC) revealed 15 fatty acids, mainly palmitic (7–12%), stearic (22–40%), oleic (41–48%) and linoleic (7–17%). Significant correlations were observed among the main fatty acids. Testing for the sterol fraction in 15 mango varieties allowed us to separate and quantitatively analyze 7 sterols by GLC. The main sterols wereβ-sitosterol (47–76%), stigmasterol (12–23%) and campesterol (7–12%). The stigmasterol/campesterol ratio (1.2:2.3) was lower in mango kernel fat than in cocoa butter. Among the 4-methyl sterol fractions, gramisterol, lophenol, obtusifoliol and citrostadienol were tentatively identified by GLC. Lupeol, cycloartenol,α- andβ-amyrins and friedelinol were tentatively identified by GLC in the triterpene alcohols fractions.     

Plasma and lipoprotein fatty acid composition in glycogen storage disease type I

Nocturnal intragastric feeding has been shown to be an effective means to improve clinical and biochemical features in glycogen storage disease type I (GSD-I). In this study, we investigated the fatty acid patterns in a whole plasma and in circulating lipoproteins in patients on this therapy. The results demonstrated massive concentration of total fatty acids coupled with higher levels of triglycerides, free cholesterol, cholesterol ester and phospholipids. This hyperlipidemia involved all fatty acids without distinction of carbon or bond numbers. However, the increase was more pronounced for saturated than polyunsaturated fatty acids, as was demonstrated by the ratios of both oleic acid to linoleic acid (1.91±0.40 vs 0.80±0.09 in controls) and of ω3+ω6 to ω9 fatty acid families (0.92±0.11 vs 1.66±0.08 in controls). The fatty acid patterns in very low (VLDL), low (LDL) and high (HDL) density lipoprotein showed substantial differences in composition, reflecting an association between an abnormal lipoprotein pattern and essential fatty acid deficiency. Furthermore, GSD-I patients exhibited a significant increase in VLDL (17±2 vs 47±7 mg/dl) and LDL cholesterol (124±7 vs 206±24 mg/dl), coupled with a decrease in HDL cholesterol (49±4 vs 28±3 mg/dl). These data documenting high LDL cholesterol and low HDL cholesterol associated with an increased concentration and proportion of saturated fatty acids suggest that GSD-I patients on nocturnal intragastric feeding are at high risk for atherosclerosis and its complications.     

Copper planar microcoils applied to magnetic actuation

Recent advances in microtechnology allow realization of planar microcoils. These components are integrated in MEMS as magnetic sensor or actuator. In the latter case, it is necessary to maximize the effective magnetic field which is proportional to the current passing through the copper track and depends on the distance to the generation microcoil. The aim of this work was to determine the optimal microcoil design configuration for magnetic field generation. The results were applied to magnetic actuation, taking into account technological constraints. In particular, we have considered different realistic configurations that involve a magnetically actuated device coupled to a microcoil. Calculations by a semi-analytical method using Matlab software were validated by experimental measurements. The copper planar microcoils are fabricated by UV micromoulding on different substrates: flexible polymer (Kapton^®) and silicate on silicon. They are constituted by a spiral-like continuous track. Their total surface is about 1 mm².     

Unsupervised and simultaneous training of multiple object detectors from unlabeled surveillance video

Object detection is an essential component in automated vision-based surveillance systems. In general, object detectors are constructed using training examples obtained from large annotated data sets. The inevitable limitations of typical training data sets make such supervised methods unsuitable for building generic surveillance systems applicable to a wide variety of scenes and camera setups. In our previous work we proposed an unsupervised method for learning and detecting the dominant object class in a general dynamic scene observed by a static camera. In this paper, we investigate the possibilities to expand the applicability of this method to the problem of multiple dominant object classes. We propose an idea on how to approach this expansion, and perform an evaluation of this idea using two representative surveillance video sequences.     

In-plane rigid-body vibration mode characterization with a nanometer resolution by stroboscopic imaging of a microstructured pattern

This article introduces an improved approach for the characterization of in-plane rigid-body vibration, based on digital processing of stroboscopic images of the moving part. The method involves a sample preparation step, in order to pattern a periodic microstructure on the vibrating device, for instance, by focused ion beam milling. An image processing method has then been developed to perform the optimum reconstruction of this a priori known object feature. In-plane displacement and rotation are deduced simultaneously with a high resolution (10-2 pixel and 0.5 x 10(-3) rad, respectively). The measurement principle combines phase measurements-that provide the high resolution-with correlation-that unwraps the phase with the proper phase constants. The vibration modes of a tuning fork are used for demonstrating the capabilities of the method. For applications allowing the sample preparation, the proposed methodology is more convenient than common interference methods or image processing techniques for the characterization of the vibration modes, even for amplitudes in the nanometer range.     

Fracture mechanisms and failure processes at stiffener run-outs in polymer matrix composite stiffened elements

This paper describes the fractographic analyses of three stringer run-out designs which had been loaded to failure in tension. The main aims of the investigation were to deduce the failure processes in the elements, and to characterise the effect of local geometry of the stringer run-out on the failure process. The analysis showed that the critical failure mechanism in the elements was the development of +45° ply splitting at the skin surface, initially under mode I dominated intralaminar fracture. However, as these splits grew beneath the stringer foot, the mode II component increased. This led to mixed-mode delamination growth, extending parallel to the +45° ply, at the skin/adhesive interface. Subsequently, the delamination migrated through the skin via ply splits, ultimately reaching the interface between the second and third (−45°/0°) plies, in which it remained until catastrophic failure.

Extending and tapering the stringer foot led to shifting of the site of the +45° ply splitting; this was attributed to in-plane tensile stresses in the skin being inhibited in the modified designs. The reduced out-of-plane support on the stiffener foot in the modified designs led to an increase in the mode I component at the delamination from the stringer tip. It also led to an increase in the degree of multi-plane delamination growth. Based on the fractographic observations, recommendations for modelling the elements were suggested.     

Development of an experimentally validated semi-empirical fully-coupled performance model of a PEM electrolysis cell with a 3-D structured porous transport layer

A semi-empirical non-isothermal model incorporating coupled momentum, heat and mass transport phenomena for predicting the performance of a proton exchange membrane (PEM) water electrolysis cell operating without flow channels is presented. Model input parameters such as electro-kinetics properties and mean pore size of the porous transport layer (PTL) were determined by rotating disc electrode and capillary flow porometry, respectively. This is the first report of a semi-empirical fully coupled model which allows one to quantify and investigate the effect of the gas phase and bubble coverage on PEM cell performance up to very high current densities of about 5 A/cm². The mass transport effects are discussed in terms of the operating conditions, design parameters and the microstructure of the PTL. The results show that, the operating temperature and pressure, and the inlet water flowrate and thickness of the PTL are the critical parameters for mitigating mass transport limitation at high current densities. The model presented here can serve as a tool for further development and scale-up effort in the area of PEM water electrolysis, and provide insight during the design stage.