Novel electrospun polymer electrolytes incorporated with Keggin‐type hetero polyoxometalate fillers as solvent‐free electrolytes for lithium ion batteries

In this study, solvent‐free nanofibrous electrolytes were fabricated through an electrospinning method. Polyethylene oxide (PEO), lithium perchlorate and ethylene carbonate were used as polymer matrix, salt and plasticizer respectively in the electrolyte structures. Keggin‐type hetero polyoxometalate (Cu‐POM@Ru‐rGO, Ni‐POM@Ru‐rGO and Co‐POM@Ru‐rGO (POM, polyoxometalate; rGO, reduced graphene oxide)) nanoparticles were synthesized and inserted into the PEO‐based nanofibrous electrolytes. TEM and SEM analyses were carried out for further evaluation of the synthesized filler structures and the electrospun nanofibre morphologies. The fractions of free ions and crystalline phases of the as‐spun electrolytes were estimated by obtaining Fourier transform infrared and XRD spectra, respectively. The results showed a significant improvement in the ionic conductivity of the nanofibrous electrolytes by increasing filler concentrations. The highest ionic conductivity of 0.28 mS cm^?1 was obtained by the introduction of 0.49 wt% Co‐POM@Ru‐rGO into the electrospun electrolyte at ambient temperature. Compared with solution‐cast polymeric electrolytes, the electrospun electrolytes present superior ionic conductivity. Moreover, the cycle stability of the as‐spun electrolytes was clearly improved by the addition of fillers. Furthermore, the mechanical strength was enhanced with the insertion of 0.07 wt% fillers to the electrospun electrolytes. The results implied that the prepared nanofibres are good candidates as solvent‐free electrolytes for lithium ion batteries. © 2020 Society of Chemical Industry     

Algebraic theory of optimal filterbanks

We introduce an optimality theory for finite impulse response (FIR) filterbanks using a general algebraic point of view. We consider an admissible set /spl Lscr/ of FIR filterbanks and use scalability as the main notion based on which performance of the elements in /spl Lscr/are compared. We show that quantification of scalability leads naturally to a partial ordering on the set /spl Lscr/. An optimal solution is, therefore, represented by the greatest element in /spl Lscr/. It turns out that a greatest element does not necessarily exist in /spl Lscr/. Hence, one has to settle with one of the maximal elements that exist in /spl Lscr/. We provide a systematic way of finding a maximal element by embedding the partial ordering at hand in a total ordering. This is done by using a special class of order-preserving functions known as Schur-convex. There is, however, a price to pay for achieving a total ordering: there are infinitely many possible choices for Schur-convex functions, and the optimal solution specified in /spl Lscr/ depends on this (subjective) choice. An interesting aspect of the presented algebraic theory is that the connection between several concepts, namely, principal component filterbanks (PCFBs), filterbanks with maximum coding gain, and filterbanks with good scalability, is clearly revealed. We show that these are simply associated with different extremal elements of the partial ordering induced on /spl Lscr/ by scalability.     

Antihyperglycemic activity of phenolics from Pterocarpus marsupium

Glucose levels in rats with hyperglycemia induced by streptozotocin were determined after i.p. administration of marsupsin (1), pterosupin (2), and pterostilbene (3), three important phenolic constituents of the heartwood of Pterocarpus marsupium. Marsupsin and pterostilbene significantly lowered the blood glucose level of hyperglycemic rats, and the effect was comparable to that of 1,1-dimethylbiguanide (metformin).     

Maternal Regulation of Infant Reactivity From 2 to 6 Months.

Previous research has investigated the effect of maternal soothing behaviors on reducing infant reactivity but not the differential effects of specific maternal behaviors on infant stress responses. The present study investigated maternal regulation of 2- and 6-month-olds' responses to an inoculation and found a significant decline with age in both the intensity and duration of infants' crying. Maternal affection and touching decreased from 2 to 6 months, whereas maternal vocalizing and distraction behaviors increased. At both ages, the combination of maternal holding/rocking and vocalizing was associated with decreases in all levels of infant reactivity. Neither strategy alone, however, was found to be effective. Feeding/ pacifying behaviors were effective only when initial distress was at a low or moderate level, which suggests that the effectiveness of maternal regulatory behaviors may depend on the intensity of infants' crying. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Hot Corrosion Behavior and Microstructural Change of Al-Gradient CoNiCrAlYSi Coatings, Produced by LVPS and Diffusional Processes

Conventional and gradient CoNiCrAlYSi coatings were produced by using low vacuum plasma spray and an additional step of diffusional over aluminizing (pack cementation) techniques on an Inconel-738 substrate. Hot corrosion of these coatings was investigated using Na₂SO₄–20wt%NaVO₃ molten salt at 880?°C for 800?h. Hot corrosion rate was determined by measuring the weight gain of the specimens at regular intervals for a duration of 20?h. X-ray diffraction, field emission scanning electron microscopy and electron probe micro analysis techniques were used to determine the nature of phases, investigation of the thermally grown oxide, examination of the surface attack and determination of the elemental distribution. The gradient coating showed better performance by re-healing alumina scale due to its possession of more β phase as Al reservoir. Results indicated that pack cementation process caused an increase in amount of aluminum-rich β phase and better hot corrosion properties of gradient coatings owing to the Al enrichment in the outer layer and rapid formation of protective oxide on the surface.     

Warranty servicing for discretely degrading items with non-zero repair time under renewing warranty

This paper considers a repair-replacement strategy for a special class of discretely degrading and repairable products under renewing free replacement warranty. Each product may experience N different working states with different exponential hazard functions, before the warranty contract expires. Once the item enters working state i (i = 1, 2, … , N), it can either fail or move to any of the subsequent working states with different probabilities, given that a transition has been made. In the former case, the best rectification action, replacement or minimal repair, regarding the failure status, i.e., the product degradation level at the failure time and the remaining warranty time, should be conducted to put the item into operation. It is assumed that replacement of the faulty item occurs instantly and the product warranty is renewed, but non-zero repair time has been included in the model. We derive the optimal replacement-repair policy to minimize the manufacturer’s expected warranty servicing cost per item sold. The Adomian decomposition method is used to find an analytic approximate solution for a special case with two working states. For N > 2, a simulation based optimization method has been developed to analyze the expected warranty cost. Some numerical examples in each section are given to clearly demonstrate the application of this model.     

An approach to power transformer asset management using health index - [feature article]

The Health Index represents a practical tool that combines the results of operating observations, field inspections, and site and laboratory testing to manage the asset and prioritize investments in capital and maintenance plans.     

On the entanglement and engineering phase gates without dynamical phases for a two-qubit system with Dzyaloshinski-Moriya interaction in magnetic field

We calculate Berry phases and entanglement of adiabatic states for a two spin-1/2 system described by the Heisenberg model with Dzyaloshinski-Moriya (DM) interaction; one of the spins is driven by a time-varing rotating magnetic field and the other is coupled with a static magnetic field. This static magnetic field can be used for controlling as well as vanishing the Berry phases and entanglement of the system state. Besides, we show that the Berry phase and entanglement are not always exact but useful to detect energy levels approach. Additionally, we find that a nontrivial two-spin unitary transformation, purely based on Berry phases, can be obtained by using two consecutive cycles with the opposite direction of the static magnetic field, opposite signs of the exchange constant as well as DM interaction, and a phase shift of the rotating magnetic field. This unitary transformation presents a two-qubit geometric phase gate.     

Residual stresses in autofrettaged vessel made of functionally graded material

We used an extension of the Variable Material Property method for materials with varying elastic and plastic properties to evaluate the residual stresses in an autofrettaged thick vessel made of functionally graded metal–ceramic composite. It is shown that the reinforcement of the metal vessel by ceramic particles, with an increasing ceramic volume fraction from inner to outer radius, increases the magnitude of compressive residual stresses at the inner section of an autofrettaged vessel and thus, could lead to better fatigue life and load-carrying capacity of the vessel. A parametric study is carried out to highlight the role of ceramic particle strength and spatial distribution, as well as the autofrettage pressure on the induced residual stresses in a thick vessel.     

Thermodynamic performance analysis of three solid oxide fuel cell and gas microturbine hybrid systems for application in auxiliary power units

In this study, three different configurations of a solid oxide fuel cell and gas microturbine hybrid system are evaluated for application in auxiliary power units. The first configuration is a common hybrid system in auxiliary power units, utilizing a fuel cell stack in the structure of the gas turbine cycle. The other configurations use two series and parallel fuel cell stacks in the structure of the gas turbine cycle. The main purpose of this research is thermodynamic analysis, evaluation of the performance of the proposed hybrid systems in similar conditions, and selection of an appropriate system in terms of efficiency, power generation, and entropy generation rate. In this study, the utilized fuel cells were subjected to electrochemical, thermodynamic, and thermal analyses and their working temperatures were calculated under various working conditions. Results indicate that the hybrid system with two series stacks had maximum power generation and efficiency compared with the other two cases. Moreover, the simple hybrid system and the system with two parallel stacks had relatively equal pure power generation and efficiency. According to the investigations, hybrid system with two series fuel cell stacks, which had 3424 and 1712 cells, respectively, can achieve the electrical efficiency of over 48%. A hybrid system with two parallel fuel cell stacks, in which each stack had 2568 cells, had the electrical efficiency of 46.3%. Findings suggested that maximum electrical efficiency occurred between the pressure ratios of 5–6 in the proposed hybrid systems.