Hierarchical micro-nanostructured albite-based glass-ceramic for high dielectric strength insulators

A novel glass-ceramic material based on albite type Na-rich feldspar has been synthesized by conventional ceramic process. High crystallinity, >94%?Vol.% is obtained by fast sintering which allows energy saving processing. Albite is the main crystalline phase and tetragonal SiO₂ is a secondary phase. Electrical properties were examined by complex impedance, DC measurements, and dielectric breakdown test. Dielectric characterization shows a non-Debye type dielectric behavior with low dielectric constant, 4.6 at 1?MHz, low dielectric losses, (～10^?3 at 1?MHz, and a large dielectric strength, ～60?kV/mm), that it is the largest value reported in ceramic insulators. Those dielectric properties are attained by the low glassy phase content in the samples and their unique micro-nanostructure. All these properties make this novel material a very promising candidate in the market of ceramic electrical insulator, highlighting for high-voltage applications.     

Characterization of the reactivity of limestones with SO2 in a fluidized bed reactor

The reaction between SO₂ and calcined limestone particles has been studied in a fluidized bed combustor. Measurements of sorbent reactivity with SO₂ were made for small batches of limestone injected into the combustor. Simultaneous continuous combustion of bituminous coal provided conditions like those of a boiler for study of the sulphation reaction. A semi-empirical rate model of the CaO-SO₂ reaction has been developed. External mass transfer of SO₂, diffusion within the particles and chemical reaction are taken into account. The limestone reactivity with SO₂ is characterized by two parameters which are dependent on the temperature and sorbent particle size. A model for predicting the limestone requirements in a fluidized bed boiler has been developed. Parameters from the batch experiments are included. The predictions for sulfur retention agree with the experimental results. In addition, effects of operating conditions (gas velocity, recycle, limestone particle size) on the retention of SO₂ were simulated using the model.     

A SIMPLE METHOD FOR STUDYING THE KINETICS OF GAS-SOLID REACTIONS IN A FLUIDIZED BED REACTOR

A methodology for studying the kinetics of gas-solid reactions in a fluidized bed reactor is presented. This procedure is based on the analysis of the response of the system (flue gases) when batches of solids of different weight are added to the reactor. The method has been applied to the study of limestone particle calcination. The calcination rate constants obtained are in good agreement with those found in the literature. The method offers the advantage of simplicity and avoids the use of model assumptions or empirical correlations.     

Manganese ferrite nanoparticles synthesized through a nanocasting route as a highly active Fenton catalyst

Spinel ferrite MnFe₂O₄ nanoparticles were synthesized by means of a nanocasting technique using a low-cost mesoporous silica gel as a hard template. The magnetic nanoparticles, of <10 nm diameter and with a surface area of around 100 m²/g, were tested as a heterogeneous Fenton catalyst for the decomposition of hydrogen peroxide under neutral and basic conditions. This catalyst shows a much higher activity than previous heterogeneous catalysts reported in the literature, which is mainly ascribed to its small particle size. Furthermore, the magnetic catalyst can be easily separated from the reaction medium by means of an external magnetic field. The effects of residual silica and the purity of the catalyst (hematite formation) on catalytic activity have been studied and correlated. The results obtained show this catalyst to be a suitable candidate for the removal of pollutants in wastewaters by means of the Fenton heterogeneous reaction.     

Decision support system for classifying archaeological pottery profiles based on Mathematical Morphology

We present a decision support system to help archaeologists in classifying wheel-made pottery pieces by its profile. A novel shape characterization method, using Mathematical Morphology, is introduced for this purpose. Each profile is represented as a vector, obtained by sampling the so called morphological curves (erosion, dilation, opening and closing), and Euclidean Distance is used as a similarity measure. We show results of our method applied to a profile database of Iberian Pottery from the upper valley of Guadalquivir River (Spain).     

Von Willebrand disease: characteristics and response to desmopressin. Study of 103 cases

BACKGROUND: To describe the main characteristics and response to desmopressin infusion in 103 patients suffering from von Willebrand disease (vWD). PATIENTS AND METHODS: The criteria for diagnosis were (except for type 2N) the coexistence of von Willebrand factor ristocetin cofactor (vWF:RCo) activity < 50 U/dl with bleeding disease or one of the following data: von Willebrand factor antigen (vWF:Ag) activity < 50 U/dl, factor VIII (FVIII) activity < 50 U/dl or the existence of a increased bleeding time (BT). Multimeric studies of vWF were performed in 51 cases and ristocetin induced platelet aggregation (RIPA) was also performed. RESULTS: Spontaneous bleeding was found in 36 patients, while in 18 cases the diagnosis was done after surgical bleeding. Thirteen patients (6 presenting with mild bleeding) were studied for abnormalities in the routine preanestesic tests. Other 22 patients were diagnosed with vWD by familial studies. There were 3 patients with type 2B, 1 case with type 2N and other patient with type 3. BT was found increased in 26 out of 58 patients. The activities of vWF:CoR and vWF:Ag were 38.4 (9.4) U/dl and 45.8 (23.2) U/dl, respectively, while the activity of FVIII was 49.9 (20.8) U/dl. Prophylactic DDAVP (desmopressin) was infused in 32 patients. After 1 h, basal activities of vWF:CoR and vWF:Ag were increased by 3.1 (3.2) and 3.4 (3.1) times, respectively, and maintained for 3 h. FVIII activity increased 3.6 (2.3) times the basal levels decreasing after 3 h (2.9 [2.1]; p < 0.01). The BT was corrected in 8 out of ten patients. CONCLUSIONS: vWD is a major cause of surgical bleeding. Preanestesic anamnesis and coagulation tests can be useful to identify vWD. Many patients with vWD have normal BT. A failure in the response to desmopressin infusion is unusual.     

Cellular Uptake, DNA Binding and Apoptosis Induction of Cytotoxic Trans-[PtCl(2)(N,N-dimethylamine)(Isopropylamine)] in A2780cisR Ovarian Tumor Cells

Trans-[PtCl(2)(N,N-dimethylamine)(isopropylamine)] is a novel trans-platinum compound that shows cytotoxic activity in several cisplatin resistant cell lines. The aim of this paper was to analyse, by means of molecular cell biology techniques and total reflection X-ray fluorescence (TXRF), the cytotoxic activity, the induction of apoptosis, the cellular uptake and the DNA binding of trans-[PtCl(2)(N,N-dimethylamine)(isopropylamine)] in the cisplatin resistant cell line A2780cisR. The results show that this drug is more cytotoxic and induces a higher amount of apoptotic cells than cisplatin in A2780cisR cells. However, the intracellular accumulation and extent of binding to DNA of trans-[PtCl(2)(N,N-dimethylamine)( isopropylamine)] is lower than that of cis-DDP. Moreover, trans-[PtCl(2)(N,N-dimethylamine)(isopropylaminae)] is partially inactivated by intracellular levels of glulathione. The result suggest that circumvention of ciplatin resistance by trans-[PtCl(2)(N,N-dimethylamine)(isopropylamine)] in A2780cisR cells might be related with the ability of this drug to induce apoptosis.     

Absolute-Type Shaft Encoding Using LFSR Sequences With a Prescribed Length

Maximal-length binary sequences have existed for a long time. They have many interesting properties, and one of them is that, when taken in blocks of n consecutive positions, they form 2ⁿ - 1 different codes in a closed circular sequence. This property can be used to measure absolute angular positions as the circle can be divided into as many parts as different codes can be retrieved. This paper describes how a closed binary sequence with an arbitrary length can be effectively designed with the minimal possible block length using linear feedback shift registers. Such sequences can be used to measure a specified exact number of angular positions using the minimal possible number of sensors that linear methods allow.     

Experimental evaluation of slack management in real-time control systems: Coordinated vs. self-triggered approach

Effective slack management, i.e., management of unused computing resources, for real-time control tasks mandates to redistribute the available resources between controllers as a function of the state of the controlled plants. Slack can be allocated to control tasks to alter their rate of progress via e.g., the controllers’ period, in order to adapt their behavior to changes in the computing platform and in the environment. This paper presents an experimental evaluation of two representative slack redistribution policies for multitasking real-time control systems: “coordinated” vs. “self-triggered”. In the coordinated policy a resource manager is responsible for modifying each control task progress. Alternatively, in the self-triggered policy, each control task decides its progress. The demands that each policy poses to the computing platform are analyzed and different operating system architectures providing flexibility and adaptivity are discussed. A proof-of-concept implementation including the real-time control of three double integrator plants in the form of electronic circuits is presented, and a complete performance analysis is reported.