0.35 μm CMOS T/R Switch for 2.4 GHz Short Range Wireless Applications

This paper describes the design and implementation of a transmit/receive switch for 2.4 GHz ISM band applications. The T/R switch is implemented in a 0.35 m bulk CMOS process and it occupies 150 m · 170 m of die area. A parasitic MOSFET model including bulk resistance is used to optimize the physical dimensions of the transistors with regard to insertion loss and isolation. The measured insertion loss is 1.3 dB without port matching. Simulations using measured s-parameters indicate that an insertion loss of 0.8 dB can be obtained with a conjugate match. The measured isolation is 42 dB and the maximum transmit power is 16 dBm.     

Triethylsulfonium Bistriflimide as the Reaction Medium in Catalyzed and Uncatalyzed Cycloaddition [4 + 2]

Triethylsulfonium bistriflimide, [S_2.2.2][NTf₂], has been tested and compared with other ionic liquids and molecular solvents as a medium in Diels–Alder reaction between cyclopentadiene and dimethyl maleate. Triflates and chlorides of different metals have been combined with [S_2.2.2][NTf₂] and the catalytic activity of the systems formed have been determined. The effect of concentration of the catalysts in sulfonium ionic liquid and reactants on the yield and endo:exo ratio has been established. The representative catalyst—Yb(OTf)₃·xH₂O in [S_2.2.2][NTf₂] has been examined in the reaction of cyclopentadiene with various dienophiles. The use of sulfonium ionic liquids permitted recycling the catalysts. For the best four catalytic systems, the products have been isolated.     

The CTFA Evaluation of Alternatives Program: an evaluation of in vitro alternatives to the Draize primary eye irritation test. (Phase III) surfactant-based formulations

The CTFA Evaluation of Alternatives Program is an evaluation of the relationship between data from the Draize primary eye irritation test and comparable data from a selection of promising in vitro eye irritation tests. In Phase III, data from the Draize test and 41 in vitro endpoints on 25 representative surfactant-based personal care formulations were compared. As in Phase I and Phase II, regression modelling of the relationship between maximum average Draize score (MAS) and in vitro endpoint was the primary approach adopted for evaluating in vitro assay performance. The degree of confidence in prediction of MAS for a given in vitro endpoint is quantified in terms of the relative widths of prediction intervals constructed about the fitted regression curve. Prediction intervals reflect not only the error attributed to the model but also the material-specific components of variation in both the Draize and the in vitro assays. Among the in vitro assays selected for regression modeling in Phase III, the relationship between MAS and in vitro score was relatively well defined. The prediction bounds on MAS were most narrow for materials at the lower or upper end of the effective irritation range (MAS = 0-45), where variability in MAS was smallest. This, the confidence with which the MAS of surfactant-based formulations is predicted is greatest when MAS approaches zero or when MAS approaches 45 (no comment is made on prediction of MAS > 45 since extrapolation beyond the range of observed data is not possible). No single in vitro endpoint was found to exhibit relative superiority with regard to prediction of MAS. Variability associated with Draize test outcome (e.g. in MAS values) must be considered in any future comparisons of in vivo and in vitro test results if the purpose is to predict in vivo response using in vitro data.     

The Reaction of Silver Ion with Gelatin

The Titov and Ratncr method and Karpova methods for evaluation of photographie gelatins are examinee. The existence of a silver complexing substance (complex “A”) having special sensitizing properties is challenged. The silver-complex “A” combmation behaves in an identical manner to silver sulphide.     

An approach for generating a tasks schedule model in web-based virtual manufacturing system of screw threads

In this paper, several web-based interfaces for user interaction and a task-oriented decision approach are proposed to build a tasks schedule model and then display the manufacturing process in a virtual environment, which is created by a geometric virtual-reality-based visualization technology for screw threads generation. The proposed tasks schedule model consists of four types of objects: virtual component, state manager, transfer operator, and flow controller. The virtual component has a geometric model with kinematics and their attributes. To control the geometric model, a component controller which models the logical aspects of a component is used. The component controller should be able to implement component-level orders by operating the geometric model. For the fidelity of the tasks schedule model, a transfer operator has a set of component-level command imitating the physical mechanism of a transfer. As a result, more accurate simulation results can be expected. The flow controller makes decisions on friable transfers based on decision parameters, which are maintained by the state manager. To have better structure and easier implementation, a virtual manufacturing platform can be modeled in a hierarchical and modular manner as an integrated system consisting of a product design suite, a web interface module, and a visualization module. Meanwhile, it provides a solution of learning of manufacturing sequences, cost effective, platform independent, and sharing visualized information over the internet for virtual manufacturing. Finally, the tasks schedule model has been implemented with an example in screw threads generation.     

Assessing the legal standard for predictions of dangerousness in sex offender commitment proceedings.

Advocates and courts legitimize sex offender commitment laws by claiming the laws confine only those who are "highly likely" to engage in sexual violence. This article proposes a definition of "probability" of future harm and assesses the legal probability thresholds commitment courts actually use. Using published information about recidivism and actuarial prediction, the authors concludes that moderate, but not extravagant, claims about legal probability thresholds are supportable but only on a rather optimistic set of assumptions. The authors recommend that sex offender commitment courts use the proposed methods to quantify judicial standards and findings about prediction. This will allow the claims for legitimacy to be more readily assessed. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Effects of methylphenidate on oxytocin and vasopressin levels in pinealectomized rats during light-dark cycle

Although previous reports have shown that methylphenidate (MPH), in addition to its known behavioral effect, can influence the hypothalamo-pituitary-adrenal axis by increasing the plasma ACTH, the pineal gland seems to be involved in neuroendocrinological processes too, e.g., in hypothalamic synthesis and release of oxytocin (OXY) and vasopressin (AVP). Therefore, a study was performed to measure the OXY and AVP content of the hypothalamus, neurohypophysis, and plasma after application of MPH in the morning and evening in pinealectomized (PE) as well as sham-operated control (SO) rats. Pinealectomy influenced both the daily pattern (reversed in the neurohypophysis) and the levels of OXY and AVP. Starting from this different situation, application of MPH produced diverse effects. Hypothalamus: PE, increase in both hormones in the morning and evening; SO, decrease in morning OXY level. Neurohypophysis: PE, increase in morning OXY level; SO, decrease in both hormones even though in the morning only. Plasma: PE, decrease in morning OXY concentration; SO, increase in both hormones in the morning and decrease in the evening. The present results indicate that MPH application influences the hypothalamo-neurohypophysial system. Furthermore, the hypothesis has been supported that this influence may be dependent on the circadian activity of the pineal gland as well.     

The preparation of TiO2–nitrogen doped by calcination of TiO2·xH2O under ammonia atmosphere for visible light photocatalysis

The investigation on incorporating nitrogen group into titanium dioxide in order to obtain powdered visible light-active photocatalysts is presented. The industrial hydrated amorphous titanium dioxide (TiO₂·xH₂O) obtained directly from sulphate technology installation was modified by heat treatment at temperatures of 100–800 °C for 4 h in an ammonia atmosphere. The photocatalysts were characterized by UV–VIS–DR and XRD techniques. The UV–VIS–DR spectra of the modified catalysts exhibited an additional maximum in the VIS region (, ) which may be due to the presence of nitrogen in TiO₂ structure. On the basis of XRD analysis it can be supposed that the presence of nitrogen does not have any influence on the transformation temperature of anatase to rutile. The photocatalytic activity of the modified photocatalysts was determined on the basis of decomposition rate of phenol and azo-dye (Reactive Red 198) under visible light irradiation. The highest rate of phenol degradation was obtained for catalysts calcinated at 700 °C (6.55%), and the highest rate of dye decomposition was found for catalysts calcinated at 500 and 600 °C (ca. 40–45%). The nitrogen doping during calcination under ammonia atmosphere is a very promising way of preparation of photocatalysts which could have a practical application in water treatment system under broader solar light spectrum.     

Determination of electrical and mechanical parameters in capacitive MEMS accelerometers using electrical measurements

This paper describes a simple technique for characterization of capacitive MEMS accelerometers. The method is based on electrical impedance (admittance) measurements of capacitive MEMS accelerometers treated as electrostatically-driven microelectromechanical resonators. By using this method, it is possible to determine some electrical and mechanical parameters including the shunt capacitance, the mechanical resonance frequency and quality factor. These parameters may serve as measures of structural integrity of the tested structures and their packages during reliability testing, for instance.     

VUV spectroscopy and low temperature thermoluminescence of LSO:Ce and YSO:Ce

Radioluminescence and UV-excited photoluminescence spectra, photoluminescence time profiles, thermoluminescence glow curves and gamma-excited energy spectra (determining scintillation light yields) of several Lu₂SiO₅:Ce and Y₂SiO₅:Ce samples were recorded. The results are analyzed with attention focused on possible correlations between trap distributions, VUV responses, and light yields. The aspect of two distinct sites occupied by Ce³⁺ ions is also discussed.