Effects of the Anti-Tumorigenic Agent AT101 on Human Glioblastoma Cells in the Microenvironmental Glioma Stem Cell Niche

Glioblastoma (GBM) is a barely treatable disease due to its profound chemoresistance. A distinct inter- and intratumoral heterogeneity reflected by specialized microenvironmental niches and different tumor cell subpopulations allows GBMs to evade therapy regimens. Thus, there is an urgent need to develop alternative treatment strategies. A promising candidate for the treatment of GBMs is AT101, the R(-) enantiomer of gossypol. The present study evaluates the effects of AT101, alone or in combination with temozolomide (TMZ), in a microenvironmental glioma stem cell niche model of two GBM cell lines (U251MG and U87MG). AT101 was found to induce strong cytotoxic effects on U251MG and U87MG stem-like cells in comparison to the respective native cells. Moreover, a higher sensitivity against treatment with AT101 was observed upon incubation of native cells with a stem-like cell-conditioned medium. This higher sensitivity was reflected by a specific inhibitory influence on the p-p42/44 signaling pathway. Further, the expression of CXCR7 and the interleukin-6 receptor was significantly regulated upon these stimulatory conditions. Since tumor stem-like cells are known to mediate the development of tumor recurrences and were observed to strongly respond to the AT101 treatment, this might represent a promising approach to prevent the development of GBM recurrences.     

Chromium evaporation and oxidation characteristics of alumina-forming austenitic stainless steels for balance of plant applications in solid oxide fuel cells

The chromium (Cr) evaporation behavior of several different types of iron (Fe)-based AFA alloys and benchmark Cr₂O₃-forming Fe-based 310 and Ni-based 625 alloys was investigated for 500 h exposures at 800 °C to 900 °C in air with 10% H₂O. The Cr evaporation rates from alumina-forming austenitic (AFA) alloys were ~5 to 35 times lower than that of the Cr₂O₃-forming alloys depending on alloy and temperature. The Cr evaporation behavior was correlated with extensive characterization of the chemistry and microstructure of the oxide scales, which also revealed a degree of quartz tube Si contamination during the test. Long-term oxidation kinetics were also assessed at 800 to 1000 °C for up to 10,000 h in air with 10% H₂O to provide further guidance for SOFC BOP component alloy selection.     

In vivo evaluation of a mucoadhesive polymeric caplet for intravaginal anti-HIV-1 delivery and development of a molecular mechanistic model for thermochemical characterization

Context and objective: The aim of this study was to develop, characterize and evaluate a mucoadhesive caplet resulting from a polymeric blend (polymeric caplet) for intravaginal anti-HIV-1 delivery.

Materials and methods: Poly(lactic-co-glycolic) acid, ethylcellulose, poly(vinylalcohol), polyacrylic acid and modified polyamide 6, 10 polymers were blended and compressed to a caplet-shaped device, with and without two model drugs 3′-azido-3′-deoxythymidine (AZT) and polystyrene sulfonate (PSS). Thermal analysis, infrared spectroscopy and microscopic analysis were carried out on the caplets employing temperature-modulated DSC (TMDSC), Fourier transform infra-red (FTIR) spectrometer and scanning electron microscope, respectively. In vitro and in vivo drug release analyses as well as the histopathological toxicity studies were carried out on the drug-loaded caplets. Furthermore, molecular mechanics (MM) simulations were carried out on the drug-loaded caplets to corroborate the experimental findings.

Results and discussion: There was a big deviation between the T_g of the polymeric caplet from the T_g's of the constituent polymers indicating a strong interaction between constituent polymers. FTIR spectroscopy confirmed the presence of specific ionic and non-ionic interactions within the caplet. A controlled near zero-order drug release was obtained for AZT (20 d) and PSS (28 d). In vivo results, i.e. the drug concentration in plasma ranged between 0.012–0.332?mg/mL and 0.009–0.256?mg/mL for AZT and PSS over 1–28 d.

Conclusion: The obtained results, which were corroborated by MM simulations, attested that the developed system has the potential for effective delivery of anti-HIV-agents.     

Influence of device engineering on the analog and RF performances of SOI MOSFETs

This work presents a systematic comparative study of the influence of various process options on the analog and RF properties of fully depleted (FD) silicon-on-insulator (SOI), partially depleted (PD) SOI, and bulk MOSFET's with gate lengths down to 0.08 /spl mu/m. We introduce the transconductance-over-drain current ratio and Early voltage as key figures of merits for the analog MOS performance and the gain and the transition and maximum frequencies for RF performances and link them to device engineering. Specifically, we investigate the effects of HALO implantation in FD, PD, and bulk devices, of film thickness in FD, of substrate doping in SOI, and of nonstandard channel engineering (i.e., asymmetric Graded-channel MOSFETs and gate-body contacted DTMOS).     

The cellular trafficking and zinc dependence of secretory and lysosomal sphingomyelinase, two products of the acid sphingomyelinase gene

The acid sphingomyelinase (ASM) gene, which has been implicated in ceramide-mediated cell signaling and atherogenesis, gives rise to both lysosomal SMase (L-SMase), which is reportedly cation-independent, and secretory SMase (S-SMase), which is fully or partially dependent on Zn2+ for enzymatic activity. Herein we present evidence for a model to explain how a single mRNA gives rise to two forms of SMase with different cellular trafficking and apparent differences in Zn2+ dependence. First, we show that both S-SMase and L-SMase, which contain several highly conserved zinc-binding motifs, are directly activated by zinc. In addition, SMase assayed from a lysosome-rich fraction of Chinese hamster ovary cells was found to be partially zinc-dependent, suggesting that intact lysosomes from these cells contain subsaturating levels of Zn2+. Analysis of Asn-linked oligosaccharides and of N-terminal amino acid sequence indicated that S-SMase arises by trafficking through the Golgi secretory pathway, not by cellular release of L-SMase during trafficking to lysosomes or after delivery to lysosomes. Most importantly, when Zn2+-dependent S-SMase was incubated with SMase-negative cells, the enzyme was internalized, trafficked to lysosomes, and became zinc-independent. We conclude that L-SMase is exposed to cellular Zn2+ during trafficking to lysosomes, in lysosomes, and/or during cell homogenization. In contrast, the pathway targeting S-SMase to secretion appears to be relatively sequestered from cellular pools of Zn2+; thus S-SMase requires exogeneous Zn2+ for full activity. This model provides important information for understanding the enzymology and regulation of L- and S-SMase and for exploring possible roles of ASM gene products in cell signaling and atherogenesis.     

A noncompetitive peptide inhibitor of the nicotinic acetylcholine receptor from Conus purpurascens venom

A paralytic peptide, psi-conotoxin Piiie has been purified and characterized from Conus purpurascens venom. Electrophysiological studies indicate that the peptide inhibits the nicotinic acetylcholine receptor (nAChR). However, the peptide does not block the binding of alpha-bungarotoxin, a competitive nAChR antagonist. Thus, psi-conotoxin Piiie appears to inhibit the receptor at a site other than the acetylcholine-binding site. As ascertained by sequence analysis, mass spectrometry, and chemical synthesis, the peptide has the following covalent structure: HOOCCLYGKCRRYOGCSSASCCQR* (O = 4-trans hydroxyproline; * indicates an amidated C-terminus). The disulfide connectivity of the toxin is unrelated to the alpha- or the alphaA-conotoxins, the Conus peptide families that are competitive inhibitors of the nAChR, but shows homology to the mu-conotoxins (which are Na+ channel blockers).     

Heat transport in dilute mixtures of3He in superfluid4He

We report new measurements of the effective thermal conductivity K_eff and relaxation time τ in dilute mixtures of³He in superfluid⁴He, with molar concentrationsX≤10⁻³. The temperature range extended fromT≈1.4 K toT _λ. Both K_cff and τ are found to agree with theoretical predictions, in contrast to previous experiments where significant differences were observed. A new thermal conductivity cell design was used which almost completely eliminates extraneous volumes and surfaces, and the earlier results are explained in relation to these design changes.     

Evidence for the presence of sodium- and potassium-dependent adenosine triphosphatase alpha1 and beta1 subunit isoforms and their probable role in blastocyst expansion in the preattachment horse conceptus

Two Caribbean hair sheep breeds, the St. Croix (SC) and Barbados Blackbelly (BB), are found in the United States, and the SC has led to the development of the Katahdin (K), a synthetic breed of hair sheep. These breeds have mature ewe BW ranging from 32 to 54 kg (for BB and SC) and from 55 to 73 kg (K). Hair sheep and hair sheep crosses have lower rectal temperatures and respiration rates than wool breeds and a lower DMI and water intake. There are indications of increased resistance to internal parasites in hair sheep. Although hair sheep are seasonal breeders under U.S. photoperiodic conditions, they tend to perform better under accelerated lambing systems than traditional wool breeds. Fertility, prolificacy, and lamb survival is high in BB and SC, but hair x wool crossbred ewes tend to have a higher level of fertility than hair and wool parent breeds. Ewe productivity is also higher in hair x wool crosses than in wool crosses, particularly when adjusted for ewe BW or under accelerated lambing systems. Hair sheep have a lower ADG and intake of high-energy diets, as well as a lower gain/feed ratio, than wool breeds. Growth rates tend to be higher in SC than in BB. Differences in carcass characteristics are inconsistent between hair and wool breeds. Production characteristics of hair sheep, particularly hair x wool crosses, make them suitable for low-input, sustainable production systems that do not require high growth rates and large carcasses. There is a need to preserve the existing U.S. hair sheep germplasm base in support of such systems.     

Screening mixtures for biological activity by NMR

Development of the new drugs often involves the screening of compound libraries for biological activity. Currently, the biologically active component can only be identified if either a pure compound is being tested or if the components of a mixture are spatially separated, for example, on beads. Here, we present an NMR technique based on the transferred nuclear Overhauser effect (transfer NOE) that allows identification and structural characterization of biologically active molecules from a mixture. As an example we demonstrate that from mixtures of oligosaccharides only alpha-L-Fuc-(1-->6)-beta-D-GlcNAc-OMe binds to Aleuria aurantia agglutinin. The sign of transferred NOEs is opposite to NOEs of small molecules that do not bind to the protein and, thus, an unequivocal identification of molecules with binding activity is possible. Normally, the selection of bound ligands is further facilitated in that the absolute intensity of transfer NOEs is much greater than that of NOEs of non-binding molecules. In addition, transfer NOEs provide information on the three-dimensional structure of the ligands in the bound state. Therefore, measuring transfer NOEs of mixtures of small molecules in the presence of large molecules, like proteins, should significantly enhance the options for screening mixtures of compounds for biological activity.