Use of recycled copper slag for blended cements

Copper slag is a by‐product generated during smelting to extract copper metal from the ore. The copper slag obtained may exhibit pozzolanic activity and may therefore be used in the manufacture of addition‐containing cements. In this paper the effect of the incorporation of the copper slag in cement is measured. Blends of copper slag with Portland cement generally possess properties equivalent to Portland cement containing fly ash, but very different to the silica fume incorporation. Copper slag and fly ash reduce the heat of hydration more effectively than silica fume in mortars. The replacement of 30% cement by copper slag reduces the flexural and compressive strength in a similar way to fly ash; however, after 28 days, the reduction is less than the percentage of substitution. Hydrated calcium aluminate phases were analysed using scanning electron microscopy (SEM) and X‐ray diffraction (XRD) techniques. The pozzolanic activity of copper slag is similar to that of fly ash and higher than silica fume. In the presence of low water/cement ratios, certain pozzolanic materials produce a very compact cement paste that limits the space available for hydration products, a determining factor in the formation of hydrated calcium aluminates. SEM was found to be a useful analytical technique when aluminates are formed and can be clearly detected by XRD. Copyright © 2008 Society of Chemical Industry     

Ventilatory response to severe acute hypoxia in guinea-pigs and rats with high hemoglobin-oxygen affinity induced by cyanate

Laparoscopic pelvic lymph node dissection has been applied as a minimally invasive staging technique for men with prostate cancer. This procedure has been shown to shorten markedly postoperative hospitalization, decrease analgesic requirements and shorten convalescence period compared to open pelvic node dissection. However, the laparoscopic procedure takes longer to perform and many disposable instruments are used, thus increasing the cost. We determine the overall cost of laparoscopic versus open pelvic lymph node dissection. Between January 1989 and April 1992, 61 men underwent only staging pelvic lymph node dissection for cancer of the prostate at a single university teaching hospital. Of these patients 11 and 50 underwent open and laparoscopic pelvic lymph node dissection, respectively. Information from the hospital business office was reorganized into preoperative, intraoperative and postoperative expenses. All individual charges were transformed up or down to the dollar amounts of the 1990 to 1991 fiscal year so as to correct for inflationary changes. Preoperative costs were not significantly different between the 2 operative approaches. Intraoperative expenses were 52% greater if laparoscopic pelvic lymph node dissection was performed and can be explained by the longer operative times and use of disposable instrumentation. However, the postoperative period lasted an average of 1.61 days following laparoscopic pelvic lymph node dissection. Postoperative nursing and analgesic requirements were significantly more for patients undergoing open pelvic lymph node dissection. The overall postoperative costs following open pelvic lymph node dissection were 280% more expensive than for the laparoscopic procedure. The overall total costs were approximately $1,250 more for laparoscopic pelvic lymph node dissection. Wages lost or earned during this period and rapid return to normal activity following laparoscopic pelvic lymph node dissection would, in our opinion, justify this additional cost.     

Immunoexpression of epidermal growth factor in odontogenesis of the offspring of alcoholic mice

Several forms of cell perturbation have been associated with ethanol ingestion. Fetal alcohol syndrome (FAS) as well as diminished maxillofacial development and inhibition of cell regeneration in vitro and in vivo have been described. Epidermal growth factor (EGF) stimulates maxillofacial growth, DNA synthesis, and it is a potent mitogen for a number of various cell types. EGF exerts its effects on cells through binding to a specific cell surface receptor which leads to activation of a thyrosine kinase in the intracellular part of the receptor. The inhibitory effect of alcohol on EGF in the mouse dental follicle was studied in the offspring of alcoholic mothers using immunocytochemistry. Adult female mice were given 22% alcohol in their drinking water and fed a pelleted diet before and during pregnancy. Maternal blood alcohol levels were 262 +/- 1.3 mg/100 ml on gestation day 12.5. The offspring of the alcoholic and control mice were sacrificed on postnatal day 1.5, their mandibles were dissected, weighed and processed by routine immunocytochemistry with the following results. 1) Significant differences were found in mandible weight p < 0.01 after parturition. 2) The tooth germs in the offspring of ethanol treated mice were morphometrically smaller than those of control littermates. 3) Immunoexpression of EGF in the mandibular first molar of the control group was strong and homogeneous while in the experimental group the expression was light and heterogeneous. It is concluded that maternal alcoholism reduces EGF in the offspring.     

Delayed delivery of surviving triplet after fetal reduction and spontaneous abortion

In multiple pregnancies, survival of remaining fetuses after premature death and delivery of one fetus is uncommon. We report a case of a triplet pregnancy that was reduced to twins at the 14th gestational week and then had preterm premature rupture of membranes and intrauterine fetal death of one twin at the 17th gestational week. To save the surviving fetus, delivery of the dead fetus and ligation of the umbilical cord at the cervical level were performed. We also performed McDonald cervical cerclage to keep the placenta of the dead fetus as well as that of the surviving one in the uterine cavity. After a series of aggressive procedures, including immediate administration of tocolytic agents, and antibiotic prophylaxis to prevent infection and preterm labor, the surviving fetus was delivered vaginally 73 days later due to intractable uterine contractions. After a 10-week hospital stay, the infant boy, weighing 2,500 g, was discharged without any sequelae. To our knowledge, this was the longest interval between deliveries in a triplet pregnancy reported in Taiwan. With adequate intensive management, a satisfactory outcome of the fetus and mother in such cases is possible.     

A finite difference BPM analysis of bent dielectric waveguides

A new version of the scalar TE wave equation is introduced, one that is particularly useful in bent waveguide analysis. The slowly varying envelope equation in cylindrical coordinates for the field amplitude E is finite-differenced, with no other approximations made to it. It will be shown that this version of the equation has several advantages over other forms and gives good results for the power loss rates even at radii ⩽100 μm, as well as being useful for the study of curved structures with varying radii of curvature. Evidence is provided to show that the loss rates calculated from this equation using the two dimensional finite difference beam propagation method compare favorably with other numerical and analytical results found in the literature. Special care must be taken when applying transparent boundary conditions as the curvature increases     

Single stage and double absorption heat transformers used to recover energy in a distillation column of butane and pentane

This paper presents the theoretical analysis of the use of single stage and double absorption heat transformers operating with the water–lithium bromide mixture coupled to a butane and pentane distillation column in a Mexican refinery. A mathematical model of the heat transformers was developed in FORTRAN and integrated as a user model to the Aspen Plus simulation code. Both components coupled to the column were modelled on steady-state conditions. The results show that it is theoretically possible to reduce the energy consumed in the reboiler between 26 and 43% by the use of single stage heat transformer at specific conditions, and between 28 and 33% with double absorption heat transformers for a wide range of operating conditions. Copyright © 2003 John Wiley & Sons, Ltd.     

Cpk index estimation using data transformation

Process capability indices (PCIs) are used in industry to assess percentages of nonconforming parts. An underlying assumption is that the output process measurements are distributed as normal random variables. When normal distributions are assumed, but different distributions are present - such as skew, heavy-tailed, and short-tailed distributions - the percentages of nonconforming parts are significantly different than the computed PCIs indicate. Data arising from nonnormal distributions can sometimes be transformed to conform to the normality assumption and the PCI's computed for the transformed data. In this paper, the effect of the transformation on the estimate of nonconforming parts is examined for three examples of nonnormal distributions - gamma, lognormal, and Weibull. The results of this experimental analysis suggest that data transformation can be useful for estimating an interval for C_pk values and the number of nonconforming parts.