Localized corrosion of (lean) duplex stainless steels in immersion units of urban wastewater treatment plants

With lower alloying cost and higher mechanical properties, lean duplex stainless steels can be an alternative to the more commonly used austenitic stainless steels. However, these alloys are still not the preferred choice, probably due to a lack of field experience. A study was thus initiated in view of defining the limits of use of selected (lean) duplexes for urban wastewater treatment units. The present paper shows the localized corrosion performance of selected lean duplexes in chloride contaminated solutions. The results are compared with austenitic S30403 and S31603 and with the more standard duplexes S82441 and S32205. The effect of welding was also investigated. Exposures in field municipal wastewater plants were conducted for 1 year in low and high chloride content units. The results show that lean duplexes S32101 and S32202 can be used as alternatives to S30403 and S31603 in low chloride electrolytes. At 500 ppm of chloride content, duplex stainless steel S32304 showed better corrosion resistance than S30403 and S31603. For higher chloride contents (1000 ppm and above) the standard duplexes S82441 and S32205 shall be preferred.     

Long-term follow-up of a randomized post-induction therapy trial in acute myelogenous leukemia (a Southeastern Cancer Study Group trial)

A phase III clinical trial was designed to determine if more intensive induction and consolidation therapy for acute myeloblastic leukemia increases the remission rate and prolongs survival. A minor objective was to determine if the use of non-cross resistant drugs was more effective than the same drugs used for induction. Patients with untreated leukemia between the ages of 15 and 50 were given daunorubicin 45 mg/m2 for the first 3 days of a 10-day continuous infusion of cytosine arabinoside, initially at a dose of 2000 mg/m2 but reduced to 100 mg/m2 because of toxicity. Those under 36 achieving a complete remission and with an histocompatible donor were assigned to a transplant arm. The rest were randomized to receive one of three consolidation arms: A, cytosine arabinoside, 200 mg/m2 daily for 7 days and daunorubicin 45 mg/m2 daily for 3 days for three courses; B, one course as in Arm A followed by amsacrine, 120 mg/m2 daily for 5 days followed by a 5-day continuous infusion of azacytidine, 150 mg/m2/day; C, thioguanine and cytosine arabinoside, 100 mg/m2 every 12 h and daunorubicin 10 mg/m2 daily for 5 days for three courses followed by four maintenance courses of cytosine arabinoside, 100 mg/m2 daily for 5 days and daunorubicin, 45 mg/m2 for 2 days every 13 weeks. From 1981 to 1986, 398 eligible patients were enrolled and 219 achieved a complete remission. The initial induction dose of cytosine arabinoside was reduced after five of 29 patients exhibited fatal gastrointestinal toxicity. Only 11 patients were assigned to the transplant arm. There were no significant differences in the consolidation arms. The 5 year disease-free survivals were 38, 31 and 27% in arms A, B, and C respectively. Intensive consolidation therapy with the same or different drugs used in induction was as effective as lower dose consolidation followed by maintenance therapy.     

用于便携无线设备的Wireless TrenchTM技术

射频电路设计人员常用的一条经验法则是:有源器件的fT至少应为工作频率的十倍时,现代无线设备中的射频电路才会具有良好的性能.     

Agglomeration and networks in spatial economies

We consider the parallel developments in the economics of agglomeration and the economics of networks. We explore the complementarities between the productivity benefits of agglomeration and those of network linkages, arguing that networks of actors dispersed over space may substitute for agglomerations of actors at a single point.JEL Classification: D20, L14, R30     

Manufacturing method for monolithic dye-sensitised solar cells permitting long-term stable low-power modules

A manufacturing technique for monolithic dye-sensitised solar cells is presented. Encapsulated modules designed for indoor low-power applications have been prepared using industrial methods and equipment. Under certain conditions (light intensity <5000 lx, temperature between –10°C and 50°C, and relative humidity of appr. 50%), the modules have performed well and shown excellent long-term stability. Moreover, modules withstand illumination in combination with storage at 100% relative humidity. However, a certain degradation of the module performance takes place at illuminations exceeding 5000 lx and temperatures exceeding 50°C.     

Structure and surface properties of diaminocyclohexane plasma polymer films

Plasma polymers of three isomers of diaminocyclohexane (DACH) were deposited on polyethylene, SiO₂, and mica at 20°C. The deposition rate was measured as a function of plasma density and power; a maximum was observed in the latter function. The deposition rate was highest for the monomer with the highest flow rate. The film refractive index was observed to increase with both power density and the degree of fragmentation in the plasma. Film composition was measured by elementary analysis, and was found to be almost identical for each of the three isomers; a mechanism for the polymerization reaction is proposed. The percentage of primary amino groups decreased with increasing power density and with film thickness. Surface force measurements of the thickness and refractive index agreed well with the corresponding ellipsometry values in dry air, and am adhesive force, independent of power density, was measured. When the film was exposed to water vapor, it swelled considerably and the adhesion was determined by capillary forces. Associated with swelling, at high power, was an extremely regular 2-ply rope pattern of protruding material. © 1993 John Wiley & Sons. Inc.