Electrospun microporous gelatin–polycaprolactone blend tubular scaffold as a potential vascular biomaterial

The work reported involved the fabrication of an electrospun tubular conduit of a gelatin and polycaprolactone (PCL) blend as an adventitia‐equivalent construct. Gelatin was included as the matrix for increased biocompatibility with the addition of PCL for durability. This is contrary to most of the literature available for biomaterials based on blends of gelatin and PCL where PCL is the major matrix. The work includes the assiduous selection of key electrospinning parameters to obtain smooth bead‐free fibres with a narrow distribution of pore size and fibre diameter. Few reports elucidate the optimization of all electrospinning parameters to fabricate tubular conduits with a focus on obtaining homogeneous pores and fibres. This stepwise investigation would be unique for the fabrication of gelatin–PCL electrospun tubular constructs. The fabricated microfibrous gelatin–PCL constructs had pores of size ca 50–100 μm reportedly conducive for cell infiltration. The measured value of surface roughness of 57.99 ± 17.4 nm is reported to be favourable for protein adhesion and cell adhesion. The elastic modulus was observed to be similar to that of the tunica adventitia of the native artery. Preliminary in vitro and in vivo biocompatibility tests suggest safe applicability as a biomaterial. Minimal cytotoxicity was observed using MTT assay. Subcutaneous implantation of the scaffold demonstrated acute inflammation which decreased by day 15. The findings of this study could enable the fabrication of smooth bead‐free microfibrous gelatin–PCL tubular construct as viable biomaterial which can be included in a bilayer or a trilayer scaffold for vascular tissue engineering. © 2019 Society of Chemical Industry     

Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

Failure to cure Mycobacterium gordonae peritonitis associated with continuous ambulatory peritoneal dialysis

Nontuberculous mycobacteria are increasingly recognized as important pathogens in peritonitis associated with continuous ambulatory peritoneal dialysis (CAPD). Mycobacterium gordonae rarely causes human infection and is the least likely mycobacterium to produce clinical infection in CAPD patients. We describe a patient with persistent M. gordonae peritonitis acquired while undergoing CAPD. During 18 months of treatment, clinical improvement occurred but a microbiological cure could not be achieved. Principles of therapy for mycobacterial peritonitis developing during CAPD are reviewed, and potential explanations for our patient's failure to respond to therapy are discussed.     

The murine immune response to the male-specific antigen mouse testicular cytochrome c

Male and female A/J mice were examined for their ability to elicit T lymphocyte and antibody (Ab) responses to the male-specific Ag, mouse testicular cytochrome c (Mt cyt). T lymphocytes from both male and female mice primed in vivo responded to the Ag in in vitro proliferation assays, and the dose-response curves were statistically indistinguishable. In addition, similar levels of Ab to Mt cyt were observed in immunized male and female mice. The B cells producing the Ab had switched isotypes to IgG1 and IgG2a, indicating that the self-reactive T helper (Th) cells in male mice were functional. Thus, male mice do not appear to be immunologically tolerant to Mt cyt, at least at the Th and B lymphocyte levels. No evidence for disease was found in male mice primed with Mt cyt. Major histocompatibility complex (MHC) class II-positive antigen-presenting cells are present in the testes and these were shown in vitro to process and present Mt cyt to a T cell hybridoma specific for the synthetic peptide Mt cyt 93-104. However, the hybridoma was not activated in the absence of exogenous Mt cyt 93-104 or Mt cyt, indicating that endogenous Mt cyt is not normally processed in sufficient quantity to effectively load MHC class II molecules with this particular Mt cyt-derived peptide. Notwithstanding any immunologic privilege of the testes, the lack of tolerance to Mt cyt and its failure to elicit an autoimmune disease could extend from the low levels of processed Mt cyt Ag available for T cell recognition. The T cell response elicited by Mt cyt contrasts the lack of response to mouse somatic cytochrome c which differs from Mt cyt at 13 amino acid residues and is expressed in most tissues and at higher levels.     

Identification of cysteine pairs within the amino-terminal 5% of apolipoprotein B essential for hepatic lipoprotein assembly and secretion

There is growing evidence that the amino-terminal globular domain of apolipoprotein B (apoB) is essential for lipoprotein particle formation in the hepatic endoplasmic reticulum. To identify the structural requirements for its function in lipoprotein assembly, cysteine (Cys) pairs required to form the seven disulfide bonds within the amino-terminal 21% of apoB were replaced in groups or individually by serine. Substitution of Cys pairs required for formation of disulfide bonds 1-3 or 4-7 (numbered from amino to carboxyl terminus) completely blocked the secretion of apoB28 in transfected HepG2 cells. To identify the specific disulfide bonds required for secretion, Cys pairs were mutated individually. Substitution of Cys pairs required for disulfide bonds 1, 3, 5, 6, or 7 had little or no impact on apoB28 secretion or buoyant density. In contrast, individual substitution of Cys pair 2 (amino acid residues 51 and 70) or 4 (218 and 234) severely inhibited apoB28 secretion and its capacity to undergo intracellular assembly with lipid. The same assembly and secretion defects were observed when these mutations were expressed as part of apoB50. These studies provide direct evidence that the ability of the internal lipophilic regions of apoB to engage in the recruitment and sequestration of lipid during translation is critically dependent upon a structural configuration contained within or affected by the amino-terminal 5% of the protein.     

Pretreatment with somatostatin analog SMS 201-995 potentiates growth hormone (GH) responsiveness to GH-releasing factor in short children

Previous studies in children have shown inconsistent, poorly reproducible GH responses to exogenous GH-releasing factor (GRF), with wide individual variability. In the present study, we tested the hypothesis that prior administration of the long-acting somatostatin analog, SMS 201-995 (SMS), will enhance GH responsiveness to a subsequent GRF challenge. Two study protocols were employed in 37 children with short stature [M = 31, F = 6, ages 11.8 +/- 1.6 yr (mean +/- SEM), height -2.25 +/- 0.55 SDS (SD scores)]. In both studies, each subject served as his/her own control. In the first study, which was designed to determine optimal SMS dose and regimen, SMS, in doses ranging from 0.8-2.2 micrograms/kg sc, was randomly administered or omitted at 0800 h after an overnight fast, and a GRF bolus (50 micrograms, iv) was given 4 h later. In the second study, we employed a protocol identical to study 1 except for the use of standard doses of SMS (1 microgram/kg, sc) and GRF (1 microgram/kg, iv) and an additional 1-h delay of the GRF injection. Plasma GH levels were measured every 20 min from 0800 h until 2 h after the GRF injection in both studies. In study 1 (n = 12; M = 10, F = 2), SMS significantly suppressed spontaneous GH secretion (expressed as the mean +/- SEM GH AUC during the 4-h SMS-GRF interval, AUC 1:2.2 +/- 0.4 vs. 6.2 +/- 0.9 micrograms/L.h; P < 0.001), GH responsiveness to GRF (GH AUC during the 2 h after the GRF injection, AUC 2: 41.5 +/- 7.8 vs. 85.0 +/- 13.5 micrograms/L.h; P < 0.001), and the GH peak response (17.4 +/- 3.1 vs. 36.0 +/- 6.2 micrograms/L; P < 0.001), compared to control tests. In contrast, in study 2 (n = 25; M = 21, F = 4), whereas spontaneous GH secretion was still suppressed during the 5-h SMS-GRF interval (AUC 1:3.8 +/- 0.4 vs. 7.4 +/- 1.1 micrograms/L.h; P < 0.001), both the GH peak response (56.7 +/- 5.5 vs. 30.5 +/- 3.0 micrograms/L; P < 0.0001) and the GH AUC (AUC 2: 103.7 +/- 10.3 vs. 77.5 +/- 6.8 micrograms/L.h; P < 0.05) after GRF administration were significantly augmented by pretreatment with SMS, compared to control tests. Taken together, these results indicate that a priming SMS dose of 1 microgram/kg has a significant permissive effect on GH responsiveness to exogenous GRF administered 5 h later.(ABSTRACT TRUNCATED AT 400 WORDS)     

Treatment and prognosis of secondary glaucoma in Fuchs' heterochromic iridocyclitis

After reviewing the records of 111 patients with Fuchs' heterochromic iridocyclitis, we studied the therapy and prognosis of secondary glaucoma in 30 of these 111 patients (27%) who had glaucoma or could be considered glaucoma suspects. Maximal medical therapy was unsuccessful in 22 of the 30 patients (73%). Surgical intervention (mostly trabeculectomies, half with 5-fluorouracil) successfully controlled intraocular pressure (< or = 21 mm Hg with or without medication) in 13 of the 18 operated-on patients (72%) after a mean follow-up of 26 months. All successfully operated-on patients retained a visual acuity of 20/80 or better. We had favorable results, possibly because of modern surgical techniques (use of 5-fluorouracil, sodium hyaluronate) or earlier surgical intervention, or both.     

Using Web resources to construct multilingual medical thesaurus for cross-language medical information retrieval

Due to the language barrier, non-English users are unable to retrieve the most updated medical information from the U.S. authoritative medical websites, such as PubMed and MedlinePlus. However, currently, there is no any cross-language medical information retrieval (CLMIR) system that can help Chinese-speaking consumers cross the language barrier in finding useful English medical information. A few CLMIR systems utilize MeSH (Medical Subject Headings) to help overcome the language barrier. Unfortunately, the traditional Chinese version of MeSH is currently unavailable.In this paper, we employ a semi-automatic term translation method to construct a Chinese–English MeSH by exploiting abundant multilingual Web resources, including Web anchor texts and search–result pages. Through this method, we have developed a Chinese–English Mesh Compilation System to assist knowledge engineers in compiling a Chinese–English medical thesaurus with more than 19,000 entries. Furthermore, this thesaurus has been used to develop a prototypical system for cross-language medical information retrieval, MMODE, which can help consumers retrieve top-quality English medical information using Chinese terms.