Photoelectrochemistry of poly(3-methylthiophene), I: Surface morphology and thickness effect

Photocyclovoltammetric experiments with films of poly(3-methylthiophene) under polychromatic light irradiation show a p-type semiconductor behavior in the reduced state, with a flat band potential of 0.18 V. The photocurrent depends on film thickness and surface morphology. Films with different thickness were characterized by scanning electron microscopy, indicating a globular morphology with globule sizes changing according to the charge density used during polymer deposition. The highest photocurrent is observed for the lowest globule diameter. These films were also irradiated with monochromatic light from the electrolyte side and from the substrate side. A higher photocurrent and a photocurrent spectrum matching the absorption spectrum of the reduced form of the polymer is observed on irradiation from the electrolyte side of a 0.7 μm thick film. In contrast, for irradiation from the electrode side, the photocurrent is lower and the spectrum shows a peak at lower energy. These results were interpreted in terms of a delocalized space charge zone, different kinetics for charge transfer and mass transport across the solvent swollen polymer film and different depth of penetration of the light as a function of wavelength.     

1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine as a substrate of cytochrome P450 2D6: allosteric effects of NADPH-cytochrome P450 reductase

1-Methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP), a neurotoxin that produces Parkinsonism symptoms in man, has been examined as a substrate of recombinant human cytochrome P450 2D6. When cumene hydroperoxide is used as an oxygen and electron donor, a single product is formed, identified as 4-phenyl-1,2,3,6-tetrahydropyridine. The K(m) for formation of this product (130 microM) is in agreement with the dissociation constants for MPTP binding to the enzyme determined by optical and nuclear magnetic resonance (NMR) spectroscopy. When the reaction is carried out with nicotinamide adenine dinucleotide phosphate (reduced) (NADPH) and recombinant human NADPH-cytochrome P450 reductase, a second product, identified as 1-methyl-4-(4'-hydroxyphenyl)-1,2,3,6-tetrahydropyridine, is formed in addition to 4-phenyl-1,2,3,6-tetrahydropyridine. The K(m) values for formation of these two products are 19 microM and 120 microM, respectively. Paramagnetic relaxation experiments have been used to measure distances between the protons of bound MPTP and the heme iron, and these have been used to construct models for the position and orientation of MPTP in the active site. For the cytochrome alone, a single mode of binding was observed, with the N-methyl close to the heme iron in a position appropriate for the observed N-demethylation reaction. In the presence of the reductase, the data were not consistent with a single mode of binding but could be explained by the existence of two alternative orientations of MPTP in the active site. One of these, characterized by a dissociation constant of 150 microM, is essentially identical to that observed in the absence of the reductase. In the second, which has a K(d) of 25 microM, the MPTP is oriented so that the aromatic ring is close to the heme iron, in a position appropriate for p-hydroxylation leading to the formation of the product seen only in the presence of the reductase. In the case of codeine, another substrate for cytochrome P450 2D6, the addition of reductase had no effect on the nature of the product formed, the dissociation constant, or the orientation in the binding site. These observations show that NADPH-cytochrome P450 reductase has an allosteric effect on the active site of cytochrome P450 2D6 that affects the binding of some substrates but not others.     

STI process steps for sub-quarter micron CMOS

This paper presents Shallow Trench Isolation (STI) process steps for sub-1/4 μ CMOS technologies. Dummy active areas, vertical trench sidewalls, excellent gap filling, counter mask etch step and CMP end point detection, have been used for a 0.18 μm CMOS technology. Electrical results obtained with a 5.5 nm gate oxide thickness show good isolation down to 0.3 μm spacing. Good transistor performances have been demonstrated.     

A comparative evaluation of two sensitive serum neutralization tests for bovine herpesvirus-1 antibodies

The need for frequent injections and monitoring, the possibility of multiple gestations, and the higher cost compared to clomiphene citrate, prevents many clinicians from using human menopausal gonadotrophin (HMG) for ovulation induction. A sequential medication regimen, in which HMG is taken after clomiphene, overcomes these problems. We retrospectively compared per cycle fecundity and birth rates in 119 cycles of clomiphene-HMG, 524 cycles of clomiphene alone, 57 cycles of HMG alone, and 79 cycles of concurrent HMG and clomiphene in patients receiving intra-uterine insemination (IUI), who were free of endometriosis or tubal disease. Per cycle fecundity for clomiphene-HMG was 22% [95% confidence interval (CI) 12-34%], double that of clomiphene alone (11%) (95% CI 8-14%) (P < 0.01), and equal to HMG alone (18%) (95% CI 7-29%) or HMG and clomiphene together (19%) (95% CI 10-28%). The multiple birth rate for clomiphene-HMG (7/21) equalled that for HMG alone (3/12) and HMG and clomiphene together (3/8). The average number of ampoules of HMG required [follicle stimulating hormone (FSH) 75 mIU, luteinizing hormone (LH) 75 mIU] was decreased by 65% from 24.5 +/- 1.0 for HMG or HMG and clomiphene together to 8.6 +/- 0.3 for clomiphene-HMG (P < 0.001). Per cycle fecundity was identical when one, two or three ampoules of HMG per day were administered after clomiphene. We conclude that ovulation induction with sequential clomiphene-HMG results in fecundity double that of clomiphene alone and equal to HMG alone or concurrent with clomiphene, thereby reducing the requirement for HMG.