Prediction of necking of high strength steel tubes during hydroforming—multi-axial loading

This article studies tubular hydroforming of high strength low alloy (HSLA) and dual phase (DP600) straight tubes under the action of end feeding loads. Experiments demonstrate that higher end feed loads enhance the formability of the tubes and increase the internal fluid pressure for onset of necking and bursting. Because of the action of the internal pressure and the axial compressive load, the onset of localization (necking) is due to a complex three-dimensional state of stress. Using free expansion experiments, approximate upper and lower bound strain-based forming limit curves are determined for the tube materials. These limit curves, in turn, are used to derive upper and lower bound extended stress-based forming limit curves [Simha et al., Prediction of necking in tubular hydroforming using an extended stress-based FLC. Transactions of the ASME Journal of Engineering Materials and Technology 2007;129(1): 36-47]. In conjunction with finite element computations that use solid elements to model the tube, these stress-based limit curves are used to predict upper and lower bound necking pressures under the action of end feed loading. These predictions of necking pressures, when an appropriate coefficient of tube-die friction is used, are found to bracket the experimentally measured necking pressures. Computations using plane stress shell elements to model the tubes are shown to give erroneous results, since the plane stress approximation is not valid when tubes are hydroformed in a die.     

COVID-19 and Lung Mast Cells: The Kallikrein–Kinin Activation Pathway

Mast cells (MCs) have relevant participation in inflammatory and vascular hyperpermeability events, responsible for the action of the kallikrein–kinin system (KKS), that affect patients inflicted by the severe form of COVID-19. Given a higher number of activated MCs present in COVID-19 patients and their association with vascular hyperpermeability events, we investigated the factors that lead to the activation and degranulation of these cells and their harmful effects on the alveolar septum environment provided by the action of its mediators. Therefore, the pyroptotic processes throughout caspase-1 (CASP-1) and alarmin interleukin-33 (IL-33) secretion were investigated, along with the immunoexpression of angiotensin-converting enzyme 2 (ACE2), bradykinin receptor B1 (B1R) and bradykinin receptor B2 (B2R) on post-mortem lung samples from 24 patients affected by COVID-19. The results were compared to 10 patients affected by H1N1pdm09 and 11 control patients. As a result of the inflammatory processes induced by SARS-CoV-2, the activation by immunoglobulin E (IgE) and degranulation of tryptase, as well as Toluidine Blue metachromatic (TB)-stained MCs of the interstitial and perivascular regions of the same groups were also counted. An increased immunoexpression of the tissue biomarkers CASP-1, IL-33, ACE2, B1R and B2R was observed in the alveolar septum of the COVID-19 patients, associated with a higher density of IgE⁺ MCs, tryptase⁺ MCs and TB-stained MCs, in addition to the presence of intra-alveolar edema. These findings suggest the direct correlation of MCs with vascular hyperpermeability, edema and diffuse alveolar damage (DAD) events that affect patients with a severe form of this disease. The role of KKS activation in events involving the exacerbated increase in vascular permeability and its direct link with the conditions that precede intra-alveolar edema, and the consequent DAD, is evidenced. Therapy with drugs that inhibit the activation/degranulation of MCs can prevent the worsening of the prognosis and provide a better outcome for the patient.     

Evaluation of potential interfering agents on in vitro methods for the determination of the antioxidant capacity in anthocyanin extracts

The evaluation of the effects of sugars, metals, acids and other antioxidants on the in vitro antioxidant capacity of purified anthocyanin extract by different techniques was the purpose of this study. Three methods and the ways of expressing their results were evaluated: ABTS_TEAC (capacity equivalent to Trolox, by ABTS (2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulphonic acid))), DPPH_TEAC (capacity equivalent to Trolox, by DPPH (2,2‐diphenyl‐1‐picrylhydrazyl)), DPPH_EC50 (50% reduction in the radical, by DPPH), DPPH_%Sca (reduction in the scavenging capacity, by DPPH), FRAP_TEAC (capacity equivalent to Trolox, by FRAP (reduction power of iron)) and FRAP_EC50 (50% reduction in the radical, by FRAP). The way of expressing DPPH and FRAP results as EC50 showed the greater interfering extent, mainly when the medium contained tartaric and ascorbic acids. The most coherent method was ABTS_TEAC in which only ascorbic acid interfered. Ascorbic acid was shown to interfere in all methods; thus, it must be removed prior to determining the in vitro antioxidant capacity of anthocyanins in food materials.     

A novel pH-responsive hydrogel-based on calcium alginate engineered by the previous formation of polyelectrolyte complexes (PECs) intended to vaginal administration

This work aimed to develop a calcium alginate hydrogel as a pH responsive delivery system for polymyxin B (PMX) sustained-release through the vaginal route. Two samples of sodium alginate from different suppliers were characterized. The molecular weight and M/G ratio determined were, approximately, 107?KDa and 1.93 for alginate_S and 32?KDa and 1.36 for alginate_V. Polymer rheological investigations were further performed through the preparation of hydrogels. Alginate_V was selected for subsequent incorporation of PMX due to the acquisition of pseudoplastic viscous system able to acquiring a differential structure in simulated vaginal microenvironment (pH 4.5). The PMX-loaded hydrogel (hydrogel_PMX) was engineered based on polyelectrolyte complexes (PECs) formation between alginate and PMX followed by crosslinking with calcium chloride. This system exhibited a morphology with variable pore sizes, ranging from 100 to 200?μm and adequate syringeability. The hydrogel liquid uptake ability in an acid environment was minimized by the previous PECs formation. In vitro tests evidenced the hydrogels mucoadhesiveness. PMX release was pH-dependent and the system was able to sustain the release up to 6 days. A burst release was observed at pH 7.4 and drug release was driven by an anomalous transport, as determined by the Korsmeyer–Peppas model. At pH 4.5, drug release correlated with Weibull model and drug transport was driven by Fickian diffusion. The calcium alginate hydrogels engineered by the previous formation of PECs showed to be a promising platform for sustained release of cationic drugs through vaginal administration.     

A Nonparametric Model for Stationary Time Series

Stationary processes are a natural choice as statistical models for time series data, owing to their good estimating properties. In practice, however, alternative models are often proposed that sacrifice stationarity in favour of the greater modelling flexibility required by many real‐life applications. We present a family of time‐homogeneous Markov processes with nonparametric stationary densities, which retain the desirable statistical properties for inference, while achieving substantial modelling flexibility, matching those achievable with certain non‐stationary models. A latent extension of the model enables exact inference through a trans‐dimensional Markov chain Monte Carlo method. Numerical illustrations are presented.     

Parameter optimization for spray-drying microencapsulation of jaboticaba (Myrciaria jaboticaba) peel extracts using simultaneous analysis of responses

The present study aimed to conduct a simultaneous optimization of different carrier agents and temperatures for the production of jaboticaba extracts by spray-drying microencapsulation. The 30% maltodextrin (control), 25% arabic gum + 5% maltodextrin and 25% Capsul™ + 5% maltodextrin carriers were used at air-drying inlet temperatures of 140, 160 and 180 °C. The following responses were evaluated: anthocyanin retention (AR), moisture content (MC), total solids (TS), hygroscopicity (H), overall color difference and antioxidant activity. Scanning electron microscopy (SEM) analysis was also performed. The AR, MC, H and overall color difference parameters were selected for simultaneous optimization by the desirability approach. The results showed that the highest desirability (0.7–0.8) was achieved when 30% maltodextrin was used at 180 °C. According to the SEM analysis, the use of maltodextrin and gum arabic allowed for the formation of more homogeneous particles, which is recommended in spray-drying microencapsulation.     

The Flavonol Quercitrin Hinders GSK3 Activity and Potentiates the Wnt/β-Catenin Signaling Pathway

The Wnt/β-catenin signaling pathway dictates cell proliferation and differentiation during embryonic development and tissue homeostasis. Its deregulation is associated with many pathological conditions, including neurodegenerative disease, frequently downregulated. The lack of efficient treatment for these diseases, including Alzheimer’s disease (AD), makes Wnt signaling an attractive target for therapies. Interestingly, novel Wnt signaling activating compounds are less frequently described than inhibitors, turning the quest for novel positive modulators even more appealing. In that sense, natural compounds are an outstanding source of potential drug leads. Here, we combine different experimental models, cell-based approaches, neuronal culture assays, and rodent behavior tests with Xenopus laevis phenotypic analysis to characterize quercitrin, a natural compound, as a novel Wnt signaling potentiator. We find that quercitrin potentiates the signaling in a concentration-dependent manner and increases the occurrence of the Xenopus secondary axis phenotype mediated by Xwnt8 injection. Using a GSK3 biosensor, we describe that quercitrin impairs GSK3 activity and increases phosphorylated GSK3β S9 levels. Treatment with XAV939, an inhibitor downstream of GSK3, impairs the quercitrin-mediated effect. Next, we show that quercitrin potentiates the Wnt3a-synaptogenic effect in hippocampal neurons in culture, which is blocked by XAV939. Quercitrin treatment also rescues the hippocampal synapse loss induced by intracerebroventricular injection of amyloid-β oligomers (AβO) in mice. Finally, quercitrin rescues AβO-mediated memory impairment, which is prevented by XAV939. Thus, our study uncovers a novel function for quercitrin as a Wnt/β-catenin signaling potentiator, describes its mechanism of action, and opens new avenues for AD treatments.     

Hybridized 4-Trifluoromethyl-(1,2,3-triazol-1-yl)quinoline System: Synthesis,Photophysics, Selective DNA/HSA Bio-interactions and Molecular Docking

The synthesis, structural analysis, and evaluation of the photophysical properties of twelve novel 2-aryl(heteroaryl)-6-(4-alkyl(aryl)-1H-1,2,3-triazol-1-yl)-4-(trifluoromethyl)quinolines ( 6-8 ), where aryl(heteroaryl)=Ph, 4-Me-C₆H₄, 4-F-C₆H₄ and 2- furyl; 4-alkyl(aryl)=−CH₂OH, −(CH₂)₅CH₃ and Ph, are reported. Hybrid scaffolds 6 – 8 were synthesized at 77–95 % yields by regioselective copper-catalysed azide-alkyne cycloaddition (CuAAC) reaction of unpublished 6-azido-4-(trifluoromethyl)quinolines ( 2 ) with selected terminal alkynes ( 3 – 5 ). Azido intermediates 2 were obtained from the reaction of 6-amino-4-(trifluoromethyl)quinolines ( 1 ) and sodium azide at good yields (78–87 %). Compounds 6 – 8 were structurally fully characterized by ¹H−, ¹³C− and ¹⁹F− and ¹H−¹³C 2D-NMR (HSQC, HMBC) spectroscopy, X-ray diffraction (SC-XRD) and HRMS analysis. Moreover, the photophysical properties, DNA- and HSA-binding experiments (bio-interactions), and molecular docking studies for compounds 6 – 8 were performed. These are discussed and compared with similar compounds from recent research.     

Alkydic resin wastewaters treatment by fenton and photo-Fenton processes

Advanced oxidation processes are an emerging option to treatment of the painting industry effluents. The aim of this study was to compare the effectiveness of the Fenton and photo-Fenton processes in chemical oxygen demand (COD), total organic carbon (TOC) and phenolic compounds removal from wastewaters generated during alkydic resins manufacture. The optimized treatment conditions are the following: pH 3.0, 15.15x10(-3)molL(-1) FeSO(4) and 0.30molL(-1) H(2)O(2) for a reaction time of 6h. photo-Fenton experiments were carried out in the presence of sunlight or artificial radiation and complementary additions of H(2)O(2) were made for all experiments. The best results were obtained with photo-Fenton process assisted with solar radiation, with reductions of 99.5 and 99.1% of COD and TOC levels, respectively. Fenton and photo-Fenton (with artificial irradiation) processes presented lower but not insignificant removals, within 60-80% reduction for both COD and TOC. In addition, an excellent removal (95%) of total phenols was obtained using photo-Fenton process assisted with artificial irradiation. This study demonstrated that the use of photo-Fenton process on alkydic resins wastewater treatment is very promising especially when solar light is used.