Mathematical Modeling of Drying Processes of Selected Fruits and Vegetables

This study investigates the behavior of fruit and vegetable samples during drying. The experimental data are fitted to several different thin-layer drying models. Regression analysis is used to determine model parameters, while statistical indicators serve to evaluate the goodness of fit. The power function model gives the best fit for all examined samples. Based on this model, different drying and heat storage technologies can be combined to ensure that the required residual moisture content of an agricultural product is reached. It is demonstrated on the case of a specific Togolese processing plant that under favorable conditions, fossil fuel consumption can be decreased by 33 %.     

Crossing the Border: From Keto- to Imine Reduction in Short-Chain Dehydrogenases/Reductases

The family of NAD(P)H-dependent short-chain dehydrogenases/reductases (SDRs) comprises numerous biocatalysts capable of C=O or C=C reduction. The highly homologous noroxomaritidine reductase (NR) from Narcissus sp. aff. pseudonarcissus and Zt_SDR from Zephyranthes treatiae, however, are SDRs with an extended imine substrate scope. Comparison with a similar SDR from Asparagus officinalis (Ao_SDR) exhibiting keto-reducing activity, yet negligible imine-reducing capability, and mining the Short-Chain Dehydrogenase/Reductase Engineering Database indicated that NR and Zt_SDR possess a unique active-site composition among SDRs. Adapting the active site of Ao_SDR accordingly improved its imine-reducing capability. By applying the same strategy, an unrelated SDR from Methylobacterium sp. 77 (M77_SDR) with distinct keto-reducing activity was engineered into a promiscuous enzyme with imine-reducing activity, thereby confirming that the ability to reduce imines can be rationally introduced into members of the “classical” SDR enzyme family. Thus, members of the SDR family could be a promising starting point for protein approaches to generate new imine-reducing enzymes.     

Strength of pure alumina ceramics above 1 GPa

Up to now, commercially available alumina ceramics were claimed to have strength between 400 and 550 MPa. However, our study shows strength ~ 2 times higher for commercially available alumina than commonly believed. The average and characteristic strength, measured on 31 pure alumina ceramic discs by ball on three balls (B3B) test, were 1205 ± 93 MPa and 1257 MPa, respectively, with a Weibull modulus of m = 11.8. Tested specimens were in form of discs with a diameter of 5 mm and thickness 0.5 mm. The grain size distribution of the alumina is bimodal with an average grain size of ~ 850 nm measured at the surface. The fracture reveals a mixed transgranular / intergranular failure mode. To avoid incorporation of additional flaws, the discs were tested as sintered. The characteristic flexural strength measured in B3B was recalculated according to Weibull theory for standard 4-point bending bars of size 3 × 4 × 45 mm as bend 856 MPa. The measured strength of nearly 900 MPa shows the potential of strength for high purity alumina ceramics.     

Thermische Anmerkungen zu Zeitkonstanten von Wänden

Zusammenfassung Man erh?lt kompakte Approximationen von Laplace-übergangsfunktionen, wenn die Koeffizienten des Nenners aus den Zeitkonstanten des Systems abgeleitet werden. (üblicherweise führt dies auf das Problem der Nullstellensuche einer transzendenten Funktion.) Es ist bekannt (Gough [1], Stephenson [2]), da? für die meisten W?nde drei Zeitkonstanten ausreichen, um hinreichend genaue übergansfunktionen zu erhalten. Die Taylor-Entwicklung der Kettenmatrix im Laplaceraum wird für beliebige W?nde mit eindimensionalem W?rmestrom mit der Picard'schen Methode berechnet. Für ebene Mehrschichtw?nde ist dafür eine explizite L?sung angegeben. Die ersten N Zeitkonstanten werden n?herungsweise aus der (N+1). Ordnung der Partial-Summe der Taylor-Entwicklung berechnet. Dies wird mit einer generalisierten Pade-Approximation bewerkstelligt, die eine Totzeit enth?lt und direkt auf ein Nennerpolynom führt (ohne transzendente Wurzeln). Die Wurzeln konvergieren geometrisch zu den Eigenwerten mit wachsendem N (die Eigenwerte stellen die reziproken Zeitkonstanten dar). Die Komplexit?t der gesamten Prozedur liegt kaum über derjenigen für ein System mit konzentrierten Parametern der Ordnung N+1. Es werden Beispiele angegeben, um mit den „exakten” Frequenzg?ngen zu vergleichen.     

Bibliometric analysis of publications in experimental particle physics on cosmic rays and with accelerators

In the first part, the present paper presents a quantitative analysis of physics publications in the domain of experimental particle physics, before the Second World War in the field of cosmic rays physics and for the modern times in the field of accelerator and collision rings experiments. In the second part, a more general study is made on publications in the various fields of physics separating contributions from experiment, theory and techniques. Three aspects of physics are enlightened: physics of exploration, physics of applications, and forefront physics.     

Traumatic myocardial infarction caused by lead shot

The authors report the case of a 32 year old woman who was shot with a shotgun. Acute inferior wall infarction was detected fortuitously on electrocardiography and coronary angiography showed occlusion of the right coronary artery with lead shot. The single coronary lesion, absence, of other cardiac complications (haemopericardium, cardiac perforation, ...) and the favourable outcome with conservative medical treatment has not been previously reported to the authors' knowledge.     

Modelling asymmetry in the peripheral auditory system of the lizard

The ears of lizards are highly directional. The directionality is generated by strong acoustical coupling of the eardrums. A simple lumped-parameter model of the ear followed by binaural comparisons has been shown to perform successful phonotaxis in robot implementations. However, such a model will produce localization errors in the form of response bias if the ears are asymmetrical. We have evaluated how large errors are generated by asymmetry using simulations of the ear model in Mathematica 5.2. The study shows that the effect of asymmetry is minimal around the most directional frequency of the ear, but that biases reduce the useful bandwidth of localization. This work was presented in part at the First European Workshop on Artificial Life and Robotics, Vienna, Austria, July 12–13, 2007     

Partial or total silylation of dextran with hexamethyldisilazane

The silylation reaction of dextran with 1,1,1,3,3,3-hexamethyldisilazane (HMDS) in DMSO was studied as the first step of the synthesis of new amphiphilic polyester-grafted dextrans. According to the experimental conditions, i.e. dextran molar weight, medium temperature and reaction time, HMDS/OH ratio, addition of a catalyst and co-solvent, partially or totally silylated dextrans were recovered. The highest silylation yields were obtained with the lowest molecular weight dextrans. The increase in temperature medium and/or reaction time, the presence of catalyst or co-solvent favored the protection yield. Whatever the dextran used, complete silylation of the polysaccharide chain could be achieved by adequate selection of the experimental conditions. The thermal properties of resulting silylated polysaccharides were investigated by temperature modulated DSC. It was observed that T_g values of partially silylated dextran were maintained between 120 and 140 °C, independently of the dextran molecular weight. Interestingly, DMSO proved to behave as an efficient plasticizer of (partially) silylated dextrans. The partially silylated dextrans were efficiently used as multifunctional macroinitiators for the controlled ring-opening polymerization (ROP) of lactone. The ROP was then promoted from the remaining hydroxyl groups in the presence of tin or aluminium activator. After polymerization and ultimate deprotection of the silylated dextran backbone, amphiphilic polyester-grafted dextrans were readily recovered.     

Path‐space Motion Estimation and Decomposition for Robust Animation Filtering

Renderings of animation sequences with physics‐based Monte Carlo light transport simulations are exceedingly costly to generate frame‐by‐frame, yet much of this computation is highly redundant due to the strong coherence in space, time and among samples. A promising approach pursued in prior work entails subsampling the sequence in space, time, and number of samples, followed by image‐based spatio‐temporal upsampling and denoising. These methods can provide significant performance gains, though major issues remain: firstly, in a multiple scattering simulation, the final pixel color is the composite of many different light transport phenomena, and this conflicting information causes artifacts in image‐based methods. Secondly, motion vectors are needed to establish correspondence between the pixels in different frames, but it is unclear how to obtain them for most kinds of light paths (e.g. an object seen through a curved glass panel). To reduce these ambiguities, we propose a general decomposition framework, where the final pixel color is separated into components corresponding to disjoint subsets of the space of light paths. Each component is accompanied by motion vectors and other auxiliary features such as reflectance and surface normals. The motion vectors of specular paths are computed using a temporal extension of manifold exploration and the remaining components use a specialized variant of optical flow. Our experiments show that this decomposition leads to significant improvements in three image‐based applications: denoising, spatial upsampling, and temporal interpolation.     

Creating geometrically robust designs for highly sensitive problems using topology optimization

Resonance and wave-propagation problems are known to be highly sensitive towards parameter variations. This paper discusses topology optimization formulations for creating designs that perform robustly under spatial variations for acoustic cavity problems. For several structural problems, robust topology optimization methods have already proven their worth. However, it is shown that direct application of such methods is not suitable for the acoustic problem under consideration. A new double filter approach is suggested which makes robust optimization for spatial variations possible. Its effect and limitations are discussed. In addition, a known explicit penalization approach is considered for comparison. For near-uniform spatial variations it is shown that highly robust designs can be obtained using the double filter approach. It is finally demonstrated that taking non-uniform variations into account further improves the robustness of the designs.