Graded evolution of anisotropic microstructure during sintering from crystal-oriented powder compact

Anisotropic sintering, including shrinkage and grain growth, was examined for c-axis-oriented (Sr,Ca)₂NaNb₅O₁₅ (SCNN) ceramics, which were prepared by colloidal processing under a magnetic field. In the c-axis-oriented SCNN powder compact, shrinkage and grain growth along the c-axis were higher than those along the a-axis. The anisotropic microstructural development was clearly associated with anisotropic sintering shrinkage. X-ray diffraction, scanning electron microscopy, and energy back scattering diffraction showed that the grain growth of oriented particles by including random grains contribute to the development of the oriented microstructure. Finally, the highly crystal-oriented SCNN ceramics with a densified microstructure were obtained through anisotropic sintering. These results clearly showed the potential to develop a well-defined anisotropic microstructure during sintering by designing and controlling the particle packing structure in a powder compact.     

Pilot Plant Study of Simultaneous Sewage Sludge Digestion and Metal Leaching

This research is related to a preindustrial pilot scale study of the performance of the simultaneous sewage sludge digestion and metal leaching (SSDML) process for decontamination and stabilization of sewage sludge. Ten batch tests were carried out in two 4?m3 bioreactors under various conditions of operation. Results indicated that the addition of 1.0 to 1.5?g?S0/L, which is the equivalent of approximately 30 to 50?kg?S0 per tons dry sludge, is sufficient to obtain conditions of acidity (pH<2.5) and oxido-reduction potential greater than 500 mV necessary for an effective solubilization of toxic metals. The final average of metal solubilization in the output sludge during the SSDML process varied in the following ranges: 25–78% Cd, 9–32% Cr, 48–100% Cu, 77–99% Mn, 15–53% Ni, 12–47% Pb, and 66–100% Zn. The N, P, and K contents were also preserved in the decontaminated sludge. Moreover, the use of low concentrations of elemental sulfur makes it possible to obtain decontaminated sludge with a low total sulfur content (1.4–1.5% S) compatible with agricultural use. The suspended solids removal calculated for the SSDML process was slightly lower, (2.5±0.4)% volatile suspended solids per day, than those reached using standard aerobic digestion. Finally, the SSDML process was found to be effective in removing bad odors and in the destruction (99–100%) of indicator bacteria.     

Effects of introduced aspartic and glutamic acid residues on the P'1 substrate specificity, pH dependence and stability of carboxypeptidase Y

Carboxypeptidase Y is a serine carboxypeptidase isolated from Saccharomyces cerevisiae with a preference for C-terminal hydrophobic amino acid residues. In order to alter the inherent substrate specificity of CPD-Y into one for basic amino acid residues in P'1, we have introduced Asp and/or Glu residues at a number of selected positions within the S'1 binding site. The effects of these substitutions on the substrate specificity, pH dependence and protein stability have been evaluated. The results presented here demonstrate that it is possible to obtain significant changes in the substrate preference by introducing charged amino acids into the framework provided by an enzyme with a quite different specificity. The introduced acidic amino acid residues provide a marked pH dependence of the (kcat/Km)FA-A-R-OH/(kcat/Km)FA-A-L-OH ratio. The change in stability upon introduction of Asp/Glu residues can be correlated to the difference in the mean buried surface area between the substituted and the substituting amino acid. Thus, the effects of acidic amino acid residues on the protein stability depend upon whether the introduced amino acid protrudes from the solvent accessible surface as defined by the surrounding residues in the wild type enzyme or is submerged below.     

Muscle transformation of the sartorius muscle in a canine model: clinical impact for electrodynamic graciloplasty as a "neosphincter"

PURPOSE: Transformation of fast-twitching skeletal muscles to slow-twitching, slowly fatigable muscles has become of clinical interest in the recent past. Transposition and transformation of the gracilis muscle to use it as a substitute for a resected or defected anal sphincter (graciloplasty) have been reported as achieving promising results in the treatment of fecal incontinence caused by sphincter defects or following abdominoperineal anorectal excision for cancer. METHOD: This experimental study used a canine model and the sartorius muscle to evaluate the functional efficiency of two different configurations of the muscle loop to compare the presently applied transformation program (8 weeks) with a shorter (5 weeks) protocol. In six beagle dogs, both sartorius muscles were wrapped around two stomas, either in an alpha fashion or in the so-called split-sling technique. Muscle transformation was achieved by controlled neuromuscular stimulation either during eight (Program A) or five weeks (Program B). After completion of the transformation period, the function of the muscle slings was evaluated by manometry, and histomorphologic evaluation of the sartorius muscles was performed. RESULTS: It was shown that muscle transformation led to a slowly fatigable muscle that made it possible to perform continuos (tetanic) contraction, regardless of the configuration or the duration of the transformation. Median pressures created by these muscles also did not differ significantly. In accordance with these functional findings, the histologic evaluation showed the typical, significant increase of Type I fibers in both muscle slings and following both transformation protocols. Although the decrease of fast-twitching Type II fibers was more pronounced following the conventional (8 weeks) program, this finding did not influence the functional results. CONCLUSIONS: Results of our experiment indicate the possibility for using a shorter transformation protocol for transformation of the gracilis muscle during graciloplasty in the clinical setting. Furthermore, the efficacy and safety of the modified (split-sling) wrap technique was demonstrated.     

Multi-functional biochip for medical diagnostics and pathogen detection

We describe a multi-functional biochip (MFB), which uses two different types of bioreceptors, including nucleic acid and antibody probes, on a single platform. The multi-functional capability of the MFB device for biomedical diagnostics is illustrated by measurements of DNA probes specific to gene fragments of Bacillus anthracis and antibody probes targeted to Escherichia coli. Calibration curves for monitoring pathogenic species using antibody probes against E. coli and DNA probes for B. anthracis illustrate the capability of the device for medical diagnostics and for quantitative detection of pathogenic agents.     

Exit effect on hydrodynamics of the internal circulating fluidized bed riser

This is the first time an extensive investigation has been carried out regarding the effects of riser exit geometry on pressure drop and solid behaviour inside the Internal Circulating Fluidized Bed (ICFB) riser, using different riser exit geometries at several operating conditions.The Radioactive Particle-Tracking (RPT) technique was used for solid concentration measurements and solid residence time distribution at the exit zone. Experiments were conducted using Geldart B particles, in the gas superficial velocity range of 4 to 10 m/s. Axial solid hold-up, solid residence time distribution in the exit zone, and the reflux ratio factor k_m, (defined earlier by [E.H. Van der Meer, R.B. Thorpe, J.F. Davidson, Flow patterns in the square cross-section riser of a circulating fluidized bed and the effect of riser exit design, Chem. Eng. Sc. 55 (19) (2000) 4079-4099]), were the main criteria used to investigate the impact of gas-solid separator devices implemented at the ICFB riser exit.Solid residence time distribution results and axial solid hold-up profiles provided clear evidence that the separator device at the riser exit strongly influences the hydrodynamic structure of the ICFB riser. The V-shaped riser exit geometry was found to be the optimum of all the configurations studied.     

程控电流源无需电源支持

工程实验室通常都配有各种电源设备、伏特计、函数信号发生器和示波器。然而．许多这样的工程实验室却缺少电流源。这令人感到非常遗憾，因为电流源有助于生成I-V（电流对电压）曲线，它能对电池进行充放电操作，对电源设备预加负荷，并可实现许多其他的应用。     

Analysis of the Datagram Congestion Control Protocol’s connection management procedures using the sweep-line method

State space explosion is a key problem in the analysis of finite state systems. The sweep-line method is a state exploration method which uses a notion of progress to allow states to be deleted from memory when they are no longer required. This reduces the peak number of states that need to be stored, while still exploring the full state space. The technique shows promise but has never achieved reductions greater than about a factor of 10 in the number of states stored in memory for industrially relevant examples. This paper discusses sweep-line analysis of the connection management procedures of a new Internet standard, the Datagram Congestion Control Protocol (DCCP). As the intuitive approaches to sweep-line analysis are not effective, we introduce new variables to track progress. This creates further state explosion. However, when used with the sweep-line, the peak number of states is reduced by over two orders of magnitude compared with the original. Importantly, this allows DCCP to be analysed for larger parameter values. Somsak Vanit-Anunchai was partially supported by an Australian Research Council Discovery Grant (DP0559927) and Suranaree University of Technology. Guy Edward Gallasch was supported by an Australian Research Council Discovery Grant (DP0559927).     

Prostaglandin synthase-1 and prostaglandin synthase-2 are coupled to distinct phospholipases for the generation of prostaglandin D2 in activated mast cells

Aggregation of IgE cell surface receptors on MMC-34 cells, a murine mast cell line, induces the synthesis and secretion of prostaglandin D2 (PGD2). Synthesis and secretion of PGD2 in activated MMC-34 cells occurs in two stages, an early phase that is complete within 30 min after activation and a late phase that reaches a maximum about 6 h after activation. The early and late phases of PGD2 generation are mediated by prostaglandin synthase 1 (PGS1) and prostaglandin synthase 2 (PGS2), respectively. Arachidonic acid, the substrate for both PGS1 and PGS2, is released from membrane phospholipids by the activation of phospholipases. We now demonstrate that in activated mast cells (i) secretory phospholipase A2 (PLA2) mediates the release of arachidonic acid for early, PGS1-dependent synthesis of PGD2; (ii) secretory PLA2 does not play a role in the late, PGS2-dependent synthesis of PGD2; (iii) cytoplasmic PLA2 mediates the release of arachidonic acid for late, PGS2-dependent synthesis of PGD2; and (iv) a cytoplasmic PLA2-dependent step precedes secretory PLA2 activation and is necessary for optimal PGD2 production by the secretory PLA2/PGS1-dependent early pathway.