Effects of the Anti-Tumorigenic Agent AT101 on Human Glioblastoma Cells in the Microenvironmental Glioma Stem Cell Niche

Glioblastoma (GBM) is a barely treatable disease due to its profound chemoresistance. A distinct inter- and intratumoral heterogeneity reflected by specialized microenvironmental niches and different tumor cell subpopulations allows GBMs to evade therapy regimens. Thus, there is an urgent need to develop alternative treatment strategies. A promising candidate for the treatment of GBMs is AT101, the R(-) enantiomer of gossypol. The present study evaluates the effects of AT101, alone or in combination with temozolomide (TMZ), in a microenvironmental glioma stem cell niche model of two GBM cell lines (U251MG and U87MG). AT101 was found to induce strong cytotoxic effects on U251MG and U87MG stem-like cells in comparison to the respective native cells. Moreover, a higher sensitivity against treatment with AT101 was observed upon incubation of native cells with a stem-like cell-conditioned medium. This higher sensitivity was reflected by a specific inhibitory influence on the p-p42/44 signaling pathway. Further, the expression of CXCR7 and the interleukin-6 receptor was significantly regulated upon these stimulatory conditions. Since tumor stem-like cells are known to mediate the development of tumor recurrences and were observed to strongly respond to the AT101 treatment, this might represent a promising approach to prevent the development of GBM recurrences.     

Chromium evaporation and oxidation characteristics of alumina-forming austenitic stainless steels for balance of plant applications in solid oxide fuel cells

The chromium (Cr) evaporation behavior of several different types of iron (Fe)-based AFA alloys and benchmark Cr₂O₃-forming Fe-based 310 and Ni-based 625 alloys was investigated for 500 h exposures at 800 °C to 900 °C in air with 10% H₂O. The Cr evaporation rates from alumina-forming austenitic (AFA) alloys were ~5 to 35 times lower than that of the Cr₂O₃-forming alloys depending on alloy and temperature. The Cr evaporation behavior was correlated with extensive characterization of the chemistry and microstructure of the oxide scales, which also revealed a degree of quartz tube Si contamination during the test. Long-term oxidation kinetics were also assessed at 800 to 1000 °C for up to 10,000 h in air with 10% H₂O to provide further guidance for SOFC BOP component alloy selection.     

In vivo evaluation of a mucoadhesive polymeric caplet for intravaginal anti-HIV-1 delivery and development of a molecular mechanistic model for thermochemical characterization

Context and objective: The aim of this study was to develop, characterize and evaluate a mucoadhesive caplet resulting from a polymeric blend (polymeric caplet) for intravaginal anti-HIV-1 delivery.

Materials and methods: Poly(lactic-co-glycolic) acid, ethylcellulose, poly(vinylalcohol), polyacrylic acid and modified polyamide 6, 10 polymers were blended and compressed to a caplet-shaped device, with and without two model drugs 3′-azido-3′-deoxythymidine (AZT) and polystyrene sulfonate (PSS). Thermal analysis, infrared spectroscopy and microscopic analysis were carried out on the caplets employing temperature-modulated DSC (TMDSC), Fourier transform infra-red (FTIR) spectrometer and scanning electron microscope, respectively. In vitro and in vivo drug release analyses as well as the histopathological toxicity studies were carried out on the drug-loaded caplets. Furthermore, molecular mechanics (MM) simulations were carried out on the drug-loaded caplets to corroborate the experimental findings.

Results and discussion: There was a big deviation between the T_g of the polymeric caplet from the T_g's of the constituent polymers indicating a strong interaction between constituent polymers. FTIR spectroscopy confirmed the presence of specific ionic and non-ionic interactions within the caplet. A controlled near zero-order drug release was obtained for AZT (20 d) and PSS (28 d). In vivo results, i.e. the drug concentration in plasma ranged between 0.012–0.332?mg/mL and 0.009–0.256?mg/mL for AZT and PSS over 1–28 d.

Conclusion: The obtained results, which were corroborated by MM simulations, attested that the developed system has the potential for effective delivery of anti-HIV-agents.     

On the linear correlation between microhardness and mechanical properties in polar polymers and blends

The tensile elastic modulus (E), yield stress (σ_Y) and microhardness (MH) of neat and binary and ternary blends of glassy semicrystalline ethylene–vinyl alcohol copolymer (EVOH), a glassy amorphous polyamide and a semicrystalline nylon‐containing ionomer covering a broad range of properties were examined. The tests were carried out on dry and water‐equilibrated samples to produce stiffer and softer materials, respectively. From the results, more accurate linear correlations were found to describe adequately the microhardness, modulus and yield stress of these strongly self‐associated polymers through hydrogen bonding. Copyright © 2003 Society of Chemical Industry     

Influence of device engineering on the analog and RF performances of SOI MOSFETs

This work presents a systematic comparative study of the influence of various process options on the analog and RF properties of fully depleted (FD) silicon-on-insulator (SOI), partially depleted (PD) SOI, and bulk MOSFET's with gate lengths down to 0.08 /spl mu/m. We introduce the transconductance-over-drain current ratio and Early voltage as key figures of merits for the analog MOS performance and the gain and the transition and maximum frequencies for RF performances and link them to device engineering. Specifically, we investigate the effects of HALO implantation in FD, PD, and bulk devices, of film thickness in FD, of substrate doping in SOI, and of nonstandard channel engineering (i.e., asymmetric Graded-channel MOSFETs and gate-body contacted DTMOS).     

Cadaver lungs for transplantation. Effect of ventilation with alveolar gas

In an effort to increase the donor pool for lung transplantation (LTX), we have demonstrated the feasibility of LTX from circulation-arrested cadavers in a canine LTX model. We hypothesized that ventilation of the cadaver lung with alveolar gas (20% O2, 5% CO2, balance N2) (AG) would be superior to ventilation with 100% oxygen (O2) after circulatory arrest of the donor. Twelve mongrel dogs were intubated, heparinized and euthanized by pentothal injection and ventilated with AG (n=6) or O2 (n=6). Four hours later, donor animals underwent sternotomy, and the lungs were flushed with cold modified Euro-Collins solution, harvested, and stored inflated in ice slush. Left lung allotransplantation was performed, and recipients were made dependent o n the transplanted lung by occlusion of the contralateral bronchus and pulmonary artery. Recipient animals were ventilated with an FiO2 of 0.4 and followed for 8 hr. Total ischemic time was 7.9 hr for both groups. Pulmonary edema developed in all recipients of AG lungs; one recipient survived the 8-hr observation period with poor oxygenation. In contrast, three of six recipients of O2-ventilated lungs survived for 8-hr with excellent gas exchange. Specimens of donor lungs before and after transplant were evaluated histologically utilizing trypan blue exclusion as an indicator of cell viability. At the time of organ retrieval 4 hr after death, 6% of cells were nonviable in the O2-ventilated cadaver lungs. Circulation-arrested cadaver lungs ventilated with 100% O2 prior to organ retrieval have superior pulmonary function after transplant compared with lungs ventilated with AG. Ventilation of cadaver lungs with AG induces pulmonary injury in this model. retrieval of donor lungs from circulation-arrested cadavers has potential for increasing the pulmonary donor pool.     

Cardiac tamponade as a presentation of primary hypothyroidism in a young woman

Pericardial effusion (PE) as a hypothyroidism associated sign, is something that can be found with relative frequency; nevertheless, cardiac tamponade (CT) as the first sign of this disease may be considered exceptional especially in young patients. We report a 31 years old woman with clinical symptoms and signs of CT that in the forward workshop was diagnosed of primary hypothyroidism as cause of the CT. We shortly describe the case and review the literature, emphasizing the importance of the knowledge of CT trigger factors in myxedematous PE, as well as its usual benign evolution with hormonal treatment, without recurrences of the CT after pericardiocentesis is performed. This justify a conservative approach, in spite of the slow resolution of the PE what can take as long as 1.5 years.     

Clinical chemistry of common apolipoprotein E isoforms

Apolipoprotein E plays a central role in clearance of lipoprotein remnants by serving as a ligand for low-density lipoprotein and apolipoprotein E receptors. Three common alleles (apolipoprotein E(2), E(3) and E(4)) give rise to six phenotypes. Apolipoprotein E(3) is the ancestral form. Common apolipoprotein E isoforms derive from nucleotide substitutions in codons 112 and 158. Resulting cysteine-arginine substitutions cause differences in: affinities for low-density lipoprotein and apolipoprotein E receptors, low-density lipoprotein receptor activities, distribution of apolipoprotein E among lipoproteins, low-density lipoprotein formation rate, and cholesterol absorption. Accompanying changes in triglycerides, cholesterol and low-density lipoprotein may promote atherosclerosis development. Over 90% of patients with familial dysbetalipoproteinaemia have apolipoprotein E(2)/E(2). Apolipoprotein E(4) may promote atherosclerosis by its low-density lipoprotein raising effect. Establishment of apolipoprotein E isoforms may be important for patients with diabetes mellitus and several non-atherosclerotic diseases. Apolipoprotein E phenotyping exploits differences in isoelectric points. Isoelectric focusing uses gels that contain pH 4-7 ampholytes and urea. Serum is directly applied, or prepurified by delipidation, lipoprotein precipitation or dialysation. Isoelectric focusing is followed by immunofixation/protein staining. Another approach is electro- or diffusion blotting, followed by protein staining or immunological detection with anti-apolipoprotein E antibodies and an enzyme-conjugated second antibody. Apolipoprotein E genotyping demonstrates underlying point mutations. Analyses of polymerase chain reaction products are done by allele-specific oligonucleotide probes, restriction fragment length polymorphism, single-stranded conformational polymorphism, the primer-guided nucleotide incorporation assay, or denaturating gradient gel electrophoresis. Detection with primers that either or not initiate amplification is performed with the amplification refractory mutation system. Disparities between phenotyping and genotyping may derive from isoelectric focusing methods that do not adequately separate apolipoprotein E posttranslational variants, storage artifacts or faint isoelectric focusing bands.