The measurement of solar array discharges in a simulated spaceenvironment

A spacecraft in a plasma builds up charge on all the dielectric surfaces and interfaces. Once the net charge exceeds the dielectric breakdown of the material, a discharge occurs. One of the more susceptible pieces of equipment is the antenna/receiver system. The radiated E-field may be strong enough to create an ambiguous signal which may be misinterpreted by the system electronics and cause a system malfunction. A technique is developed to monitor the radiated E-field of materials discharging in an electron environment, using vacuum chambers for measuring the material discharges which are made of highly reflective materials. These chambers affect the radiated E-field due to multiple reflections from the walls. The technique developed defines a method for correcting the effects caused by the measurement facilities. The methodology is: monitor the radiated E-field with a broadband dipole antenna, and digitize the radiated signal as a function of time. Determine the frequency response of the radiated E-field using an FFT algorithm. Measure the transmission and reflection characteristics of the two-port network inside the measurement chamber, and determine the impedance network from the measured E-parameters across the frequency band of interest. Transform the measured E-field frequency response through the impedance network to obtain the frequency response of the actual radiated discharge current. Find the inverse FFT of this response to obtain the actual radiated discharge current response. This technique aids in the prediction of the E-field coupling into receive antennas on-board actual satellites     

Immunohistochemical localization of p21(WAF1/CIP1) in normal, hyperplastic, and neoplastic uterine tissues

Assuming that the chemical reactions used to synthesize a combinatorial library member are successful, then knowledge of the specific reaction sequence is equivalent to knowing the member's chemical identity. Because the determination of chemical identity is typically not automatable and requires a substantial amount of material, schemes that encode a member's reaction history onto the reaction platform are of value. The primary benefits of encoding are relational nomenclature (all methods) and automated handling (some methods). Encoding methods evaluated to date are spatial, graphical, chemical, spectrometric, electronic, and physical.     

Intubation conditions: importance of the rate of repetition of the train-of-four

OBJECTIVES: To assess that neuromuscular relaxation onset of the adductor pollicis (AP) is related to neuromuscular stimulation rate. To assess that train-of-four (TOF) at 0.05 Hz is a more accurate indicator of optimal tracheal intubation time and conditions, than TOF at 0.08 Hz. STUDY DESIGN: Prospective, comparative, randomized double-blind study. PATIENTS: Forty adults, physical class ASA 1 or 2, undergoing general anaesthesia with tracheal intubation were allocated to two groups (n = 20) according to the sequence of stimulation of the AP: either TOF at 0.05 Hz (test group) or TOF at 0.08 Hz (control group). METHODS: Induction of anaesthesia was achieved with thiopentone, fentanyl and vecuronium (0.1 mg.kg-1). Neuromuscular monitoring was obtained with force displacement transducers attached to each AP. Tracheal intubation was performed once AP muscular response obtained with TOF at 0.05 Hz for test group and TOF at 0.08 Hz for control group was abolished. Results are expressed as mean +/- SEM. Fisher exact test was used for intubation conditions comparison. Curarization time between groups was compared with unpaired Student's t test (P < 0.05 accepted). RESULTS: TOF with 0.05 Hz stimulation significantly increased curarization time: 217 +/- 7 versus 162 +/- 6 s (P < 0.001). Intubation conditions were excellent in 95% and good in 5% of patients in the study group, compared to 15 and 40% in the control group, respectively (P < 0.01) in 45% of the control group patients coughing at intubation occurred. CONCLUSION: Low stimulation rate (TOF at 0.05 Hz) of AP is a reliable technique to determine the appropriate intubation time for patients paralyzed with vecuronium.     

Comparison of Lactic Acid Productivities at High Substrate Conversions in a Continuous Two-stage Fermenter With Cell Recycle Using Different Kinetic Models

The steady-state performance of a two-stage recycle fermenter with two different types (I and II) of configurations for staging was investigated numerically for the continuous production of lactic acid. In Type I the bleed broth withdrawn from the first stage is supplied to the second fermenter, and in Type II both filtrate and bleed broth from the first stage are introduced to the second stage. Using four different kinetic models taken from the literature, the effects of operating parameters on the overall lactic acid productivities and the overall substrate conversions are examined. At moderate conversions, productivities for Type I operation are found to be higher than those for Type II and for the single-stage system. In the case of high conversions close to complete consumption, Type II operation is more efficient than the Type I and single-stage systems. For 99% conversion and 40 kg m^-3 substrate feed concentration, productivities for Type II are predicted to be 14-74% higher compared to those for the single-stage system at the same bleed ratios.     

Novel NMDA antagonists: replacement of the pyridinium ring of 6,11-ethanobenzo[b]quinolizinium cations with heteroisoquinolinium cations

Replacement of the pyridinium ring of 6,11-ethanobenzo[b]quinolizinium cations with thiazolium (4a and 4b) and N-methylimidazolium (4c and 4d) resulted in equipotent compounds in the [3H]TCP binding assay. The corresponding N-methyl-1,2,4-triazolium analogs were less potent in this assay. The thiazolium derivative 4b, with a Ki = 2.9 nM, is being evaluated as a possible neuroprotective N-methyl-D-aspartic acid (NMDA) antagonist.