Investigation of thermal residual stresses during laser ablation of tantalum carbide coated graphite substrates using micro-Raman spectroscopy and COMSOL multiphysics

Laser ablation of high-temperature ceramic coatings results in thermal residual stresses due to which the coatings fail by cracking and debonding. Hence, the measurement of such residual stresses during laser ablation process holds utmost importance from the view of performance of coatings in extreme conditions. The present research aims at investigating the effect of laser parameters such as laser pulse energy, scanning speed and line spacing on thermal residual stresses induced in tantalum carbide-coated graphite substrates. Residual stresses were measured using micro-Raman spectroscopy and correlated with Raman peak shifts. Transient thermal analysis was performed using COMSOL Multiphysics to model the single ablated track and residual stresses were reported at low, moderate and high pulse energy regimes. The results showed that the initial laser conditions caused higher tensile residual stresses. Moderate pulse energy regime comprised higher compressive residual stresses due to off centre overlapping of the laser pulses. Higher pulse energy (250 μJ), higher scanning speed (1000 mm/s) and moderate line spacing (20 μm) caused accumulation of tensile residual stresses during the final stage of laser ablation. The deviation of experimental residual stresses from COMSOL numerical model was attributed to unaccounted additional stresses induced during thermal spraying process and deformation potentials in the numerical model.     

Carbon-based TiO2-x heterostructure nanocomposites for enhanced photocatalytic degradation of dye molecules

Application of brown titanium dioxide (TiO_2-x) and its modified composite forms in the photocatalytic decomposition of organic pollutants in the environment is a promising way to provide solutions for environmental redemption. Herein, we report the synthesis of effective and stable TiO_2-x nanoparticles with g-C₃N₄, RGO, and multiwalled carbon nanotubes (CNTs) using a simple hydrothermal method. Among all the as-synthesized samples, excellent photocatalytic degradation activity was observed for RGO-TiO_2-x nanocomposite with high rate constants of 0.075 min^?1_, 0.083 min^?1 and 0.093 min^?1 for methylene blue, rhodamine-B, and rosebengal dyes under UV–Visible light irradiation, respectively. The altered bandgap (1.8 eV) and the large surface area of RGO-TiO_2-x nanocomposite impacts on both absorption of visible light and efficiency of photogenerated charge electron (e^?)/hole (h⁺) pair separation. This resulted in enhanced photocatalytic property of carbon-based TiO_2-x nanocomposites. A systematic study on the influence of different carbon nanostructures on the photocatalytic activity of brown TiO_2-x is carried out.     

Failure to cure Mycobacterium gordonae peritonitis associated with continuous ambulatory peritoneal dialysis

Nontuberculous mycobacteria are increasingly recognized as important pathogens in peritonitis associated with continuous ambulatory peritoneal dialysis (CAPD). Mycobacterium gordonae rarely causes human infection and is the least likely mycobacterium to produce clinical infection in CAPD patients. We describe a patient with persistent M. gordonae peritonitis acquired while undergoing CAPD. During 18 months of treatment, clinical improvement occurred but a microbiological cure could not be achieved. Principles of therapy for mycobacterial peritonitis developing during CAPD are reviewed, and potential explanations for our patient's failure to respond to therapy are discussed.     

The murine immune response to the male-specific antigen mouse testicular cytochrome c

Male and female A/J mice were examined for their ability to elicit T lymphocyte and antibody (Ab) responses to the male-specific Ag, mouse testicular cytochrome c (Mt cyt). T lymphocytes from both male and female mice primed in vivo responded to the Ag in in vitro proliferation assays, and the dose-response curves were statistically indistinguishable. In addition, similar levels of Ab to Mt cyt were observed in immunized male and female mice. The B cells producing the Ab had switched isotypes to IgG1 and IgG2a, indicating that the self-reactive T helper (Th) cells in male mice were functional. Thus, male mice do not appear to be immunologically tolerant to Mt cyt, at least at the Th and B lymphocyte levels. No evidence for disease was found in male mice primed with Mt cyt. Major histocompatibility complex (MHC) class II-positive antigen-presenting cells are present in the testes and these were shown in vitro to process and present Mt cyt to a T cell hybridoma specific for the synthetic peptide Mt cyt 93-104. However, the hybridoma was not activated in the absence of exogenous Mt cyt 93-104 or Mt cyt, indicating that endogenous Mt cyt is not normally processed in sufficient quantity to effectively load MHC class II molecules with this particular Mt cyt-derived peptide. Notwithstanding any immunologic privilege of the testes, the lack of tolerance to Mt cyt and its failure to elicit an autoimmune disease could extend from the low levels of processed Mt cyt Ag available for T cell recognition. The T cell response elicited by Mt cyt contrasts the lack of response to mouse somatic cytochrome c which differs from Mt cyt at 13 amino acid residues and is expressed in most tissues and at higher levels.     

Identification of cysteine pairs within the amino-terminal 5% of apolipoprotein B essential for hepatic lipoprotein assembly and secretion

There is growing evidence that the amino-terminal globular domain of apolipoprotein B (apoB) is essential for lipoprotein particle formation in the hepatic endoplasmic reticulum. To identify the structural requirements for its function in lipoprotein assembly, cysteine (Cys) pairs required to form the seven disulfide bonds within the amino-terminal 21% of apoB were replaced in groups or individually by serine. Substitution of Cys pairs required for formation of disulfide bonds 1-3 or 4-7 (numbered from amino to carboxyl terminus) completely blocked the secretion of apoB28 in transfected HepG2 cells. To identify the specific disulfide bonds required for secretion, Cys pairs were mutated individually. Substitution of Cys pairs required for disulfide bonds 1, 3, 5, 6, or 7 had little or no impact on apoB28 secretion or buoyant density. In contrast, individual substitution of Cys pair 2 (amino acid residues 51 and 70) or 4 (218 and 234) severely inhibited apoB28 secretion and its capacity to undergo intracellular assembly with lipid. The same assembly and secretion defects were observed when these mutations were expressed as part of apoB50. These studies provide direct evidence that the ability of the internal lipophilic regions of apoB to engage in the recruitment and sequestration of lipid during translation is critically dependent upon a structural configuration contained within or affected by the amino-terminal 5% of the protein.     

Pretreatment with somatostatin analog SMS 201-995 potentiates growth hormone (GH) responsiveness to GH-releasing factor in short children

Previous studies in children have shown inconsistent, poorly reproducible GH responses to exogenous GH-releasing factor (GRF), with wide individual variability. In the present study, we tested the hypothesis that prior administration of the long-acting somatostatin analog, SMS 201-995 (SMS), will enhance GH responsiveness to a subsequent GRF challenge. Two study protocols were employed in 37 children with short stature [M = 31, F = 6, ages 11.8 +/- 1.6 yr (mean +/- SEM), height -2.25 +/- 0.55 SDS (SD scores)]. In both studies, each subject served as his/her own control. In the first study, which was designed to determine optimal SMS dose and regimen, SMS, in doses ranging from 0.8-2.2 micrograms/kg sc, was randomly administered or omitted at 0800 h after an overnight fast, and a GRF bolus (50 micrograms, iv) was given 4 h later. In the second study, we employed a protocol identical to study 1 except for the use of standard doses of SMS (1 microgram/kg, sc) and GRF (1 microgram/kg, iv) and an additional 1-h delay of the GRF injection. Plasma GH levels were measured every 20 min from 0800 h until 2 h after the GRF injection in both studies. In study 1 (n = 12; M = 10, F = 2), SMS significantly suppressed spontaneous GH secretion (expressed as the mean +/- SEM GH AUC during the 4-h SMS-GRF interval, AUC 1:2.2 +/- 0.4 vs. 6.2 +/- 0.9 micrograms/L.h; P < 0.001), GH responsiveness to GRF (GH AUC during the 2 h after the GRF injection, AUC 2: 41.5 +/- 7.8 vs. 85.0 +/- 13.5 micrograms/L.h; P < 0.001), and the GH peak response (17.4 +/- 3.1 vs. 36.0 +/- 6.2 micrograms/L; P < 0.001), compared to control tests. In contrast, in study 2 (n = 25; M = 21, F = 4), whereas spontaneous GH secretion was still suppressed during the 5-h SMS-GRF interval (AUC 1:3.8 +/- 0.4 vs. 7.4 +/- 1.1 micrograms/L.h; P < 0.001), both the GH peak response (56.7 +/- 5.5 vs. 30.5 +/- 3.0 micrograms/L; P < 0.0001) and the GH AUC (AUC 2: 103.7 +/- 10.3 vs. 77.5 +/- 6.8 micrograms/L.h; P < 0.05) after GRF administration were significantly augmented by pretreatment with SMS, compared to control tests. Taken together, these results indicate that a priming SMS dose of 1 microgram/kg has a significant permissive effect on GH responsiveness to exogenous GRF administered 5 h later.(ABSTRACT TRUNCATED AT 400 WORDS)     

Processing and microstructure of non-oxide ceramic fibres

Research and development efforts on high-temperature, oxidation-resistant fibres have increased over the past decade due to the demand for light-weight, stiff and strong composite materials in aerospace applications. Varieties of ‘high-performance’, continuous, non-oxide fibres with low-density, high tensile strength and tensile modulus have been developed either from organic precursors or via chemical vapour deposition for fabrication of ceramic matrix composites. Fibres derived from polymer precursors (e.g. Nicalon, Tyranno, HPZ) are small in diameter (compared to CVD monofilaments) and are ideally suited for ceramic composites. Processing, microstructural stability and mechanical properties of these newly developed SiC and Si₃N₄ base fibres are briefly reviewed in this paper.     

Treatment and prognosis of secondary glaucoma in Fuchs' heterochromic iridocyclitis

After reviewing the records of 111 patients with Fuchs' heterochromic iridocyclitis, we studied the therapy and prognosis of secondary glaucoma in 30 of these 111 patients (27%) who had glaucoma or could be considered glaucoma suspects. Maximal medical therapy was unsuccessful in 22 of the 30 patients (73%). Surgical intervention (mostly trabeculectomies, half with 5-fluorouracil) successfully controlled intraocular pressure (< or = 21 mm Hg with or without medication) in 13 of the 18 operated-on patients (72%) after a mean follow-up of 26 months. All successfully operated-on patients retained a visual acuity of 20/80 or better. We had favorable results, possibly because of modern surgical techniques (use of 5-fluorouracil, sodium hyaluronate) or earlier surgical intervention, or both.