1H T2‐NMR monitoring of crosslinked polyolefin aging

This work examines the correlation between the ¹H‐NMR T₂ relaxation constant and the mechanical properties of aged crosslinked polyolefin cable insulation. T₂ experiments on unswollen samples could not differentiate between unaged and highly aged materials; all exhibited ¹H T₂ constants of approximately 0.5 ms. To accentuate the effects of aging, samples were swollen in various solvents. Unaged samples had T₂ values of approximately 15 ms in good solvents. With thermal aging, T₂ values decreased as the ultimate tensile elongation decreased. However, the correlation between T₂ and elongation differed for samples irradiated with high‐energy radiation and for materials aged above versus below the crystalline melting temperature. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2578–2582, 2003     

Human pathogenic streptococcal proteomics and vaccine development

Gram-positive streptococci are non-motile, chain-forming bacteria commonly found in the normal oral and bowel flora of warm-blooded animals. Over the past decade, a proteomic approach combining 2-DE and MS has been used to systematically map the cellular, surface-associated and secreted proteins of human pathogenic streptococcal species. The public availability of complete streptococcal genomic sequences and the amalgamation of proteomic, genomic and bioinformatic technologies have recently facilitated the identification of novel streptococcal vaccine candidate antigens and therapeutic agents. The objective of this review is to examine the constituents of the streptococcal cell wall and secreted proteome, the mechanisms of transport of surface and secreted proteins, and describe the current methodologies employed for the identification of novel surface-displayed proteins and potential vaccine antigens.     

A Bayesian adaptive dose-finding algorithm for balancing individual- and population-level ethics in Phase I clinical trials

Multiple Bayesian adaptive designs have been proposed for Phase I clinical trials since the continual reassessment method (CRM) was proposed by O’Quigley et al. (1990). Focused on dose-finding in cancer studies, the CRM seeks to allocate new patients to an estimated maximum tolerable dose (MTD). Later, Whitehead and Brunier (1995 Whitehead, J. and Brunier, H. (1995). Continual Reassessment Method: Bayesian Decision Procedures for Dose Determining Experiments, Statistics in Medicine 14: 885–893.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) applied Bayesian decision theory to maximize statistical information for the MTD when allocating new patients. The two allocation rules reflect conflicting perspectives. The CRM emphasizes individual-level ethics, whereas the method of Whitehead and Brunier (1995 Whitehead, J. and Brunier, H. (1995). Continual Reassessment Method: Bayesian Decision Procedures for Dose Determining Experiments, Statistics in Medicine 14: 885–893.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) emphasizes population-level ethics. In the design of a Phase I clinical trial to investigate hyperthermic intraperitoneal chemotherapy (HIPEC) we sought to compromise the two perspectives. To this end, we propose a novel dose allocation design referred to as the balanced information gain method. We first decompose the loss function used by Whitehead and Brunier and then modify it with a tuning parameter that allows a trialist to differentially weigh individual- and population-level ethics based on their particular clinical setting. Simulation studies show that the proposed design provides a reasonable compromise between the distribution of the estimated MTD and the distribution of the number of observed adverse events per trial when compared to the two existing methods.     

Colloidal Processing of Zirconium Diboride Ultra‐High Temperature Ceramics

Colloidal processing of the Ultra‐High Temperature Ceramic (UHTC) zirconium diboride (ZrB₂) to develop near?net‐shaping techniques has been investigated. The use of the colloidal processing technique produces higher particle packing that ultimately enables achieving greater densification at lower temperatures and pressures, even pressureless sintering. ZrB₂ suspension formulations have been optimized in terms of rheological behavior. Suspensions were shaped into green bodies (63% relative density) using slip casting. The densification was carried out at 1900°C, 2000°C, and 2100°C, using both hot pressing at 40 MPa and pressureless sintering. The colloidally processed materials were compared with materials prepared by a conventional dry processing route (cold pressed at 50 MPa) and subjected to the same densification procedures. Sintered densities for samples produced by the colloidal route are higher than produced by the dry route (up to 99.5% relative density by hot pressing), even when pressureless sintering is performed (more than 90% relative density). The promising results are considered as a starting point for the fabrication of complex‐shaped components that can be densified at lower sintering temperatures without pressure.     

HIPed Tailored Hollandite Waste Forms for the Immobilization of Radioactive Cs and Sr

Hot isostatically pressed tailored hollandite waste forms were used to demonstrate the immobilization of Cs and Sr are separable from spent nuclear fuel, as well as Ba and Rb. Four hollandite formulations were investigated, two samples with ∼12 wt% waste loading (on an oxide basis) and two with ∼18 wt% waste loading. Two of the samples were Al-substituted and the other two contained Mg. The hollandite in the Al-substituted samples contained all the waste cations, as designed, but this was not the case in the Mg-substituted samples. The hollandite in the Mg-substituted samples did not contain all the waste cations, with ∼50% of the Sr forming SrTiO₃ as a secondary phase. This resulted in waste forms that were not as durable, with respect to Cs, as their Al counterparts. The formation of SrTiO₃ had little effect on the Sr release rates and was not detrimental to the Mg-substituted hollandite waste form. For the Al-substituted samples, the MCC-1 normalized release rates were <0.06 g·(m²·day)⁻¹ at 0–28 days for all elements, while the Cs release rates remained at 2.0 g·(m²·day)⁻¹ at 0–28 days for the Mg-substituted samples.     

The full cost of high-speed rail: an engineering approach

This paper examines the full costs, defined as the sum of private and social costs, of a high-speed rail system proposed for a corridor connecting Los Angeles and San Francisco in California. The full costs include infrastructure, fleet capital and operating expenses, the time users spend on the system, and the social costs of externalities, such as noise, pollution, and accidents. Comparing these full costs to those of other competing modes contributes to the evaluation of the feasibility of high-speed rail in the corridor. The paper concludes that high-speed rail is significantly more costly than expanding existing air service, and marginally more expensive than auto travel. This suggests that high-speed rail is better positioned to serve shorter distance markets where it competes with auto travel than longer distance markets where it substitutes for air. Received: May 1996 / Accepted in revised form: December 1996     

Copper Oxide Precipitates in NBS Standard Reference Material 482

Copper oxide has been detected in the copper containing alloys of NBS Standard Reference Material (SRM) 482. This occurrence is significant because it represents heterogeneity within a standard reference material that was certified to be homogeneous on a micrometer scale. Oxide occurs as elliptically to spherically shaped precipitates whose size differs with alloy composition. The largest precipitates occur in the Au20-Cu80 alloy and range in size from submicrometer up to 2 μm in diameter. Precipitates are observed using light microscopy, electron microscopy, and secondary ion mass spectrometry (SIMS). SIMS has demonstrated that the precipitates are present within all the SRM 482 wires that contain copper. Only the pure gold wire is precipitate free. Initial results from the analysis of the Au20-Cu80 alloy indicate that the percentage of precipitates is less than 1 % by area. Electron probe microanalysis (EPMA) of large (2 μm) precipitates in this same alloy indicates that precipitates are detectable by EPMA and that their composition differs significantly from the certified alloy composition. The small size and low percentage of these oxide precipitates minimizes the impact that they have upon the intended use of this standard for electron probe microanalysis. Heterogeneity caused by these oxide precipitates may however preclude the use of this standard for automated EPMA analyses and other microanalysis techniques.     

Preliminary evaluation of an SF5+ polyatomic primary ion beam for analysis of organic thin films by secondary ion mass spectrometry

Organic vapor deposited thin films of pure biomolecules, polymer films and biomolecules dispersed in gelatin and biological tissue have been analyzed in a magnetic sector secondary ion mass spectrometer using an SF5+ primary ion beam at keV impact energies. In comparison to Ar+ bombardment under identical conditions, bombardment with SF5+ gives a 10 to 50 fold enhancement in the secondary ion yields for characteristic molecular ions. The SF5+ primary ion beam can be focussed to a small spot allowing molecular ion images to be obtained at micrometer spatial resolution with enhanced sensitivity. More importantly, the decay in molecular ion signal as a function of primary ion dose commonly observed in SIMS using monoatomic primary ions is either eliminated or greatly reduced, allowing molecular depth profiles to be obtained of organic thin films. By continuing to sample intact molecules as sputtering proceeds into the sample, the total number of detected characteristic secondary ions is increased by as much as a factor of approximately 700 for SF5+ bombardment as compared to Ar+ bombardment under identical analytical conditions. This effect is thought to be a result of the high erosion rate and the low penetration depth inherent in the use of a polyatomic primary projectile.     

Community-Based Interventions for Juvenile Firestarters: A Brief Family-Centered Model.

Juvenile firestarting is an especially dangerous and costly problem affecting communities nationwide. The problem of children and fire has stimulated a small but growing research literature on interventions for reducing recidivism among juvenile firestarters. There is little known, however, about which elements of promising interventions are associated with reduced recidivism. The authors review the research literatures on the characteristics of juvenile firestarters and their families and the treatments used to prevent these children from setting fires again, and they describe an integrative theoretical approach to treatment. In addition, a novel, collaborative, family-centered intervention for juvenile firestarters is presented. The importance of using theoretically informed, fire-specific assessment procedures and linking data to treatment conceptualization, planning, and delivery is discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Agent-based computer vision in a dynamic, real-time environment

For computer vision systems to operate in many real-world environments, processing must occur in real-time under dynamic conditions. An agent-based methodology offers an approach to increase flexibility and scalability to accommodate the demands of a real-time, dynamic environment. This paper presents an agent-based architecture that uses a utility optimization technique to guarantee that important vision tasks are fulfilled even under resource constraints. To ensure that the processing of vision tasks is both reliable and flexible, multiple behaviors are utilized to accomplish the vision application's requirements. A vision behavior consists of a grouping of vision algorithms and a set of service levels associated with these algorithms. Utility functions are adopted to evaluate the performance of all possible behaviors that can address the requirements of a vision application within resource constraints. The maximum overall utility corresponds to the optimal behavior. Two example systems using this model are presented to show the applicability of the architecture. Experimental results show that this agent-based architecture outperforms traditional non-agent-based approaches.