An investigation of induced voltages to an underground gas pipeline from an overhead transmission line

This paper investigates induced voltage characteristics from an overhead transmission line by applying a method of modeling of induced voltages proposed by the authors. EMTP simulation results obtained by the modeling method agree with analytical results obtained from a well‐known formula. The induced voltages are significantly dependent on the configuration of the overhead line. A horizontal line induces the largest voltage in a gas pipeline, and the voltage induced by a vertical twin‐circuit line is about 20% smaller than that induced by a vertical single‐circuit line. The method is applied to a real pipeline system and the simulation results show reasonable agreement with field test results. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 43–51, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20465     

Analysis of Speaker Adaptation Algorithms for HMM-Based Speech Synthesis and a Constrained SMAPLR Adaptation Algorithm

In this paper, we analyze the effects of several factors and configuration choices encountered during training and model construction when we want to obtain better and more stable adaptation in HMM-based speech synthesis. We then propose a new adaptation algorithm called constrained structural maximum a posteriori linear regression (CSMAPLR) whose derivation is based on the knowledge obtained in this analysis and on the results of comparing several conventional adaptation algorithms. Here, we investigate six major aspects of the speaker adaptation: initial models; the amount of the training data for the initial models; the transform functions, estimation criteria, and sensitivity of several linear regression adaptation algorithms; and combination algorithms. Analyzing the effect of the initial model, we compare speaker-dependent models, gender-independent models, and the simultaneous use of the gender-dependent models to single use of the gender-dependent models. Analyzing the effect of the transform functions, we compare the transform function for only mean vectors with that for mean vectors and covariance matrices. Analyzing the effect of the estimation criteria, we compare the ML criterion with a robust estimation criterion called structural MAP. We evaluate the sensitivity of several thresholds for the piecewise linear regression algorithms and take up methods combining MAP adaptation with the linear regression algorithms. We incorporate these adaptation algorithms into our speech synthesis system and present several subjective and objective evaluation results showing the utility and effectiveness of these algorithms in speaker adaptation for HMM-based speech synthesis.     

Inside Front Cover: Fabrication of Ideally Ordered Nanoporous Alumina Films and Integrated Alumina Nanotubule Arrays by High‐Field Anodization (Adv. Mater. 17/2005)

A simple, low‐cost approach to fabricating large‐area highly ordered nanoporous alumina films in sulfuric acid solutions through a single‐step high‐field anodization, without the assistance of any additional process, is reported on p. 2115 by Chu and co‐workers. The critical high anodizing potential in the adopted electrolyte system increases with the ageing of solutions after a long period of anodization. Correspondingly, the applicable current density for stable anodization rises significantly, thus leading to high‐speed film growth. Uniform porous anodic alumina films in sulfuric acid solutions under a high electric field of 40–70 V and 1600–2000 A m^–2 are achieved.     

Evaluation of absorption of micro-droplets on paper for creation of paper-based microstructures

This study clarifies the absorption behavior of micro-droplets of water on treated paper to support the design of functional microstructures, such as electronics and micro-fluid channels, on paper. The period of time between when a micro-droplet of water ejected from an ink-jet head lands on the paper’s surface and its complete disappearance by absorption was defined as the micro-sizing degree (MSD), and an MSD measurement method was established. The MSD was evaluated using microscopic high-speed video images of the side view recorded every millisecond. Several grades of commercially available ink-jet paper media and laboratory sheets having different levels of water repellency prepared from a pulp and a sizing agent were examined. The MSD of commercial ink-jet papers, which are known to absorb water very quickly, was 3–6 ms. Weakly sized laboratory sheets exhibited a lower MSD of 2–3 ms. The absorption behavior was analyzed in terms of the capillary pressure with and without the Laplace pressure; the theoretical and experimental results agreed moderately well. The results indicated that the Laplace pressure cannot be neglected in the analysis. The MSD of a wet surface where a preceding micro-droplet had already landed was higher than that on a dry or partially wet surface, presumably because water remains inside pores for an unexpectedly long time.     

Compositional Dependence of Normal Spectral Emissivity of Molten Cu-Fe Alloy

Metallurgical and Materials Transactions B - Normal spectral emissivity of molten Cu-Fe alloy with different compositions was measured at the wavelength of 807 nm using an electromagnetic...     

Cellulose nanofibrils as templates for the design of poly(l-lactide)-nucleating surfaces

The abilities of surface-grafted cellulose nanofibrils for the nucleation of poly(l-lactide) (PLLA) were investigated. Cellulose nanofibrils with a width of ∼3 nm were obtained from wood cellulose via the oxidation using 2,2,6,6-tetramethylpiperidiniyl-1-oxyl as a catalyst and successive mechanical treatment. The cellulose nanofibril surfaces were selectively modified with amine-terminated poly(ethylene glycol) chains, via simple ionic bonds. The PEG-grafted cellulose nanofibril/PLLA composite films were prepared using a solvent casting method with chloroform. The isothermal and non-isothermal crystallization kinetics of the PLLA in the composites was studied using differential scanning calorimetry and polarized optical microscopy. The PEG chains were densely immobilized on the surface of the cellulose nanofibril templates, which had extraordinarily large specific surface areas. As a result, the surface-PEG layers effectively increased the rate of crystallization of the PLLA in the composites. Because of the increased degree of crystallinity after the isothermal crystallization, the composites showed better heat resistance than neat PLLA.     

Simulated crepitus and its reality-based specification using wearable patient dummy

Physical therapists are trained in manual examination techniques to test the impaired motor functions of patients. In this study, we have introduced a wearable robotic dummy joint to simulate disordered joint resistances or behaviors to support physical therapists in learning such techniques. We developed a discontinuous joint friction model based on a stick-slip phenomenon to simulate knee joint resistances caused by crepitus, a typical symptom accompanied by osteoarthritis. Practicing therapists participated in a reality-based evaluation test and specified acceptable parameter sets to adjust the simulated crepitus for the exoskeletal patient robot. The simulated crepitus and wearable dummy joint are expected to support the training of physical therapists.     

Performances of metal fluoride added carbon anodes with pre-electrolysis for electrolytic synthesis of NF3

Metal fluoride added carbon anodes treated by pre-electrolysis were investigated for electrolytic production of nitrogen trifluoride (NF₃) in molten NH₄F·KF·4HF at 100 °C. The conditions for pre-electrolysis were first optimized using a graphite sheet anode as a model anode. The formation of fluorine-graphite intercalation compounds (fluorine-GICs) with semi-covalent C–F bonds, (C_xF)_n, on the MgF₂ and CaF₂ added carbon anode surface was accelerated by pre-electrolysis at potentials less than 4.0 V. Critical current densities (CCD) on the MgF₂ added carbon anodes pre-electrolyzed under various conditions were determined, and the highest CCD was 290 mA cm⁻² obtained for that pre-electrolyzed at 3.5 V for 500 C cm⁻². This anode was successfully used in the electrolysis at 100 mA cm⁻² for 290 h and the maximum NF₃ current efficiency was 55%. From these results, it was concluded that the metal fluoride added carbon anode treated by pre-electrolysis has a high potential for electrolytic production of NF₃ at higher current density.     

Effect of aromatic nitroso-compounds on superoxide-generating activity in neutrophils

Aromatic nitroso-compounds such as nitrosobenzene inhibited the respiratory burst of intact neutrophils induced by various stimulants, including phorbol 12-myristate 13-acetate and a chemotactic peptide. The compounds also inhibited NADPH-dependent oxygen consumption by cell-free preparations of neutrophils. This indicates that nitroso-compounds act directly on the NADPH-oxidase system. The inhibitory effects induced by several nitroso-compounds, 2-nitrosotoluene, nitrosobenzene, 4-nitrosophenol, and 1-nitrosopyrrolidine, were examined and their inhibition constants, the concentrations causing 50% reduction of oxygen consumption, were found to be 0.043, 0.173, 0.672, and 32.1 mM, respectively. These values correlated well with the hydrophobicity of the compounds: a more hydrophobic compound was a more potent inhibitor against NADPH oxidase, suggesting that the oxidase has a hydrophobic site(s) for interaction with the inhibitors.