Synthesis of heterocyclic metal complexes and their evaluation as marine antifoulants

4-Amino-3-thio-1,24-triazolidine (L₁) and 4-amino-5-thio-1,3,4-thiadiazole (L_II) as well as their metal complexes of the general formulae ML_I·2H₂O and ML_IICl (M; Pb(II), Cd(II) and Zn(II)) were prepared. With Sn(II), we obtained Sn(L_I)₂·2H₂O and SnL_IICl, respectively. The structures of the compounds were identified through elemental analysis, and IR and UV spectra measurements, in addition to thermal analysis in case of the metal complexes. The antifouling properties of the compounds were tested by their incorporation into paint formulations which were applied to PVC substrates and tested in water from Alexandria western harbour. When the compounds were added at 17·5% by volume, the coated panels were fouled after 3 months of immersion. The addition of 6·7% by volume of tributyltin oxide to 15·8% of the prepared compounds in one formulation elevated the paint efficiency and prevented fouling for 11 months. Paint containing solely tributyltin oxide at the same concentration was inactive against algae.     

Dielectric and mechanical properties of poly(vinyl chloride)–dioctylphthalate systems

The mechanical properties, tensile strength, and elongation were investigated for poly(vinyl chloride) (PVC) samples mixed with dioctylphthalate (DOP) at concentrations from 0 to 100 parts per hundred parts PVC at 23°C. It was found that the tensile strength decreased with the increase of concentration, and the elongation was increased until a concentration of 30 DOP content, and then decreased. This leads to the suggestion that intermolecular plasticization is dominant until 30 DOP content, while interstructural plasticization is prevailing for higher concentrations. The permittivity ε′ and the dielectric loss factor ε″ of the same samples have been measured in the frequency range 10²–10⁵ Hz at temperatures from 3 to 96°C. Results show that as the DOP content increases in PVC, the dielectric absorption becomes broader, and the glass transition temperature T_g is lowered. The magnitude of the loss peak decreases with an increase of DOP content to a minimum at concentrations from 40 to 60 DOP content. At higher concentrations the loss peak is increased and T_g is unaltered. Another absorption was observed at 100 Hz and at high temperatures, which was attributed to Maxwell–Wagner effect or direct current conductivity or both of them. It was found that the sample containing 40 parts DOP in 100 parts PVC possesses the best mechanical and electrical properties.     

Michaelis–Menten kinetics for enzymatic depolymerization of a linear polyester synthesized from Z‐protected glutamic acid

A biodegradable polyester resin was polymerized from N‐benzyloxycarbonyl‐L ‐glutamic acid and ethylene glycol. Rhizopus delemar lipase was used as a biocatalyst for the rupture of ester bonds during the hydrolysis studies. Depolymerization was observed to follow a Michaelis–Menten mechanism, with the maximum rate of monomer formation dP/dt_max = 1.12 × 10⁻⁸ mol/s and the rate constant K_m × 2.03 × 10⁻⁴ mol. Subject to initial conditions described by the most probable distribution and Michaelis–Menten–type depolymerization rate expressions, population density distribution dynamics of the polymeric molecules that formed the resin were explicitly described using a deterministic approach. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 514–520, 2001     

Effects of cobalt and potassium doping on thermal stability and electrical properties of radiation grafted acrylic acid onto poly(tetrafluoroethylene ethylene) copolymer films

Grafted copolymer of poly(tetrafluoroethylene ethylene) (ET) with acrylic acid (AAc) was prepared by direct radiation method. The obtained films were modified by treating with small amounts of Co²⁺ and K⁺ ions (1.0 wt %). The effects of such treatment on the thermal stability and electrical conductivity of these films were studied. Cobalt treatment did not much affect the thermal degradation of the films. The results obtained revealed that k⁺ treatment enhanced the thermal degradation of ET‐g‐PAAc, which started 273 K lower than that observed in the case of the untreated and Co²⁺‐treated films. Potassium and cobalt treatment of the investigated films increased their electrical conductivity (σ) and decreased the activation energy ΔE_σ. The increase in σ values was, however, more pronounced in the case of K⁺‐treated film. These results were discussed in terms of the effective increase in the hydrophilicity of the films, especially those treated with potassium. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 867–871, 2005     

Current Concepts on Genetic Aspects of Mitochondrial Dysfunction in Amyotrophic Lateral Sclerosis

Amyotrophic Lateral Sclerosis (ALS), neurodegenerative motor neuron disorder is characterized as multisystem disease with important contribution of genetic factors. The etiopahogenesis of ALS is not fully elucidate, but the dominant theory at present relates to RNA processing, as well as protein aggregation and miss-folding, oxidative stress, glutamate excitotoxicity, inflammation and epigenetic dysregulation. Additionally, as mitochondria plays a leading role in cellular homeostasis maintenance, a rising amount of evidence indicates mitochondrial dysfunction as a substantial contributor to disease onset and progression. The aim of this review is to summarize most relevant findings that link genetic factors in ALS pathogenesis with different mechanisms with mitochondrial involvement (respiratory chain, OXPHOS control, calcium buffering, axonal transport, inflammation, mitophagy, etc.). We highlight the importance of a widening perspective for better understanding overlapping pathophysiological pathways in ALS and neurodegeneration in general. Finally, current and potentially novel therapies, especially gene specific therapies, targeting mitochondrial dysfunction are discussed briefly.     

Effect of Hanning and Parzen windows and Kalman filter on the spectral analysis of solar constant and solar activities

A comparison was made between the effect of Hanning window (HW) and Parzen window (PW) on the power spectrum analysis of solar constant and solar activities (sunspot and facula). It was found that, the power spectrum density (PSD) using HW was greater than that when PW was used. HW was favorable for the identification of more frequencies which may help in determination of different cycles.

Kalman filter was used and the power spectra were determined before and after filtering to identify the real frequencies.     

Power supplies for plasma column control in the COMPASS tokamak

The main magnetic fields in COMPASS – i.e. The Toroidal, Magnetising, Equilibrium, and Shaping Fields – are created by a set of four corresponding thyristor power supplies controlled in a 0.5 ms loop.The plasma position has to be controlled both radially and vertically by two additional magnetic fields provided by two fast amplifiers (FAs) based on MOSFET technology, each supplying ±100 V and up to ±5 kA.Currently, an ongoing project aims at ELM triggering by fast changes of the vertical position of the plasma column, also referred to as vertical kicks. For this purpose, a new Vertical Kicks Power Supply (VKPS) capable of quick change of vertical plasma position is being constructed. This power supply should operate at up to 1.2 kV with switching frequency up to 5 kHz. It is designed as a H-bridge but based on IGBT transistors which can be operated at higher voltages than MOSFETs.In this paper, we focus on the FAs and VKPS engineering design and required output parameters. Both the power supplies are based on modern components with highest available ratings in their categories. Unique design of the power supplies takes advantage of the short duration of the COMPASS discharge by overloading the transistors above their maximal steady-state rating.The FA is regularly operating, so that in addition to describing its design, we also describe the achieved performance parameters. Finally, the common controller unit, communication, and error handling is described.     

Marine coatings based on metal complexes of 4-amino-3-hydrazino-5-thio-1,2,4-triazole

Copper, cobalt, nickel and tin metal complexes of 4-amino-3-hydrazino-5-thio-1,2,4-triazole (I) have been prepared and their structure identified through IR and electronic spectra measurements. The cobalt and nickel have been found to be octahedral; on the other hand, a mixed structure is proposed for the copper complex. The complexes are incorporated in marine paint formulations in the presenceo of 4-(p-chlorobenzylideneamino)-3-(p-chlorobenzylidenehydrazino)-5-thio-1,2,4-triazole, 4-(3,4-dichlorobenzylideneamino)-3-(3,4-dichlorobenzyl idenehydrazino)-5-thio-1,2,4-triazole and 4-(p-nitrobenzylideneamino)-3-(p-nitrobenzylidenehydrazino)-5-thio-1,2,4-triazole. Each paint was applied to PVC and mild steel substrate and the panels were tested in Alexandria eastern harbour water. Paints containing copper, cobalt and nickel complexes of (I) in the presence of its chlorinated or nitro derivatives showed antifouling properties till about 4 months, while they protect steel substrate from marine corrosion for 1 month.     

Rosemary (<Emphasis Type="Italic">Rosmarinus officinalis</Emphasis>) oil: composition and functionality of the cold-pressed extract

The aim of this work was to investigate cold-pressed rosemary oil (RO) for its lipid classes, subclasses, fatty acid composition, tocochromanols and total phenolics amount. Antiradical activity against 1,1-diphenyl-2-picrylhydrazyl (DPPH^?) and galvinoxyl radicals, antioxidant activity, as measured by the Rancimat test, as well as antimicrobial activity against food-borne bacteria, and dermatophytic fungi of RO were evaluated. In RO, the amount of neutral lipids was highest (ca. 86%), followed by phospholipids (0.92%) and glycolipids (0.88%). The percentages of monounsaturated, polyunsaturated, and saturated fatty acids were 41.7, 42.3, and 15.8%, respectively. Linoleic acid (41.7%) and oleic acid (41.2%) were the major fatty acids while linolenic acid accounted for 1.3% of total fatty acids. The following tocochromanols were detected: α-, β-, γ- and δ-tocopherols, which accounted for 291, 22, 1145, and 41 mg/100 g oil, respectively, as well as α-, β-, γ- and δ-tocotrienols, which accounted for 18, 12, 29, and 158 mg/100 g oil, respectively. RO also contained high levels of phenolic compounds (7.2 mg GAE/g). After 60 min of reaction with free radicals, 67% of DPPH^? and 55% of galvinoxyl radicals were quenched by RO. Rancimat test showed that blending RO with sunflower oil increased the induction period (IP) for blends. The IP of the RO: sunflower oil blend (1:9, v/v) was 390 min, and RO: sunflower oil blend (2:8, v/v) was longer (540 min). RO exhibited high antimicrobial potential against food-borne pathogenic bacteria (E. coli, S. enteritidis, and L. monocytogenes) and high antifungal potential against dermatophyte fungi (T. mentagrophytes, and T. rubrum). RO had unique high level of γ-tocopherol, which is a scavenger of reactive nitrogen species making it a promising material in the food, cosmetic and pharmaceutical applications.