Developmental and Reproductive Effects of Iron Oxide Nanoparticles in Arabidopsis thaliana

Increasing use of iron oxide nanoparticles in medicine and environmental remediation has led to concerns regarding exposure of these nanoparticles to the public. However, limited studies are available to evaluate their effects on the environment, in particular on plants and food crops. Here, we investigated the effects of positive (PC) and negative (NC) charged iron oxide (Fe₂O₃) nanoparticles (IONPs) on the physiology and reproductive capacity of Arabidopsis thaliana at concentrations of 3 and 25 mg/L. The 3 mg/L treated plants did not show evident effects on seeding and root length. However, the 25 mg/L treatment resulted in reduced seedling (positive-20% and negative-3.6%) and root (positive-48% and negative-negligible) length. Interestingly, treatment with polyethylenimine (PEI; IONP-PC coating) also resulted in reduced root length (39%) but no change was observed with polyacrylic acid (PAA; IONP-NC coating) treatment alone. However, treatment with IONPs at 3 mg/L did lead to an almost 5% increase in aborted pollen, a 2%–6% reduction in pollen viability and up to an 11% reduction in seed yield depending on the number of treatments. Interestingly, the treated plants did not show any observable phenotypic changes in overall size or general plant structure, indicating that environmental nanoparticle contamination could go dangerously unnoticed.     

Operating Penalties in Single-Fiber Operation 10-Gb/s, 1024-Way Split, 110-km Long-Reach Optical Access Networks

We report for the first time optical signal-to-noise penalties which lead to performance degradations in single-fiber long-reach optical access networks when compared to identical dual-fiber systems. A simplified architecture, with reduced optical amplifier count compared to previous work, for single-fiber operation of a symmetrical 10-Gb/s, 1024-way split, 110-km long-reach optical access network is presented and demonstrated. In addition, a possible solution to remove the optical signal-to-noise penalty is suggested     

Search for high-performance probe-fed stacked patches using optimization

High-performance circular probe-fed stacked patch antenna designs are explored through the use of numerical optimization. New trends are sought to aid understanding and to suggest novel solutions. We describe the optimization technique, present a new design trend relating efficiency and bandwidth to the choice of substrate dielectric, and propose and demonstrate a novel, optimized antenna achieving 33% bandwidth whilst maintaining greater than 80% surface wave efficiency.     

Purification of the cardiac sarcoplasmic reticulum membrane protein phospholamban from recombinant Escherichia coli

Phospholamban (PLN) was expressed in Escherichia coli as a protein fusion with glutathione S-transferase (GST). GST-PLN was mostly present in the insoluble protein fraction and accounted for approximately 50% of total insoluble protein. Attempts to suppress inclusion body formation or to use GST as an affinity-purification tag failed. A successful purification method is based on preparative SDS/PAGE and electrodialysis. From 1 g cells we typically purified 13.5 mg fusion protein with a PLN content of 2.8 mg. We genetically inserted an enterokinase (EK) protease site just in front of the PLN sequence and demonstrated the proteolytical liberation of PLN from the carrier protein. The approach described represents a substantial advancement in PLN expression and purification.     

Human stem cell assays in immune-deficient mice

Much of our understanding of the organization of the cells that comprise the hematopoietic system and the cellular and molecular mechanisms that regulate their development is derived from mouse models. However, knowledge of the human hematopoietic system and identification of human stem cells have, until recently, been hampered by the absence of in vivo assays that measure their repopulation capacity. The development of methods to transplant normal and leukemic human hematopoietic cells into immune-deficient SCID mice provides the foundation for human stem cell assays. This review will focus on recent evidence that normal and leukemic human stem cells can be assayed in these systems.     

Epilepsy, retarded growth and onchocerciasis, in two areas of different endemicity of onchocerciasis in Burundi

A high prevalence of epilepsy (up to 1.3%) was observed in an area hyperendemic for onchocerciasis in the province of Bururi, Burundi. Following this observation, epileptics and controls were examined in 2 communes (administrative units) with different endemicity for onchocerciasis. Altogether, onchocerciasis was more frequent in epileptics (81.8%) than in controls from the same households (68.3%; P < 0.05). This difference was more marked in the hyperendemic area. Other possible causes of epilepsy, including cysticercosis, were infrequent (18 possible cases among 110 epileptics). During this survey, 9 epileptics with growth retardation were seen. They showed most characteristics of Nakalanga syndrome, which was described from Uganda. All 9 such cases were suffering from onchocerciasis. These findings give more evidence of a possible association between onchocerciasis and epilepsy, and between onchocerciasis and Nakalanga syndrome.     

A method for functional magnetic resonance imaging of olfaction

A method for generating olfactory stimuli for humans within a functional magnetic resonance imaging (fMRI) experimental design is described. The system incorporates a nasal-mask in which the change from odorant to no-odorant conditions occurs in less than 500 ms and is not accompanied by visual, auditory, tactile, or thermal cues. The mask provides an ordorant-free environment following prolonged ordorant presence. Specific imaging parameters that are conducive to the study of the human olfactory system are described. In a pilot study performed using these methods, the specific patterns of activation observed converged with published experimental and clinical findings.     

Magnet Safety Assessment for ITER

The ITER magnet system consists of structurally linked sets of toroidal (TF) and poloidal (PF) field coils, central solenoid (CS), and various support structures. The coils are superconducting, force flow Helium cooled with a Kapton-Glass-Epoxy multilayer insulation system. The stored magnetic energy is about 100GJ in the TF system and 20GJ in the PF-CS. Coils and structure are maintained at 4 K by enclosing them in a vacuum cryostat. The cryostat, comprising an outer envelope to the magnets, forms most of the second radioactivity confinement barrier. The inner primary barrier is formed by the vacuum vessel, its ports and their extensions. To keep the machine size within acceptable bounds, it is essential that the magnets are in close proximity to both of the nuclear confinement barriers. The objective of the magnet design is that, although local damage to one of the barriers may occur in very exceptional circumstances, large scale magnet structural or thermal failure leading to simultaneous breaching of both barriers is not credible. Magnet accidents fall into three categories: thermal (which includes arcing arising from insulation failure and local overheating due to discharge failure in the event of a superconductor quench), structural (which includes component mechanical failure arising from material inadequacies, design errors and exceptional force patterns arising from coil shorts or control failures), and fluid (Helium release due to cooling line failure). After a preliminary survey to select initial faults conceivable within the present design, these faults are systematically analyzed to provide an assessment of the damage potential. The results of this damage assessment together with an assessment of the reliability of the monitoring and protective systems, shows that the magnets can operate with the required safety condition.     

Predictors of underlying coronary artery disease in cocaine associated myocardial infarction: a meta-analysis of case reports

A preliminary report presenting the results of fibular strut grafting in the severely resorbed mandibular and maxillary region is presented. Thirteen patients were treated due to severe resorption of alveolar and basilar bone of 49 segments of the mandible and the maxilla. Two patients additionally had pathological fractures of the mandible. In 10 cases the strut graft was harvested by means of a new minimally invasive technique. After modelling the fibular bone it was fixed to the recipient site by miniscrews or implants. After a mean follow-up period of 20 months (max. 31, min. 11 months) a retrospective analysis of clinical and radiological findings was carried out. It showed that a mean augmentation of 16 mm was achieved. Compared to other studies the fibular strut graft was resorbed less, and due to the primary stability it could be used for the treatment of fractures of the mandible. No more than natural resorption was observed when the patients received their prostheses fixed to dental implants.