Post-Weld Heat Treatment of Additively Manufactured Inconel 718 Welded to Forged Ni-Based Superalloy AD730 by Linear Friction Welding

A new post-weld heat treatment (PWHT) cycle was designed for novel dissimilar linear friction welding (LFW) of selective laser melted (SLM) Inconel 718 (IN718) to AD730 forged nickel-based superalloy. The microstructure and hardness of the joints after the PWHT are investigated and compared with those of as-linear friction welded samples. The precipitation of γ′ + γ″ is determined as the main mechanism to increase the mechanical properties of SLM IN718 alloy. These particles coarsened during heat treatment at 1253 K and double aging. The results show that the thermomechanical history of linear friction welded joints can affect the microstructure of IN718 alloy such as the morphology of δ phase after solution treatment (ST) from the platelike in the weld zone (WZ) to the needlelike in the base material (BM). It was found that in AD730, nanometric size γ′ particles reprecipitated close to the weld line during rapid cooling after welding. The presence of ultrafine γ′ particles and coarsening of the remaining particles in the microstructure of the alloy, during PWHT, can enhance the strength and hardness. The developed PWHT resulted in uniform hardness across the new dissimilar joint.

     

Modeling nitrate fluxes at the catchment scale using the integrated tool CAWAQS

Nitrates fluxes in the Grand Morin basin (1200 km(2)), that is subjected to intense agricultural pressure, are considered using in-stream observations (around 250 sampling days over 5 years) and physically based simulations using the CAWAQS model (CAtchment WAter Quality Simulator). In-stream nitrate concentration averaged 6 mg N L(-1), increasing by approximately 0.2 mg N L(-1) yr(-1) around this value (period 1991-1996). Our results show that, over the period of 1991-1996, the differences between in-stream observed nitrate concentrations and simulated nitrate concentrations result from nitrate losses at the basin scale. These losses are due to denitrification by transfer through wetlands, alluvial plains, the hyporheic zone, and by benthic processes in rivers. A mean annual mass balance at the basin scale indicates that 40% of the infiltration flux (3360 kg N km(-2) yr(-1)) is removed from the system via the river network, 40% is stored in aquifers and 20% is lost by denitrification (period 1991-1996).     

SAPHO syndrome and aseptic osteitis

Hepatitis B core antigen has been intensively studied. Recently, cryoelectron microscopy studies have determined the structure of human and duck hepatitis B virus nucleocapsids at low resolution. Both viruses assemble into core particles of two sizes with icosahedral dimer-clustered T = 3 and T = 4 symmetries. Both capsids present tightly clustered dimers composed of a shell and a protruding domain. The present work introduces a model for HBc folding, dimer formation, and assembly. The model is based in multiple alignments of HBc sequences from 20 mammalian and avian isolates and secondary structure predictions. The 54% alpha-helical conformation predicted is in good agreement with CD results reporting 53-71% content of alpha-helices. Despite the sequence divergence of mammalian and avian proteins, the secondary structure prediction of both shows a high degree of coincidence, according to the multiple sequence alignment. The proposed fold of HBc monomers is built from five alpha-helices. In dimers, pairs of two of those helices conform the protruding domain. The model also suggests the convergence of the region preceding the protamine domain around the sixfold symmetry axes. The model gives answers to most of the standing questions concerning the nucleocapsid assembly and antigenic behavior of HBc protein.     

Contribution of calcaneal ultrasonic assessment to the evaluation of postmenopausal and glucocorticoid-induced osteoporosis

Inflammatory cytokines have been described to play a critical role in the orientation and amplification of the IgA immune response. In this study, we show that the intranasal administration of a Bordetella pertussis strain expressing the protective antigen glutathione-S-transferase of Schistosoma mansoni (Sm28GST) induced an inflammatory response in the lungs of mice, characterized by the production of inflammatory cytokines, such as Tumor Necrosis Factor alpha, Interleukin-6 and Transforming-Growth Factor beta. The production and the secretion of these cytokines in lung tissues were early and transient. Their presence was observed only during the first week after administration despite the persistence of the bacteria for 1 month. Two weeks after inoculation, Interleukin-10 secretion was detected in the lungs, which could explain the decrease in the production of inflammatory cytokines. These inflammation-regulating cytokines, induced in the lungs by the presence of the bacterial vector, could be part of the process generating the local immune response, in particular the anti-Sm28GST IgA response.     

Immune functions in beluga whales (Delphinapterus leucas): evaluation of phagocytosis and respiratory burst with peripheral blood leukocytes using flow cytometry

Flow cytometric assays using peripheral blood were developed to study phagocytosis and respiratory burst, the two major functions of neutrophils and among the most important non-specific defense mechanisms, in beluga whales. The use of flow cytometry avoids the problems associated with the isolation and purification of different cell types, and allows the measurement of a large number of cells (10,000) in a very short period of time. The methods described will be used to compare these functions in blood samples from highly contaminated beluga whales from the St. Lawrence and from relatively clean arctic beluga whales.     

Is bone turnover a determinant of bone mass in rheumatoid arthritis?

OBJECTIVE: The aim of this study was to measure ultrasound (US) densitometric parameters [Broadband Ultrasound Attenuation (BUA), Speed of Sound (SOS), and stiffness of the os calcis] in patients with inflammatory bowel disease (IBD) and to compare the results with those obtained with conventional x-ray absorptiometry (DXA) of the lumbar spine. METHODS: Twenty-two patients with Crohn's disease (13 with ileal and nine with ileocolonic disease), 11 patients with ulcerative colitis (eight with left-sided and three with pancolitis), and 18 healthy controls. US densitometry of the right heel and DXA of the lumbar spine were performed within the same day. RESULTS: Compared to controls, IBD patients had significantly lower values with both methods, US and DXA. Forty-nine percent of patients had a lumbar T score below -1. Calcaneal SOS and stiffness of these patients were significantly reduced (p < 0.03 and p < 0.05, respectively). Positive significant correlations were found between lumbar DXA and calcaneal US parameters. Lumbar bone density and calcaneal US stiffness correlated inversely with the lifetime prednisone intake (p < 0.03 andp < 0.05, respectively), but not with age or duration of disease. A cut-off level of 80 dB/MHz for calcaneal BUA predicted axial osteopenia correctly in 74%, but some underestimation of spinal BMD was observed, especially in female patients with Crohn's disease. CONCLUSION: US evaluation of the os calcis gives results similar to those of conventional DXA and therefore may be used for screening IBD patients for axial osteoporosis. Because US does not expose patients to radiation, repeated measurements are possible and may be used to assess short term variations and the effect of treatment of IBD-associated bone disease.     

Lack of suppressive effects of mixtures containing low levels of methylmercury (MeHg), polychlorinated dibenzo-p-dioxins (PCDDS), polychlorinated dibenzofurans (PCDFS), and aroclor biphenyls (PCBS) on mixed lymphocyte reaction, phagocytic, and natural killer cell activities of rat leukocytes in vitro

Rat splenocyte mixed leukocyte reaction (MLR), splenic natural killer (NK) cell activity, and phagocytic activities of splenic, peritoneal, and peripheral blood leukocytes (PBLs) were evaluated in vitro to determine the immunotoxicity of mixtures containing low levels of methylmercury (MeHg), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and Aroclor polychlorinated biphenyls (PCBs). The mixtures were based on the concentrations of the chemicals in fish flesh. Leukocytes from male Fischer rats were exposed to MeHg (0.1-2 microg/ml), PCDD/PCDF mixtures (1-15 pg/ml) of three PCDDs (2,3,7,8-tetrachlorodibenzo-p-dioxin, 1,2,3,7,8-pentachlorodibenzo-p-dioxin, and 1,2,3,4,7,8-hexachlorodibenzo-p-dioxin) and two PCDFs (2,3,7,8-tetrachlorodibenzofuran and 1,2,3,7,8-pentachlorodibenzofuran), three Aroclor PCB (Aroclor 1242, 1254, and 1260) mixtures (0.01-0.5 microg/ml), or combinations of MeHg/PCB/PCDD/PCDF mixtures for 24 or 72 h before immunological assays. Phagocytosis and NK cell cytotoxicity were evaluated with a flow cytometer, and MLR of Fischer rat responder splenocytes cultured with mitomycin C-treated Long-Evans splenocytes by [3H]thymidine uptake. Exposure to MeHg (2 microg/ml) alone or with PCB/ PCDD/PCDF resulted in significant cytolethality in rat splenocytes, peritoneal leukocytes, and PBLs at 24 h exposure. Treatment with Aroclor PCB mixtures, PCDD/PCDF mixtures, 0.1 microg MeHg/ml (noncytolethal), or PCB/PCDD/PCDF mixtures with 0.1 microg MeHg/ml caused no suppression of splenocyte MLR response, splenic NK cell-mediated lysis of Yac-l cells, or phagocytosis of fluorescent beads by splenic, peritoneal, and peripheral blood phagocytic cells. The results indicate that in vitro exposure of rat leukocytes to low levels of MeHg, Aroclor PCB mixtures, PCDD/PCDF mixtures, or MeHg/PCB/PCDD/PCDF mixtures had no suppressive effects on the immune functions assayed, and thus produced no additive immunotoxicity. However, in order to predict the potential risk of these chemical mixtures to the human immune system, in vivo animal studies with blood (tissue) levels compatible with the levels of MeHg, PCBs, and PCDDs/PCDFs in exposed human populations should be evaluated.     

Pneumocystis carinii pneumonia in rheumatoid arthritis patients treated with methotrexate. A report of two cases

OBJECTIVE: The induction and repair of DNA single-strand breaks (SSBs) were measured in primary cultured infant rat lens epithelial cells (RLECs) following hydrogen peroxide (HP) exposure, and the influential factors were detected. METHODS: Utilizing nick translation methodology which utilizes incorporation of labeled nucleotides at the sites of DNA SSBs to sensitively quantitate the damage, we studied the effects of temperature, doses of HP and trace amount of selenium on cell survival. RESULTS: The number of DNA SSBs at 37 degrees was higher than that at 4C (P < 0.01). Significant numbers of SSBs were detected after being insulted by as low as 36.4 mumol/L hydrogen peroxide for 12 minutes 4 degrees (P < 0.05). Repair rapidly initiated and almost completed in 60 minutes after mild damage, and it was unable to repair when the DNA damage was induced by HP at toxic concentration. Trace selenium was added to the culture and incubated for 24 hours, then the number of SSBs was significantly decreased (P < 0.01). CONCLUSIONS: At 37 degrees HP may induce DNA SSBs in RLECs. HP induces the SSBs in a dose dependent manner. The DNA SSBs can not be repaired after severe damage. Trace selenium can decrease the degree of susceptibility to oxidative damage in infant RLECs.     

3D modelling of Ti–6Al–4V linear friction welds

Linear friction welding (LFW) is a solid-state joining process that significantly reduces manufacturing costs when fabricating Ti–6Al–4V aircraft components. This article describes the development of a novel 3D LFW process model for joining Ti–6Al–4V. Displacement histories were taken from experiments and used as modelling inputs; herein is the novelty of the approach, which resulted in decreased computational time and memory storage requirements. In general, the models captured the experimental weld phenomena and showed that the thermo-mechanically affected zone and interface temperature are reduced when the workpieces are oscillated along the shorter of the two interface contact dimensions. Moreover, the models showed that unbonded regions occur at the corners of the weld interface, which are eliminated by increasing the burn-off.     

On the Occurrence of Liquation During Linear Friction Welding of Ni-Based Superalloys

A combination of experimental and analytical methods was used to study the possible occurrence of liquation during LFW of the newly developed AD730^TM Ni-based superalloy. LFWed joints were produced using a semi-industrial size facility and the interfaces of the joints as well as the ejected flash were examined using optical and Field Emission Gun Scanning Electron Microscopy (FEG-SEM). Physical simulation of the LFW thermal cycle, using thermomechanical simulator Gleeble™ 3800, showed that incipient melting started from 1473 K (1200 °C). The analytical model, calibrated by experiments, predicted that the highest temperature of the interface was about 1523 K (1250 °C). The constitutive equations based on lattice and pipe diffusion models were developed to quantify the self-diffusivity of the elements and control the extent of liquation by considering the effect of LFW process parameters. Analytical results show that the application of compressive stresses during LFW results in 25 times increase in the diffusion of Ni atoms at the weld interface. Therefore, no presence of re-solidified phases, i.e., occurrence of liquation, was observed in the microstructure of the weld zone or the flash in the present study. Based on the obtained results, a methodology was developed for designing the optimum pressure above which no liquation, and hence cracking, will be observable.