Crystallography of fracture facets in a near-alpha titanium alloy

A faceted initiation site is observed in Ti-6242 alloy for both the cyclic and static-loading test conditions. In this experimental study, the crystallographic orientation of the facets has been determined using the electron backscattered diffraction (EBSD) technique in conjunction with the quantitative tilt fractography in a scanning electron microscope (SEM). Quantitative tilt fractography analysis has been used to determine the spatial orientation of fracture facets. The results indicate that the normal-fatigue (no-dwell) fracture facets are oriented at ∼5 deg with respect to the basal plane; the dwell-fatigue fracture facets are oriented at ∼10 to 15 deg with respect to the basal plane and the static-loading fracture facets are oriented at ∼20 deg with respect to the basal plane. These crystallographic orientation determinations of the fracture facets at the crack-initiation site can be used to obtain an idea about the type of loading that produced them.     

Revised cutoff values of serum aminotransferase in detecting viral hepatitis among CAPD patients: experience from Taiwan, an endemic area for hepatitis B

BACKGROUND: To determine the best cutoff values of aspartate aminotransferase (AST) and alanine amino-transferase (ALT) in detecting viral hepatitis C infection among patients of continuous ambulatory peritoneal dialysis (CAPD). METHODS: 90 (44 male and 46 female) CAPD patients and 526 adult controls (266 male, 260 female) were enrolled. Serum AST and ALT were measured by an auto-analyser monthly. Serum HBsAg was examined using a RIA method and anti-HCV by an second-generation EIA method. The best cutoff values of AST and ALT for detecting viral hepatitis were obtained from the ROC (receiver-operating characteristic) curve. RESULTS: The prevalence of anti-HCV(+) was significantly higher in CAPD patients (16.7%) than in normal controls (4.9%), while that of HBsAg(+) was similar in both groups. CAPD patients had significantly lower levels of serum aminotransferases compared to normal controls. Mean AST were 23.8 IU/l in normal control and 18.8 IU/l in the CAPD patients (P < 0.001). Mean ALT were 21.9 IU/l in normal controls and 15.3 IU/l in the CAPD patients (P < 0.001). CAPD patients with HCV infection had higher serum AST and ALT levels than those without. However, HBV infection did not cause significant serum aminotransferase elevation in patients. The conventional cutoff values of AST (40 IU/l) and ALT (40 IU/l) for detecting viral hepatitis yielded only a sensitivity of 27.3 and 18.2% respectively; on the contrary, our revised cutoff values of AST (24 IU/l) and ALT (17 IU/l) had better sensitivities (AST, 72.7%; ALT, 63.6%). For serial aminotransferase values, the sensitivity of AST and ALT for detecting HCV were 36.4 and 27.3% by conventional criteria, and were both 81.8%, by our newly revised criteria. CONCLUSIONS: Serum aminotransferase cutoff values should be modified for screening viral hepatitis in a CAPD population. Our new cutoff criteria had important clinical implications in providing benefits of earlier detection and possible prevention from chronic hepatic deteriorations.     

Dedicated defense team strengthens liability protection

Primary psoas abscess is a relatively rare disease with highest incidence in children and adolescents. It usually presents with fever, abdominal pain and limp. Limping tends to incriminate musculoskeletal problems below the pelvis, but movement of the hip involves the psoas muscle which is mostly retroperitoneal and intimately related to pelvic and intraperitoneal organs. Although the current tendency is to use abdominal sonography, rectal examination is still a valuable step in clinical examination, and may help to assess a pelvic mass or abscess. The following case report describes the elusive nature of psoas abscess and a rare occurrence of abscess rupture and peritonitis, immediately after rectal examination.     

Measurement of the density and surface tension of Ni-based superalloys in the liquid and mushy states

The densities of three Ni-based superalloys have been measured in both liquid and mushy states by both a modified sessile drop method (MSDM) and a modified pycnometric method (MPM) for alloys CMSX-4 and CM186LC, and for CMSX-10 alloy by MSDM only. The surface tensions of liquid CMSX-4, CM186LC, and CMSX-10 superalloys were measured using the sessile drop method. All measurements were carried out in a highly purified argon atmosphere with the oxygen partial pressure of less than 10⁻¹⁹ MPa in the gas outlet. The densities of all superalloys in both liquid and mushy states were found to decrease with increasing temperature. The volume thermal expansion of each superalloy in the mushy state was found to be higher than that in the liquid state. The densities determined by different methods have been critically assessed and recommended values in both liquid and mushy states are given as a linear function of temperature for the three Ni-based superalloys. The surface tension of liquid CMSX-4 superalloy was found to decrease with increasing temperature, while that of liquid CMSX-10 superalloy increases with increasing temperature. The wetting behavior of liquid CM186LC on the alumina substrate was found (1) to differ significantly from that of CMSX-4 and CMSX-10 and (2) to vary with time. A HfO₂-rich layer was found in the contact area of CM186LC with the alumina substrate, which could lead to some uncertainty in the value obtained for the surface tension determined for CM186LC.     

3D design tools speed NASA space shuttle work

There will always be a premium on innovation and original approaches to old problems. Engineers and designers are constantly urged to think outside the box. In space shuttle technician Arlene S. Reese's case, she decided to think outside the world of traditional, 2D drafting. Working under tough deadline pressures for a shuttle lighting installation project, Reese and her design team decided to blend digital photographs and 3D assemblies to show other contractors precisely where and how the job should be built. The result was a faster, more effective method for planning electrical projects that has earned awards for her team and continues to produce benefits for the National Aeronautics and Space Administration (NASA). Reese and the managers at NASA say the design method can apply to many architectural and engineering disciplines.     

Ultrasound evaluation of piglet diaphragm function before and after fatigue

Clinically, a noninvasive measure of diaphragm function is needed. The purpose of this study is to determine whether ultrasonography can be used to 1) quantify diaphragm function and 2) identify fatigue in a piglet model. Five piglets were anesthetized with pentobarbital sodium and halothane and studied during the following conditions: 1) baseline (spontaneous breathing); 2) baseline + CO2 [inhaled CO2 to increase arterial PCO2 to 50-60 Torr (6.6-8 kPa)]; 3) fatigue + CO2 (fatigue induced with 30 min of phrenic nerve pacing); and 4) recovery + CO2 (recovery after 1 h of mechanical ventilation). Ultrasound measurements of the posterior diaphragm were made (inspiratory mean velocity) in the transverse plane. Images were obtained from the midline, just inferior to the xiphoid process, and perpendicular to the abdomen. M-mode measures were made of the right posterior hemidiaphragm in the plane just lateral to the inferior vena cava. Abdominal and esophageal pressures were measured and transdiaphragmatic pressure (Pdi) was calculated during spontaneous (Sp) and paced (Pace) breaths. Arterial blood gases were also measured. Pdi(Sp) and Pdi(Pace) during baseline + CO2 were 8 +/- 0.7 and 49 +/- 11 cmH2O, respectively, and decreased to 6 +/- 1.0 and 27 +/- 7 cmH2O, respectively, during fatigue + CO2. Mean inspiratory velocity also decreased from 13 +/- 2 to 8 +/- 1 cm/s during these conditions. All variables returned to baseline during recovery + CO2. Ultrasonography can be used to quantify diaphragm function and identify piglet diaphragm fatigue.     

Predicting compliance with annual follow-up evaluations in persons with spinal cord injury

In this study a representative sample of German acute care hospitals is used to describe the effects of dementia within acute care hospitals. Data from hospital patients above age 60 with the diagnosis dementia (ICD 290, 293, 294 and 310), collected over an observation period of 12 years, are compared with nondemented hospital patients at the same ages. The differences in the average length of stay between demented and nondemented patients are only relatively small in German acute care hospitals. The degree of multimorbidity is higher and hospital infections are more frequent for demented patients. The main differences occur with mortality: demented inpatients of both sexes experience a hospital mortality which is about twice as high as for nondemented patients at the same ages.     

Isolation of a genetic locus associated with metronidazole resistance in Helicobacter pylori

We examined the molecular mechanism of metronidazole resistance by constructing a lambda-Zap II phagemid expression library with genomic DNA from a metronidazole-resistance strain of Helicobacter pylori. Twenty-two clones were found to have elevated MTZ resistances in XLOLR strain of E. coli. Phagemids belonging to the twenty two clones were extracted and then retransformed into the XLOLR strain of E. coli. After MTZ selection, five clones could confer metronidazole resistance consistently. According to Southern hybridization and DNA sequencing, the five clones contained a same locus, recA. In addition, transforming the five clones into BL21 strain of E. coli produced a higher resistance to MTZ. Interestingly, electroporation of one of the five phagemid clones into two MTZ sensitive H. pylori yielded MTZ resistant strains. Comparing amino acid sequence in MTZ resistant with sensitive isolates revealed two point mutations at this locus. Above results suggest that mutation in recA may be associated with metronidazole resistance of H. pylori.     

An investigation of the unstable region for dense phase conveying in sliding bed flow

For fine powdered materials, capable of being conveyed in dense phase, a conveying region exists in which instability in flow and pipeline blockage can occur if the pressure gradient available is insufficient to maintain a minimum value of solids loading ratio. A reduction in material flow rate can also lead to pipeline blockage in this region. Conveying trials under-taken with cement are used to illustrate the nature of the problem.     

Chronic liver disease in Peru: role of viral hepatitis

Autologous or glutaraldehyde treated bovine pericardial valved patch was utilized for widening of the right ventricular outflow tract in 20 patients with tetralogy of Fallot (autologous pericardium group in 10 patients and bovine pericardium group in 10). Pericardial valve function of the both materials was evaluated by postoperative cardiac catheterization performed 1 year after the operation. There were no significant differences in pulmonary arterial and right ventricular pressures, and right ventricular ejection fraction and end-diastolic volume between the 2 groups. Pulmonary angiogram in the autologous pericardium group patients demonstrated the pulmonary regurgitation (PR) of grade 1 in 5 patients, grade 2 in 4 and grade 3 in 1. On the other hand, 1, 3 and 6 patients in the bovine pericardium group demonstrated no-PR, grade 1 PR and grade 2 PR, respectively. It was concluded that there were no significant differences between autologous and glutaraldehyde treated bovine pericardium as a material of valved patch for widening of the right ventricular outflow tract of tetralogy of Fallot.